Shattered silk is a sad part of dealing with antique garments. Some pieces are just cracking along the folds, others nearly shredded, and some have only the tiniest scraps left as evidence. But what causes this damage? And WHY did they process silk this way?
The simple answer is- weighting. Weighting silks was a way to gain back the literal weight lost in de-gumming the fibers unspun from the cocoon. It could add lustre, weight, crisp hand, and even scroop. But weighting was often done with iron salts or other metals, meaning a delicate fiber was now covered in minute sharp particles. So within months, it could begin to degrade and fall apart. And sometimes the chemicals themselves would start to interact, breaking down the textile more or even making it flammable!
Numerous accounts of spontaneous combustion of silk warehouses or transports appeared in the 1870s as well. The chemical compounds, when heat and oxygen levels were right, could catch fire on their own! Steamships even had to ban carrying weighted silks for a time as most were produced in France and Germany, then shipped across the water to England or America. Enough documented cases (and some scientific experimentation) support the veracity of these stories- meaning that for once, it's not just another deadly Victorian myth! There really was danger in silk. Not so much for the average person, but occasional stories of clothing stuffed in a trunk catching light do exist as well.
00:00 Introduction 02:52 Weighting Process 04:41 History 08:12 Flammability 10:08 Fraud 13:28 Sinking Ships & Burning Bustles 17:23 Moderation 19:47 Fast Fashion 24:18 Regulations 28:33 Changing Styles
AI Generated·May contain errors
Hello everyone, and welcome back. I was recently doing a live cast for my Patreon,
and I was showing off two of my antique 1890s bodices, one of which has a fair amount of
damage on the sleeves. It's cracking and splitting along all of its folds. Now, generally,
we refer to this as shattering silk, and it is the result of weighted silk. Well, I had a question
about whether or not the silk that I was planning on using to reproduce it in, the modern silk,
would still be weighted like the historic silk was. And though my immediate response was, well,
no. I realized I didn't actually know the details of this. I didn't know when weighted silk stopped
being a thing. When did it start being a thing? What exactly was the process? As we're going to
get into, I knew that it involved lots of tiny little bits of metal that end up being embedded
into the textile and sort of shredding it with time. But why? Why did they do this? Why was this
a common thing? And as I started getting into the research, I, of course, found more questions,
like you do, because I kept coming across the phrase, spontaneous combustion. And I don't know
about you, but when I think of spontaneous combustion and silk in the 19th century,
I have this perfectly wonderful mental image of women in their bustle dresses suddenly bursting
into flames like little fireflies walking up and down the street with flaming bustles. And then
that's just stuck in my head and I can't get it out. And I need to know more. I need to understand
what is going on here from a scientific and historical perspective. But before we get into
that, I want to take a moment to thank this video sponsor. Magellan TV is an amazing video streaming
service full of documentaries that was founded by a team of filmmakers. Their library has over
3,000 videos on ancient and modern day biographies and battles and even science and nature. It's an
exciting way to expand your knowledge of the world around you and has become an essential
part of my everyday education. Lately, I've realized how much I have left to learn about
the global trade and development that brought fashionable items to the doorsteps of the average
person. I came across the magnificent three cities that shaped history and found so many answers to
my questions. This show covers the growth of Amsterdam, London and New York City through
civil engineering and economy and trade, not just in how the architecture and layout developed,
but in how people lived, worked and interacted with the cities as they changed. The everyday
act of shopping for all classes of people really did shape our modern world. Magellan TV's library
is full of shows like Magnificent Three and growing rapidly. I am always finding new titles
to add to my watch list. So if you want to explore the world around you, both past and present, click
the link below to get your first month free and you'll be discovering all that Magellan TV has
to offer instantly. Thanks again to Magellan TV for sponsoring this video. So let's start off.
What is weighted silk? Because that's a pretty important place to start. What it technically
means is that as silk as a fiber is being processed, it's unspun from the cocoons and goes
through its first levels of processing, it is de-gummed. Meaning that there is a gummy substance
on it that helps actually adhere it into a cocoon, which makes perfect sense, and that has to be
removed in order for the silk to be properly processed, spun, dyed and woven. So once that gum
is removed, it actually loses about 25% of its weight. So you have a much finer, lighter weight
fiber, which we tend to think of silk as fairly fine, but there are many silks that are meant to
be very luxurious, very full, and not surprisingly, the more silk you pack into something, the more
expensive it gets. So you want very often to have heavier, weightier silks in a lot of time periods.
This means that in the process of dyeing the textile, in the process of finishing the textile,
some residue will be left on the textile. Some weight will be added back, whether you are simply
dyeing it a color or whether you are trying to add in other attributes. If you want the silk to be
heavier, if you want the silk to be crisper, if you wanted to have that rustling silk noise called
scroop, if you want to have it have more luster or less, all of these things are attributes that
you can adjust for in the chemical processing of your silk. So weighted silks essentially have
chemical things done to them to change their attributes, which in turn changes their weight.
It makes them heavier and more luxurious and fuller, in addition to other attributes that
might be added or taken away by those chemicals. Now this is not a modern chemical process only.
We can find evidence of it occurring all the way back at the beginning of the 17th century,
where there were actually laws put into place in England that required that you couldn't have more
than six ounces per pound of extra weighting. The weighting that was done at that point tended to be
from the mordants and the colors that were being used for dyeing. So it could be iron compounds or
tannins, most commonly, that were being used as weighting on the silk to give it the color, to give
it the finish, to give it the color fastness, to give it the weight that it needed, all of those things.
But this is a problem when silk is sold by weight. So the heavier a silk is, the more silk fiber
should be in it, therefore it is more expensive. It becomes an issue of essentially lying about the
actual quality of the silk after a certain point. They expect something to be left on there. You
can't dye a textile without that process happening, but there has to be a limit to it. And so that's
what they came up with at the beginning of the 17th century. Now that is what carries on through
the period of natural dye. There are, of course, limitations to this because tannins, basically the
same thing that we're thinking of with tanning leather, makes the textile dark. So this is most
commonly used for very dark colors and most often black. When we reach the 19th century, getting
nearer to the mid-19th century, aniline dyes start coming into play. And different colors are
achievable in different ways, require different mordants to hold them into place, require an
entirely different process and different chemicals. And this is when the issue of weighting really
takes off. Midway on in the 19th century, we start to see more and more references to adulterated or
weighted silks. It is at this point that they are starting to use a sugar of lead as a weighting.
This is something, because it is a lighter color, that can be added to any color of silk. It's not
just for the darker tones. Now obviously we know today that that is potentially dangerous, and they
did too. They understood that lead was poisonous, and they understood that it was dangerous to not
only the people making the fabric, but the people who then had to work on it to make it up into the
garment, and the people that then wore the garment. They were very aware of that, and one of the
articles that came across even recommended testing your silks by way of smell and taste to make sure
that they were not heavily adulterated with lead. A little bit could be fine, but a lot of adulteration
meant that the fabric would actually be potentially weakened, and of course meant that it could be
potentially harmful to the health of anyone who was in contact with that garment. So there is
already a major concern with this, because lead is something that they know is unsafe. So there's
already concern about the side effects of waiting for silk. According to one article from 1877,
this practice supposedly started in 1859 after there was a disease that decimated the silkworm
population, meaning that the prices of silk rose dramatically, the demand was still there,
and they had to come up with some sort of solution to balance out the desire for silk and the lack
of silk. Thus waiting came into play, because you could have heavier, more luxurious textiles that
required far less silk. Now this is not something that I can verify is true, this is just one of the
few references that I have seen. Most of the modern documentation on the waiting of silk seems to
be kind of muddled as to where exactly it started in the 19th century. So this is the closest that
I've found so far. Additionally, one of the references that I came across referred to it as
charged silk, and mentioned that once it reached around 215 to 225 degrees Fahrenheit,
the fabric had a tendency to self-ignite and to spontaneously combust, but it did require
fairly high heat. That is not a high heat level that we're going to naturally see in the world
around us, unless we're including fire. So this is more of an issue when it's being stored in
different locations, and might have a fire in the building, then it's going to catch flame really
easily. So we're already starting to see issues with fire pretty early on in the days of weighted
silk. In 1870, a warehouse in Paris caught fire, and was later blamed on the fact that it was holding
a great quantity of black silks, which were thought of to be the most likely to be adulterated,
and the most likely therefore to catch flame. In 1872, the same thing occurred in New York,
and stories like this continued on through the 1870s. It's also around this time that the
progression of aniline dyes was taking place, and so new colors required new chemical compounds in
order to be created or mordanted. So new discoveries of things like salts of iron,
and astringents being used for weighting of silks, or salts of tins and cyanides,
were also being used as new types of dyes required new types of chemicals to already be around,
and they were testing out different types of methods for weighting silk. With these new types,
it was successful enough that they found that they could easily weight a silk up to 100 to
300 percent of its actual weight, meaning that far more of your textile was weighting than actual
silk. It also meant that many of these compounds were incredibly flammable, and had all of the
proper elements needed in order to spontaneously combust. More and more silks were weighted more
and more heavily, and the issues of quality of silk, and breakage of the silk, and issues of
flammability continued to rise throughout the century. And it wasn't just silks, cottons were
also weighted, and there started to be more and more concern publicly about trying to differentiate
the quality of silk, because as silks became weighted, and felt heavier, and felt more
luxurious, it was really hard to tell what was actually a luxurious expensive silk, and what was
just being sold as one, because it wasn't always the price that could tell the difference. Different
magazines came up with different ways to test out your textiles to see if they were adulterated.
Depending on the type of metal that was used, this meant different types of tests. Some went so far
as to explain to you how to make sulfurated hydrogen gas to test out your textiles, while
others were far more simple, saying that if you press creases into it, and it cracks, if you run
your fingernail along it, and it changes the texture, and makes it shiny when you abrade it, or if the
threads start to separate out as you rub your fingernail along it, and break them up, that those
are all evidence very easily of it being a heavily weighted silk. Now, this is the point where we
start to see a lot more mentions of the silk breaking, and this is based around the issue of
having tiny metal particles embedded all over your textile. Metal is sharp, so gradually they can wear
and abrade and break down, and I always thought of this as something that was over hundreds of years,
or maybe even over decades, but no, they're talking about this being an issue immediately, where you
can test the textile before you have even purchased it to start to see breakage. So this is
something that was an immediate problem for these textiles, but the benefits of weighted silk far
outweighed the downsides as far as sellers, and even a good portion of the public, were concerned.
It meant that they had a silk that looked like they wanted it to, that felt like they wanted it
to, that had the right luster to it, because many of the dyeing processes that had to go through
things like logwood dye in order to make it dark enough, black enough, to actually not just be a
dull dark gray, meant that they needed to put extra processing into it, meaning that they wanted that
weight, they wanted that scroop, that noise, and that luster, and that was hard or even sometimes
impossible to achieve without the process of weighting. On top of that, it made it cheaper,
so of course plenty of people in the 19th century, as the middle class was coming into existence,
and we were dealing with the scale of the industrial revolution, and making things available
to more and more people, this meant that silk was available to more and more people, so more and more
people were purchasing it, and it was available in cheaper and cheaper ways, even if the quality was
pretty awful in some of those cases. So it was starting to appear in more wardrobes than it ever
had before, so it was very useful in many ways to have heavily weighted silk to not only these
sellers, but to the buyers as well, which of course meant that the demand was going up, and the issues
of the quality of the silk were getting to be more and more of a problem. By the end of the 1870s,
there started to be concerns over the flammability and spontaneous combustion of weighted silks in
transport. Many of the most weighted silks were coming from Europe, and steamships were very
concerned about this. In fact, some started to say that they would not carry heavily weighted silks,
and this was a valid concern. In 1879, the steamship Mosul caught fire on October 3rd,
and after fighting the blaze for five hours, they managed to limp themselves into port,
and generally save the ship. It didn't sink, and they were able therefore to do some investigation
as to what caused the fire, and they found that the hold had been full of black silks,
and that seems to have been where the fire got started. And there were more and more concerns
about this issue. One of the only stories that I could find that talked about spontaneous combustion
of silk on a smaller level was that of a bride and groom traveling on a train. They had packed
the wedding gown and the suit in a trunk together and had loaded it onto the train, and at one of
the stops noticed that there was smoke pouring out of the hold. They looked into it and found
that the woman's wedding dress had spontaneously combusted, had ruined the suit, and ruined,
of course, the dress as well. So there were definitely cases mentioned of this happening
on a smaller scale. However, the likelihood of it actually happening to an individual gown
is fairly minimal. The things that really made it set off in larger scale warehouses and
transportation was the change in humidity and oxygen levels, was the heat level, and the fact
it was all compacted and closed in tightly with each other. It required a large quantity of this
silk and required the silk itself to be fairly heavily weighted for this to be a potential issue.
This, of course, did not stop people from being concerned about it. And if there's one thing you
learn about the 19th century from this video, I want you to take away the fact that they liked to
write about horrible things happening and being so afraid and everything's gonna go wrong. They
wrote that all the time to the point where pretty much everyone ignored when they did that because
it was just constant. So they loved very verbose articles on the dangers of the world around you,
and I found one that is no exception to this, and I need to read it to you word for word
for that reason. This article from 1880 starts off discussing the warehouse fires that were
taking place and extrapolates it onto potential everyday women. It will be a dreadful thing if
these fires begin to break out on our sidewalks, at the opera, in the ballroom, or at the church.
The old dangers of too close proximity to the gorgeous half of the human family are great
enough, but if women are liable to burst into flame at a moment's warning, a total separation
of the sexes would become the unavoidable condition of fashionable society. Any properly
constituted woman would naturally prefer the risk of conflagration and even sequestration from
mankind rather than surrender her beloved French silk. It's fairly poetic, but it does express the
concern and the imagery of women just suddenly bursting into flames at any given time. Now I
didn't come across any actual stories of this happening or any examples where it supposedly
happened, but it is certainly a really interesting image, and it also makes you wonder about this poor
person who's walking around life looking at all of these women with concern that they might
suddenly burst into flames at any given time. Just a terribly horrible way to live. But despite these
concerns, weighted silk continued to be sold. There were certainly claims that if it wasn't weighted
too much, it wouldn't be flammable, and there were even some claims that if it was weighted
too much, so much, it would actually stop being flammable and would become fireproof. And there
was a lot of humor written about that as well, the fact that no, women could actually go about and
fireproof clothing at any given time and be better off for it. So there were definitely questions
about the safety of these garments and the safety of this type of silk, but they didn't know exactly
what caused it to be flammable, they didn't know exactly what caused it to have all the damage
and issues and fall apart, they were still trying to figure that out. And they were constantly
amending the process of how they went about weighting silk. One of the major additions was
in the 1890s when they started adding a silica-based bath to the process, which helped with
luster and finishing and changed up some of the technical aspects of the silk. We now know,
looking back from a modern museum perspective, that some of those earlier silks are going to be
more susceptible to sunlight and that the silica-based silks, what they actually called
dynamited silks, I'm not making this up, those are more susceptible to humidity changes and
dryness. So there is actually more than one type of weighted silk, there's quite a few,
but those are the two major types that you regularly still find today in terms of antique
garments that are no longer in good condition. Of course, the demand for weighted cheap silks
continued. At some points they claimed you really could not find a silk that wasn't weighted, and
most were weighted very heavily. One of the bigger issues with this is the lifespan of the silk was
greatly reduced. Whereas a good silk gown could last a year with a fair amount of wear, it could
last up to three months easily with constant wear almost every day before it started to really look
ratty or worn down, this sort of weighted silk never made it three months. It fell apart by the
time you reached the three-month point, and if it got sent off to the cleaners, it had almost no hope
of coming back. So lots of times the garments that were purchased, they had to be cheap because they
just weren't going to last. Exposure to the sun, to water, and especially to body sweat meant that
these things were going to break down very fast in very fragile areas. As of the early part of the
20th century, I started finding constant references to pure dye silk instead of necessarily requiring
heavily weighted silks to put markers in there as to what they were weighted with or how heavily
they were weighted. Silk companies decided in turn to start advertising the silks that weren't
heavily weighted, those that were very lightly weighted or barely at all, and they just simply
called them pure silks. And you start seeing regular advertisements for garments being sold
this way, regular advertisements for textiles being sold this way, but it does require a different
dyeing process which is fairly complex in order to get black. Silk itself is fairly translucent,
and the aniline black dyes they were using really just produced a dark gray. So they were still
going back and using logwood, they were still using some acid baths and other chemical processes
in order to get things to stay and be colorful. More and more the argument became a matter of
how much things were weighted rather than being weighted or not weighted. Things that were
moderately weighted or barely weighted at all became the ideal, became something that was heavily
advertised and argued for. Pure dye had the issues of not being able to achieve all of the very bright
vibrant colors or even the really dark rich vibrant blacks that were greatly desired. So there were
definitely arguments against entirely pure dyed silks, and instead many looked for something in
the middle, something that was a reasonable quantity. And many scientific experiments were done to try
and understand what the ideal amount was, at what point did it tip over into damaging the silk. And it
seems like people should have been really aware of this. If silk is going to fall apart quickly
after purchasing, it's heavily weighted, you would think the public would want to know, and you would
think all of these articles that I found would have informed them of such. But many many articles
mentioned that no one seems to know about this, it's a big secret, no one really knows that, and
even if they do find out, they generally don't care. By the time we reach the 19-teens, the claim
is that people don't care, because the garments aren't meant to last a long time. They want to buy
a cheap dress, wear it for a season or two, and then they don't care what happens to it. The textile
quantity that goes into these gowns is so much less, and so much more cut up than it was in
decades previously, so these garments can't be reused and remade in the same way. And fashion
is changing too quickly to get multiple years of use out of that garment. So a season or two, and
it's going to be basically thrown away anyway, so why spend more money on something than you have to?
Why not just buy the cheap one that's going to fall apart, and then have the money to buy another
one right after? Keep up with the fashion. And if this sounds exactly like fast fashion to you,
it pretty much is what this is. It's just crazy to me that this started this early, I honestly
didn't realize that. But there were issues with some of the newer textile styles that were coming
into fashion, such as Georgette. Georgette is a lightweight sheer crepe textile, and it won't
hold up to a lot of weighting. Things like chiffons will not hold up to a lot of weighting, so this
became an issue as more and more lightweight textiles were coming into fashion, and weighting
them was not going to be an option in the same way. Additionally, in the 1920s, popularity of what
they termed washable silk really took off. And this is something that is documented by numerous
different department stores and dress sellers around the US, that washable silk was the thing
in the 1920s. It was starting to replace washable cottons for day dresses for the average woman,
and women wanted their silks to be wearable and washable. They wanted them to be functional in
different ways. And weighted silk wasn't washable in the same way. It couldn't hold up to that
because of the chemicals that were in it were very often going to come out when it was heavily
laundered, when it had soap added, and would just fall apart in some cases. So with the addition and
the demand of washable silk, with the desire for lighter weight silks, weighted silk became something
that people were aware of. They realized it was a problem. It was being sold specifically as
weighted silk now because it had to be. Otherwise people would purchase it expecting qualities from
it that it couldn't hold up to. So it was starting to become a problem for the people selling these
garments. And that's when the Silk Association of America stepped in. In 1928, they set up a range
of standards for what maximum amount of weighting silk should have, depending on its type. They
couldn't hold anyone to this. People could just essentially put their word down saying, I will hold
myself to the standard, I will hold my company to this standard, and claim that they were doing. So
there was no way to regulate this. But these were a good place to start because the standards were
based on scientific measurements and experiments that were done on different types of silk. So they
had black satin at no more than 55%, regular satin 50%, crepes could be 45%, georgettes only 30%.
Printed silks also came in at 30% because the printing process, which was done after the fabric
was completed, required no more than 40%. Once you hit 40, it was too hard to print on the textile,
so they set that at 30. And then chiffons could only be 10% before they started to have issues.
Previous to this, they had recommended an overall no more than 40%, but obviously certain textiles
couldn't hold up to that. They were finding that most companies didn't follow that exactly, and so
they wanted to come up with a more specific list. But like I said, once it was created,
it required an honor system, and that was kind of hard for the customer to deal with.
So the first response to this, aside from the actual silk manufacturers, were different department
stores like RH Macy, who decided to refuse any silks, any silk garments, any silk accessories,
anything that was over those standards. So they sent back garments, and they refused to take ones
from there on out. And that created a major issue for the people that were producing silks at much
higher rates of weighting. The public became more and more aware of this as these articles were
being printed, as their department stores were talking about the different types of silks openly,
saying, we don't have this, but we do have this for these reasons, and gradually became an issue
that was large enough that the government decided to step in. They realized that the prices were no
longer in tune with the actual quality of the garments. They were all over the place, and this
was something that they wanted to prevent from happening. So the Federal Trade Commission decided
that once things reached a certain point, they set their own table of standards based closely
off of that earlier one, that anything above that standard would simply have to be printed with
weighted silk. They did this rather than an outright ban on all weighted silks over a certain
point, because the main point of this was to inform the customer what they were purchasing.
It wasn't to put an entire ban across the whole thing and make it so no one could produce silks
that way. I even found one article that claimed if that were to happen, that there would be silk
speakeasies, which I don't know about you, but I kind of want to see what one of those look like.
I know it'd be a whole bunch of weighted silk and therefore wouldn't be good quality stuff,
and I probably wouldn't want to actually buy from it, but the idea of a silk speakeasy just
sounds really cool. But that's the concern that there was. So they just put regulations into
place saying if it is over this point, it just has to be tagged with weighted. And so you'll
start seeing advertisements specify pure silk or weighted silk and actually start to define the
amount of weighting that is done to the silks that they're selling. A similar thing happened
the same year in 1930 with the International Silk Federation in Europe, and they too laid out
standards of what production should be for silks. They did not have the same government-based backup
because it was many different countries in order to put down actual regulations, but what they
requested and said was that anyone who was following their standards should print controlled
treatment in the origin language on the tag of the garment so that way they would know that
supposedly this company is following the standards of this international federation. So they went a
slightly different route with it, but pretty similar concept. And in reality, it only made
so much of a difference because things are starting to change pretty rapidly in terms of
the world of fashion and the world of silk. In addition to the education that the public was
getting by seeing these things on tags and advertisements and being talked about in the
shops, the actual clothing that was desired was changing. The silks that people wanted were
lightweight and flowy, they weren't crisp, they didn't have the rustle to them in the same way,
so the weighting of silk and the desirable qualities from it started to drop off. There was
no reason to weight silk when you didn't want those attributes in the same way. Additionally,
artificial silks were coming out of every single place. Rayon had taken off greatly by the time we
got out of World War I and was growing in popularity throughout the 1930s and 40s.
So there were lots of elements that meant that weighted silk had too much competition
and wasn't what people were looking for. If you add in then the fact that the dyeing processes
of silk were changing and no longer needed the same mordants, they no longer needed the same
chemicals that were used in weighting, it meant that it wasn't really logical to continue to use
old systems and old chemicals. There were new dyes that did better things, were more colorfast,
more washable, better with the sun, and didn't have the same reactivity or flammability that
the old versions did. So there was no reason to not keep up with the fashions, keep up with the
technology, and weighted silk just kind of disappeared. I still see a few advertisements
that mention weighted silk throughout World War II, but once we reach the late 1940s,
I found it really hard to find any mentions of weighted silk. It just sort of disappeared. And
in reality, the laws that were put in place in 1930 to regulate weighted silk are still around.
They still reprint those from time to time, so they're still there. And if someone is selling a
heavily weighted silk for some reason, it would need to be mentioned on the tag, technically.
So weighted silk sort of died out regardless of the regulation on it. The regulation itself
probably isn't what killed it. It's probably the fact that it just wasn't what we were looking for
in silk anymore, and there were too many other options. There were better options if you wanted
inexpensive textiles. There were better options if you wanted washable textiles. And there just wasn't
a point in it anymore. We could dye a good dark rich black without having to deal with log wood,
without having to deal with iron salts. So it just kind of disappeared. But we are left with a whole
bunch of beautiful antique clothes which are not going to survive terribly well. There is absolutely
nothing that we can do once it starts to shatter and fall apart. The most you really can do is just
handle it as carefully as possible, as little as possible. Make sure that it has a good
solid humidity state. Not too humid, not too dry, that it's not dealing with massive temperature
changes. Don't pack it in with a bunch of other silks apparently, because you might just, I don't
know, spontaneously combust that box of antiques. Which is still just a crazy thought to me. But there's
really nothing we can do to salvage it in terms of our current technology. Maybe far enough in the
future we will have ways of actually solving the shattering issue, but for right now there is
nothing that we can do. There's lots of tasks that have been done, lots of different things that have
been tried. We can't salvage it. Nor could they in that time period. They just usually threw those
clothes away. And that is part of the reason why most often you will see that the lining is lost in
a garment, because that's where the cheapest silk made the most sense. And that's where it's most
likely to get a little bit of wear and tear and just disappear entirely. So hopefully now you have
a better idea of what exactly goes into weighted silks and the process and the history behind them.
And hopefully, like me, you got really excited about and really concerned about the flammability
and spontaneous combustion of these silks and then realized, no, it's okay. We're safe. We don't have
to worry about it. But the mental image is still there. So it's fine. So I am quite pleased to have
a much better understanding now of what went into these weighted silks, why you found them everywhere,
why people continue to buy them, even if they were poor quality, and why I hopefully at least
shouldn't be concerned that any of my antique garments are going to burst into flames anytime soon.