Air Dry Clay with Silicone Molds Want perfectly shaped clay pieces without all the sculpting? In this video, I’ll show you how to use air dry clay with silicone molds to create beautiful, detailed shapes with ease! Whether you’re crafting for fun, making gifts, jewellery, or home decor — this is a must-know technique - a really great tip to be found here. Air dry clay is perfect for any DIYer or clay enthusiast, No baking required, Easy to use with minimal tools, Great for beginners and pros alike, this silicone molde technique can be used to form clay and polymer clay too.
#airdryclay#redrockingbird#craftprojects I am an amazon affiliate so if you purchase from the above link I may make a small percentage to help support the creation of these videos, but you pay no more.
Air Dry Clay, Air drying Clay, silicone moulds, Air Dry Clay with Silicone Molds - My Tips & Tricks, air dry clay, how to shape air dry clay, air-dry clay, air clay, air drying clay, air hardening clay, how to make delicate shapes from clay, intricate air dry clay, red rocking bird, Sarah reeves, Using Air Dry Clay With Decorative Moulds - Complete Beginner's Guide,MAKING THINGS : AIR DRY CLAY, Making Ceramic and Air Dry Clay things Studio Days, silicon molds and clay, air clay in moulds, clay
Air dry clay with silicon moulds. It's a common question and with these tips and tricks,
you'll hopefully find it really easy and this can also be used for all different kinds of clay.
The air dry clay will take shape much easier if it's nice and soft.
So take a small piece and knead the clay between your fingers.
If the clay is dry, crumbly and cracked to begin with,
then it's more likely to crack when it goes into the mould and dries.
Some people like to dust the mould with cornstarch or baby powder,
but I personally don't do this because it would add another step to the process
and another item to the supply list.
The clay is now nice and soft and I've smoothed out all the edges so I have a lovely smooth ball
of clay which I can turn into a similar shape to the mould, in this case a nice long sausage,
as the mould is slightly long in shape.
Then starting on either the left or the right of the mould,
really using my thumb and fingers to push all that clay down into the gaps.
Using one piece like this for the full mould and pushing it as we go along
would just make sure there's no more cracks and no join points and no places it can crack.
As you have a go at this, you'll find your own flow, your own way of doing it.
I like to often go in circular motions as you see there.
It also depends on the shape and the design of the mould,
but that pressure downwards is what's really important here, all over the entire mould.
Or if you prefer to press the clay in and overfill the mould,
you can use something like a ruler to scrape away the top edge.
This can drag a little as you see here and make it a little bit bumpy,
but not to worry, that's easily fixed and whichever way you've chosen to do,
you can take a little bit of water on your finger and smooth everything out.
Alternatively, take a damp sponge or a wet wipe
and tidy up the back of the clay using circular motions like this.
Whatever your shape of mould, add lots of pressure
and make sure it's nice and neat and tidy on this surface.
The clay is really sticky still, so to remove it at this stage it would be really fragile.
So my best tip is to put this in the freezer for about 30 minutes.
When working with some smaller moulds, take a smaller piece of clay,
give it a nice knead and make sure there are no cracks on the surface
and add plenty of pressure.
This is a slightly harder mould and it works well with any kind of silicone moulds,
even with plastic moulds.
Pressing and working the clay from the outside in also gives a really neat shape.
Air-dry clay can be sanded and trimmed once it is fully dry,
but if you do most of the work now, then none of that is needed.
These are tiny little flowers and you really can capture the most intricate of details.
If you do enjoy my creative videos, please do comment below and click the like button.
I have many more creative projects to share with you very soon.
30 minutes later, my mould and clay are fully chilled
and this is my preferred method to demould.
Using the flat surface to make sure we keep that clay lovely and flat.
Gently teasing the mould away from the clay, it does come away really easily.
It's just good to go nice and slowly and gently.
The clay has not dried yet, it's just chilled and slightly frozen,
making it much easier to work with.
As you can see, I can still hold it.
If this was wet, it would be quite hard to hold in this way.
The strawberries are also frozen and easily pop out.
While the clay is still firm, add some glue on the back.
This is just a white craft glue.
I've left mine just a little bit too long and so it's actually defrosted.
So take them out of the freezer just as you need them, not like I did here.
Then gradually as they start to defrost, which isn't long at all,
they can start to bend around a surface like this glass jam jar.
White craft glue holds them in place really well,
but make sure you just put a thin film of glue.
Otherwise, as I did here, I put far too much glue on
and as it was drying, the clay slid down the glass
and completely solidly stuck in place right where I didn't want it.
And just to show you, demoulding the wet clay without freezing it,
it is so much harder to demould and as you go it starts to crack.
And even though I'm being really careful,
this one cracked in several places.
So I definitely recommend the freezer method.
Using this method is also really good
if you want to create lots of the same piece from one mould.
For the flowers, I pressed the clay in,
popped them in the freezer, really not for very long because they're smaller,
popped them out, let them dry, repeated this again
and you can keep doing that for as many of the pieces as you want
and let them just dry.
Then I use these flat embellishments, again with some white glue,
to attach them to whatever you want to attach them to.
This is a metal jam jar lid that I've coated in a layer of gesso.
I'm now just smoothing out the glue with a paintbrush.
Once you've sculpted or shaped the air-dry clay like this and let it dry,
you can also add it to canvas and wood.
Once this is fully dry, I'm adding a coat of gesso
so that I can paint any colour over the top.
When you have lovely detail like this,
it's nice to get a dry brush of a contrasting colour
and really bring out all those details.
I hope you've enjoyed this video of air-dry clay and silica moulds.
I have lots of creative videos for you to come and enjoy,
so thank you for watching and I'll see you in my next video.
Bye for now.