Sharp AND Durable Knives with the Ultimate Convex Kit by Wicked Edge

Grim Granite
106 followers
#ad #sponsored #wickededgeambassador
Check out the Wicked Edge Ultimate Convex Kit: https://tag.gs/UYZc0
Save 10% using this code: 10GRIMG24
In this video Gordon demonstrates how to use the Ultimate Convex Kit by Wicked Edge to put a convex edge on a knife. Convex edges provide durable and very sharp working edges for hunting and bushcraft. Wicked Edge makes it easy to create a perfect convex edge on hunting and bushcraft knives in very little time.
@WickedEdgePrecisionSharpeners
The problem is, if you make your bushcraft or hunting knives really sharp, the edge can
actually be quite brittle, and that razor edge you made won't last long.
If you want a blade to be really sharp and durable, then you'll need to make the bevel
convex.
This is what your knife edge looks like after you sharpen it, a V-grind.
And this is what you're trying to achieve with a convex bevel.
Look at all that beefy goodness there.
That's going to help keep the edge well supported and sharp.
Wicked Edge has created the ultimate convex edge kit, and it takes all the guesswork out
of making your edges sharp and durable.
It comes with three sets of platens, which are basically handles that have rubber inserts
in them that you can mount lapping film to.
And it also comes with 30 micron lapping film, 15, 9, 6, 3, and 1 micron lapping films.
So you can get a working edge that is really durable using just the 30 and the 15 micron
lapping films.
And if you want to get a really high polish, then you just keep going up in grits until
you get to that 1 micron lapping film, and that's going to give you a really high polish
on the edge of your knife and make it very durable.
The kit also comes with a jeweler's loop, so you can actually look at the edge of your
knife blade, and that's going to be very important as you work your way through the grits to
make sure that you're not cross-contaminating and scratching the edge of your blade bevel.
The first step is sharpening the knife on a Wicked Edge system.
Any of their systems will work, actually.
Today I'm using the WE-64 Cobalt.
The reason why you want to first sharpen the knife on the Wicked Edge system and not proceed
right to the convex kit, you need to make sure that all the inconsistencies from manufacturing
are straightened out before making the edge convex.
It's really simple to set these things up.
All you've got to do is peel off one of the 30 micron lapping films and apply it to the
coarse side of the handles.
This is just so that it keeps it all organized for you, you don't get lost and put the wrong
grit on the wrong side.
So I put the 30 micron lapping films, stick that right to the coarse side of the handles.
Just like that.
Bingo.
And before you begin, you want to make sure you have some rubbing alcohol and some paper
towel so that you can clean off the blade as you go.
I like to start off by cleaning the blade, just very carefully up and away on the bevel
just to make sure I'm not introducing any really rough grits into these lapping films
because that's just going to rub that grit right into the blade, cause it to scratch
up a lot.
And then you just put those on the guide rods and you're ready to begin.
Now, you don't want to use these like you would a normal diamond stone where it's down
and away.
You want to go just up with it, otherwise you're going to end up destroying the film
and the rubber blocks instantly.
So you want to apply a good amount of pressure and go up with the handles.
Now since this is essentially removing material to create a new bevel shape, you'll need to
set the angle on each side to one degree more than you were using with the diamond stones.
So when you're done with this stropping process, your blade bevel will be about two degrees
more than when you use the diamond stones.
Just something to keep in mind in case you're trying to get to a certain bevel angle for
some reason.
So I'm going to go ahead and adjust this to be one degree more on each side and now we
can begin.
This is going to take more pressure than you would use with the diamond stones because
you're actually trying to wrap that lapping film just slightly over that flat bevel on
the blade to kind of round it over and create that convex profile.
So it's going to take a little bit more pressure and it helps to hold the handles up here at
the top too.
It definitely takes a little bit of getting used to when you're transitioning from diamond
stones to this process.
It's a different feel on the handles.
When you're working around the tip of the blade, you want to make sure that you're going
upwards but also just slightly away because you don't want to have the tip of the blade
snag the handles and ruin the film.
So now that you've done about 20 passes, we're going to turn on the loop and you want to
set it right against the side of the knife and kind of rotate it a little bit until you
can see what the edge profile looks like.
What you'll notice is that the very edge has a bit of a shine to it and the shoulder, which
is just where the bevel begins, you'll see that those two areas have a little bit of
shininess to them.
That means that the convex kit is working.
It's slowly starting to round over that flat bevel.
Okay, so I've done another 20 passes and the very center is now nice and smooth.
So there is a nice convex shape to this blade bevel right now, which is really cool.
Now I can move on to the 15 grip.
But before I do, I want to make sure I clean the blade and these platens really well.
The reason why we want to clean these platens off is that they start to get buildup on them
from the metal filings that are coming off of the knife.
So you want to clean this up.
You see there's a lot of black material already on there.
This is going to allow the films to cut more efficiently.
So if you notice that this process is taking longer than it probably should, then all you
got to do is just get some of this alcohol on a paper towel and wipe these platens down.
So now that we're all clean, we can move on to the 15 micron lapping film.
So here goes the 15s.
I'm putting these on the fine side, the white side of these platens.
It's cool that in the kit they give you an extra two sets of handles so you can get all
of the grits laid out on these platens if you want to take it all the way up to a really
high mirror finish.
And we put them on the guide rods and we are ready to go with these.
Here's the 15 micron lapping films.
Again we're keeping our angle at plus one degree from what we sharpened the knife with
the diamond stones.
I'm going to do 20 passes with the 15 grit lapping films.
Already getting a lot shinier with the 15.
So if you've classically been sort of unhappy with how long your knife edges last when you're
doing bushcrafting or hunting tasks, then this is something you should definitely look
into because a convex edge is going to give you more meat in that blade profile and it
will better support the edge and keep it sharp for longer.
Again, I'm going to check it with my loop to make sure that the scratches in the very
middle of the bevel are removed from the previous grit.
I have a little bit more work to do, probably another 10 to 20 passes, and then we'll check
it again.
Oh yeah, this looks so good.
This doesn't take any time at all to make a very, very high polished, super accurate
edge on your blade.
So at this point, having done the 30 and the 15 microns, I could stop here and call this
a good working edge for bushcraft and hunting.
If I wanted to make this a really high polished knife, I would just proceed with the other
grits that are in this pack, which is the nine, the six, the three, and the one micron.
Just 10 to 20 passes with each of those on the extra handles and the thing will be gleaming.
It's really that simple.
The blade now has a convex bevel, which will hold up much longer with heavy cutting tasks
and you'll be able to touch it up faster on your wicked edge system.
Be sure to check out the link in the description.
Use this discount code for a discount at checkout.
I hope you found that useful or at least entertaining.
We'll see you later.
