1857 Seth Thomas weight driven clock lives again

Chrono Chronicles
8 followers
Jan 7, 2026
okay this thing has been running for about five minutes the weights are strong bought them on
ebay movement is a replacement movement the one that was in it was so badly worn
i really didn't trust it the screws going into the back there and the two screws that hold the
tongue on it were stripped out so i filled the holes with toothpicks and then filled the holes
with the homer's glue or aliphatic glue and then grind them off smooth the sticker on the back or
the label is the original label it's just about ready to disintegrate and i decided that the only
way to save it was to use decoupage so that's decoupaged into place the case was completely black
black there's a few places where there's some missing veneer down at the bottom there's a few
pieces missing one end over here there was a missing piece of veneer but if i was as old as
this clock i'd probably have a few pieces missing too but the big thing is that the finish has come
back pretty nice i used grain alcohol denatured alcohol and about six seven rags that i just kept
wiping and wiping and rags came out black and finally some grain started showing through and
i decided to stop when the amount of black stuff coming off was diminishing
um it's keeping fairly good beat it's an easy clock to set up it really is
but i think i'm going to turn it now so you can hear it chime
these clocks only chime on hour now it's going to go into go into warn plenty early
bang there's warn another problem somebody had tried to adjust the striking
time of the hand so the hand would strike straight up and down but with the old movement
the hand had to be bent and on this one i bent it back up straight so that the square hole in the
center of the hand shaft is perpendicular with the hand itself and it seems to strike
right on the nuts so let's just watch it here any second now it's going to strike
all right next thing i'll put the face on and we'll get some more pictures
