A hodgepodge of progress: 1) I completed a mulching job for Mr. Greg's ditch bank. This was a tractor work trade. He will be preparing a 30' x 150' garden plot on our property for Jamie around Easter. 2) Getting the moster hickory logs off of the trailer was easy. I went back for the final load of logs from Mr. Jack's place. 3) Another 200+ bdft batch of lumber for Mr. Nathan. I believe he's started building a shed for his 4-wheeler and his son's go-kart. 4) Doing your own oil changes is an EASY way to save money. I changed the oil in our daily driver and the tractor. My truck needs an oil change as well, but I need to wait until I have a few days where I can dedicate to tearing it apart and figuring out where the oil leak is. I think it's the rear main seal, which won't be fun. 5) Insulation for the apartment has arrived. In real time, I've already completed the walls.
PS: Did you hear about the guy that was afraid to plant an apple tree?
He just needed to grow a pear.
BPO3 is supported by Timber King sawmills. For more information on my 1220 CRZ mill or one of
many Foley hydraulic options, go to TimberKing.com. Bad Boy 4035H tractor, 35 horsepower, 29 and a
half PTO horsepower, BBL 400 loader, 2,200 pounds lift capacity, Kioti KG4066 grapple,
really nice grapple, and a Bomalite MP360 mulcher. This is a surprisingly capable package. I say
surprisingly because with only 29 and a half PTO horsepower I can really mulch some stuff.
And only a small compact tractor, this isn't a big utility tractor, lifting 2,200 pounds at the front
with 1,200 pounds of ballast weight. This setup right here is awesome. I really like it. What I
don't like is the fact that I just realized I forgot my magnetic mount to put my camera
up on the rops like I normally do, which sucks. So I'm going to throw you on a tripod
and just get to work. Got to get some stuff done.
All righty, well there was a couple cedars that were kind of in the way and I texted them if you
wanted me to get rid of them and, well, cut the limbs, and he said go ahead and cut them if you
can. So there's the stumps. My goodness, they look small on camera. This wide angle is intense.
That one is like the smallest thing that I would consider putting on the sawmill,
but both of these are good posts for something or other. I'd hate to put those in the burn pile.
But we got all of the major junk out of the way and my strategy or my thought process was he's
only going to get to like right here with the rotary cutter because this mud starts to get up
in the bank a little bit. So I don't go crazy with the rotary with the doohickey with the thingamabob
mulcher. My goodness, the mulcher over here, like that stub right there, that stump sticking out,
he's not going to do anything backing into here with the mulcher or the rotary cutter. So
no worries there, but we got all the debris out of the way. Everything that's left won't damage
a rotary cutter and I wanted to because they were smacking me in the face for quite a while.
I wanted to get up in this tree and cut these limbs so I can get rid of this and do a better
job right here, but I couldn't get to them. And just driving on the track there and whack,
smack them, smack them all, smack a stick. And that's what we were playing for a little while.
I can't forget my jacket. I'm going to need that driving home. And we avoided all the concrete,
so that's a win. All of this over here is nice and mulched. Oh, there was a,
yep, there's the stump from the first cedar tree. That was the
medium size one. And then the larger size one is right here. Cut that down.
And yeah, piled it all up. There's another stump right there from the third cedar. That one was
too small to do anything with. Just shoved it all off over here. He's going to have a decent fire
once all this stuff dries out. And I don't think he cares about damaging anything else over here.
So good spot to burn. And of course, once he burns all this, this is a lot of good ash for him to
push back off into the garden however he wants. So that's good. I can't get any of this with my
tractor. It's just too dense with the bigger stuff stopping me from mulching the smaller stuff.
And the bigger stuff is too stuck in the ground for me to get with the grapple.
And I ran out of gas in my chainsaw. So I brought my little Top Handle Pro Yama chainsaw, which by
the way has just been so convenient for so much. Inexpensive little Top Handle chainsaw. Pretty
reliable. Well, I'd say very reliable. It's never failed me on the job. So that's good.
And I came over here and mulched up anything that the mulcher would get from the first time
I was over here that was just thrown out in the yard. So yeah, he's gonna gain quite a bit of
space over here. I think he's gonna take out all these other trees that are sticking out from the
from this little creek right here. So he's probably gonna come back and get all these.
And I think he wanted to do that because he uses the wood to cook with. So that's a win for him.
And all of this getting mulched up is a win for both of us. And I say it's a win for both of us
because, well of course, what we did here is a direct win for him.
But he's going to come and till up a 30 by 150 foot rectangle for a nice little garden plot for
Jamie. And Jamie's already just grinning ear to ear knowing that that's coming. So big win there.
All right, I am back from that mulching and cleanup job. I've got to get these, I've got to
get my trailer back in commission. I've got these two monster hickories on here and they've got to
come off. I'm not gonna be able to do it, babe. Watch out, Gracie. All right, bigger of the two
off the trailer. No new considerable damage to the trailer. Maybe, I don't know. But this hole
is facing up. So I'm probably going to put a tarp over it or something. I don't want water to just
puddle in there and then rot it by the time I get to it. That went about as well as I could
have asked for, to be honest with you. Got a lot of things going for us, I guess. The overspray,
I sprayed our anchor seal this time. The overspray with the anchor seal makes that a little slippery.
The fact that it's, the deck is still wet makes it a little slippery. This little incline on the front
of this board makes it a little slippery. And hydraulics make it easy to move. Man, that tractor
looks like it's, oh it is off on an angle. All right, so yeah, that was no news is good news,
right? No, no bad news is good news. I needed to get to my trailer because now I've got to go back
to Jack's and get the rest of the logs. I've got one more hickory from this tree. It's the next one
up from, that's the base. This is the next one up. And then the next one after that is the log I'm
going to go get today. So we're going to have a bunch of branches and whatnot probably in that.
That might make some for some interesting figured lumber, slabs, whatever. Definitely overloaded
the trailer, but it's home. And all of the logs at Jack's are accounted for. So no more log trips from
Jack. I got to take a break from all this stuff anyway. I got so much other stuff going on.
But the majority of this is firewood logs. And that's of course a saw log right there, that hickory.
This is a saw log. This is one of the red oaks that I initially did not get from the
first batch of logs. It's 16 and a half feet long and I'm going to leave it that way. And that way I
can, you know, have options if somebody wants something really long or if I need something
really long. There's no sense in cutting it in half. Let's see, sawmill, sawmill, firewood, firewood,
firewood, sawmill, firewood, firewood. Not a bad haul, but like I said, I almost guarantee I'm
overloaded on this trailer. And I backed up just so perfectly if I do say so myself. Other things
that need to happen today. I've got to run right back to town because the old battery on here, and
it is old, that battery is not holding a charge long enough to, or strong enough to start it. I
can jump start it just fine, but got to get a new battery for this. And then I've got to get the oil
to change the oil in the tractor. I already have the oil to change the oil in the truck, which I
have to do. And I've already got the oil to change the oil in the daily driver, which I have to do
as well. So maintenance is coming up. Today is one of those days where you wake up and you bundle up
and you get all the jackets on and the extra hat on, and right around lunchtime be shedding all
that stuff because it's going to be too warm. I think the high is in the 60s today. And today
we're running the saw mill. I've got a bunch of stuff that I need to cut up before I start
cutting though. I want to move this bunk 90 degrees right there. And the reason is
unloading it. I'm sorry. Just, well, I guess it is. Yeah. Unloading it from this direction
of the tractor. This is all kinds of wonky in different directions and trying to get the
pallet forks level because this is level trying to get them level on uneven ground has always
just been a huge pain in my rear, if you know what I'm saying. So I'll turn this 90 degrees
and then we will move this stuff when I need to use the tractor to get it out. And that should
be much easier to actually get it out of here. So continuous refinement of the process.
And of course, I haven't put these underground just yet waiting for the appropriate conditions.
And that 10 foot bunk is pretty much gone now. So that's good. Today we're focusing on
8 foot material. I have a bunch of 8 foot logs still ready to go. 1, 2, 3, 4, 5, 6, 7, 8, 9,
10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 8 foot logs on this one. 20, 21, 22, 23, 24, 25, 26,
27, 28, 29, 30, 32, 33, 34, 35, 36, 37, 38, 39. I have 39 8 foot logs that I would like to process
sooner rather than later. So that's what we're going to be hitting today. Mostly 8 footers and
none of these are like monsters. So it should go by pretty quick. All the material should be pretty
easy to manage and handle. So that's good. Nathan and I have been doing a little bit more trading.
So I owe him 200 plus board feet of pine. And also I want to cut up some more because
another gentleman close to me named Josh is buying a bunch of this stuff for his house renovation.
So that's two motivating factors to get out here and get a lot of stuff cut. Also, I think I
mentioned it previously, all of these lumber bunks, we want to keep shifting that way. So no more
adding to this pile and instead creating more piles that way for a couple different reasons.
First, it's in the way. This is kind of our front yard area if we have a front yard area.
But also because that side stays drier. That's the highest side of the clearing and I need to
keep the material on the dry side. That way I can easily access it. Opposite of the dry side,
the wet side over here, this 10 foot bunk that I finally, finally started to get rid of, finally
got rid of. The three logs that are there, I'm just going to keep as runners to go on the ground
for when I move over there. So I can actually move this once it dries up a little bit more.
But that was just a horrible location. That was the first bunk that I moved over here, plopped
it down and said, let's get this thing started. And then as soon as it got filled up, I said,
that's, that's a horrible location for it. So it happens. All right, enough talking. Let's get the,
let's get the show on the road.
Hey, this is not a place when we get started for you to come walk through. What is it you need?
Hello.
All right. The goal was 200 board feet in four quarter material or one foot material. There's
181 board feet and four quarters to, I'm sorry, eight quarter. The two inch thick material
is 37 board feet and the decimal place on each one combined gives us 218.8 board feet. 200 was
the goal. Sun is starting to set and I forgot we've got to run to grandma's house tonight. So
I was going to continue on, but this is it. The goal is around 200 board feet and that's 218
board feet. So that's good. One thing that I've been wanting to do for a while is slap a piece
of OSB on here so I can pull back and it slams down on here and keeps going rather than getting
stuck in each one of these bunks. And that's exactly what I did. I happen to have a piece of
OSB that's 30 inches wide and however long this is, I set it up there and I said, Hey,
that'll work. And all I did was screw a two by four to the bottom as a cleat
to stop it from sliding that way. And that'll work.
So there's that. I think we did four logs to get all this.
Yeah. Four logs. I've got to do something other than what I'm doing for these, these slabs,
these off cuts. I'm, I'm destroying sawhorses. I could brace the sawhorses even better.
No problem there. But, uh, as I grab it with the, with the grapple on the tractor,
it still puts a lot of lateral stress on the, on the, um, sawhorses. So I think,
I think what actually makes the most sense now that we're set up to pull back this way. Oh yeah.
And I did these sawhorses too. So you pull back this way, pull back this way, clean it up and
pull right to the, to the, um, pallet. I cannot speak today for the life of me. Uh, and this is,
this is the best workflow by far. I cut these sawhorses down. So they're a little bit lower
than the deck of the sawmill. And, uh, Jamie said that this worked out quite well. So that's a win,
but during this whole process, pulling back, it makes more sense to pull everything back this way
for the slabs rather than use those sawhorses over there that I've been putting up forward,
because they're on an angle, which means the tractor has to be on an angle, which it kind of
is to grab them right there to put them off over there. And we can't really find a good
use for them just yet. There's way too filthy and dirty to put back on the mill to run them
down even thinner. So I can run them through my chipper because we really want wood chips.
That's not really the best option. So we've just, we've just been burning them. Well,
it doesn't make sense to move them from here to there to burn them over there.
So, um, once I get these pipes underground, I'm probably just going to put two logs right here
and then forget the sawhorses, just toss them right on these logs. And as I'm loading a log,
I can come back this way and grab a couple or stack and toss them into the fire pit and
grab another log and, you know, constant evolution of this process. But,
but we did pretty good that right there. Is that four logs? Maybe we did five or six logs. I don't
know exactly how many logs we did and Holy moly. You see the wave on that one? Ooh, I could surf on
that board. Yeah. I was real bummed about that. The blade was getting really, really dull. And
I'm like, Oh, just one more pass. And the blade said, no, I don't want any more passes. It didn't
break, but I had to stop mid cut and wedge the cut side and back out just nice and neatly and
that was kind of a bummer.
Good old boring maintenance kind of a morning so far. I've got this red bucket that I use as
a secondary bucket because this is what's needed to drain the hydraulic oil out of the tractor.
Tractor takes 10 gallons of hydraulic oil. So I needed something big while that something big is
also convenient as a secondary drain off for my normal oil pan. And then that big red one
gets sucked up with this drill powered pump right here into the big oil can, which has been nice
to have a dedicated oil bin that I can pump out as needed into another bucket for
other things. We've just mainly been using this to get fires going really good. Anyway, I'm going
to drain all that a little bit later. This is what I've been using in the car. This is a 20,000 mile
synthetic oil. And past two oil changes, I've changed it just under 10,000 miles because the
filters are not recommended for anything more than do not exceed 10,000 miles or 12 months.
So filters are the weakest link there. And if I'm going to change the filter, you know what? Might
as well change the oil. Yeah. According to the box, that's according to the jug, that's half the
life expectancy, but I would much rather I would much rather just change it and be done with it.
This is a family vehicle that's going to last us a really long time. The air filter in the tractor
was horrible, black and dusty because we just, uh, I just used the tractor to move a bunch of,
um, burnt material out of the burn pile and restack it. And it's really, really dusty with
that. So getting that change was nice as well. The Toyota oil filter is one of these, um,
disposable or changeable inside filters. You know, it's not like a traditional oil filter,
which adds another process and some extra O-rings and you have to have a proprietary tool to get
the housing off. And it's kind of annoying, but Toyota's last a long time. So I'm okay with that.
And of course, this is the oil that I put in the tractor and that's what, uh, it's what all the
cool kids on the internet say to you. So that's what I use. And 4.3 quarts is what it says,
but it only took an exact four quarts. So one of these jugs, so got another jug for the next oil
change, which will be at, if I'm not mistaken, hour 700, I just hit 500 on the dash. So, uh,
I guess I'm good for basically another year, the way things are going. We also took delivery
of some insulation. This is DIY spray foam insulation that we're going to put in the shop,
in the shop, in the apartment. I keep calling this thing, the shop, in the apartment,
in the future break room, into that big box inside of this box. And, um, yeah, more on that
in the next video or the next video after that, or the next video after that.