Engagement of the shot & Aiming - Compound Shooting Form Part 6

LEARN ARCHERY
7 followers
3 Video Views·Dec 3, 2025
So I guess the next logical step to demonstrate to you guys is actually going to be with the
release aid and how we actually are going to execute the shot using the methods which we've
talked about earlier on. Sort of the engagement of the shot because in theory you know we've got
the scapula loaded we've got the front arm strong yet dynamic but we've still got to engage we've
still got to approach the release aid to make the shot fire. Definitely and I think it's important
to note at this point that when we're making the shot fire this is certainly not a conscious
decision on our part. I mean I'm going to talk through the trigger release operation to begin
with and for me I'm going to pull back and I'm going to load up that scapula and as I do that
I like to lay my thumb just onto the barrel of the trigger and feel the weight of the trigger
underneath my thumb and then I start to move that scapula back gently in doing that it sets
the release aid off and executes the shot. So pretty much the last conscious thing you do is
the act of consciously laying your thumb on there and aware of where your thumb on there and about
how much tension you have in the release hand. Yeah it's very important for me to keep my my
thumb relaxed and make sure as I say just absorbs the trigger. It's very important you don't mentally
decide to make the decision to set this off at any point. It must be that scapula motion which
just tightens up the release in your hand setting the trigger off and that's how I execute the shot
with the thumb button release. I've always looked at it with the thumb release as I have three
separate components. I have the bow, I have the release aid and I have the human body and when I
take that release aid and clip it onto the bow the release aid now in theory really is part of the
bow and I'm trying to load or to pull my body against the bow to make it fire. I think it'd
a good opportunity now if I grab my bow and I'll make some shots and maybe you can just talk them
through exactly what's going on with the shot. Some other things to take note of as Liam draws
he drops down low to engage the scapula maintaining strength in the front arm towards the target
adding a little bit of strength as needed during the shot. Liam then begins to engage the release
aid with his thumb. This is the last conscious effort Liam has in the shot. The rest of it now
is carried out automatically and the subconscious will continue to load the scapula until the shot
fires. Having now thoroughly covered how we activate or engage the thumb style trigger release
aid we're now going to take some time to discuss the activation of the hinge style release aid.
Now an important thing to note here is that the actual execution of the shot is going to use that
exact same scapula motion that we've talked about right the way through this. However you're going
to see that the engagement of this is actually a little bit different. We're going to see Dave's
fingers rotate back more a little bit more movement than what we had in the thumb button
style right? That's correct that engagement that movement has to be there because this release
aid is a hinge release aid and there in the premises of it it has to actually hinge before
it'll fire. So I do have to actually consciously begin the hinging, begin the movement, the
engagement to make that fire. One thing to note with this hinge style release is that you haven't
actually got to make that conscious decision to lay the thumb onto the trigger like we had with
the thumb button release and for some people at home you might find that actually easier to get
this execution that we're talking about right? Yeah I think a lot of people get apprehensive
about the relationship between the thumb and the engagement of the trigger and some people get a
little too heavy on it some people also get tentative of it and afraid of it and will start
to freeze up or or stop the shot. That's why like Liam mentioned for a lot of people especially in
the experimental and learning stages of this form a hinge style release aid or a resistance style
release aid may be better suited for them because they don't actually have to think about
setting their thumb on the actual item that executes or activates the release aid they can
just draw back load up the back make sure the front is good and strong and begin that hinging
movement to make the release aid fire. Okay so let's take this down the range now Dave and have a look
at the engagement and execution of the shot with the hinge style release let's do it.
Okay so an important thing to note here as Dave gets ready to pull the bow back
we're going to notice that his vertical body position, upper body position, grip and release
hand grip are exactly completely identical to what we've talked about even though this is a
different style of release. So as Dave pulls back now we can see that he engages his scapula in
exactly the same way loads up but in order to consciously start to make the shot process we
can see his release fingers actually twist back on the release aid in order to execute.
So now that we've got our shooting form dialed in it's important to talk about the next step
and this is aiming. Now I'm going to figure this is the section with the most myths and strange and
all sorts of crazy ideas about it. We're here to blow the lid clean off that and dispel all
of rumors and show you exactly what it is that me and Dave do to keep our dots steady in the center.
Yeah what we're going to do in this segment is we're going to go where most of our professional
colleagues in the archery world won't want us to go but we're going to go there and share it with
you. We're going to really define aiming and I guess the best place to start with that is that
everyone watch and ask themselves what aiming is and nine times out of ten what is it they come up
with? I mean from the experience I've had everybody seems to think aiming is quite simply putting your
dot in the center of the target and holding it there as still as possible. That's not our
take on it right? Yeah and a lot of people seem to put the emphasis on hold and aim way in the list
of priorities long before the actual shot or the execution. Most definitely and I think the way
that we both look at aiming is aiming is quite it's quite simply looking. I mean if you can
imagine I've got a dot on the wall up here and if I want to aim my finger at that dot I simply stare
at it and I can bring my finger to it and that's perfectly easy for me to do. However with aiming a
bow most people would not do that. They'd simply go up a bit, across a bit, down a bit, right a bit,
left a bit and that makes makes it like very difficult. So we're trying to get across the fact
in this chapter that aiming is quite simply looking. Yeah that's all it is. Aiming is looking,
it's your eye aligning objects, your eye sending messages to your brain which then relays messages
to parts of your body to correct what it sees out there based upon a pre-formulated picture that
you've put together in your head before you start the process. But the biggest thing about aiming is
people tend to let it govern and control everything they do with their shot and it's simply that
simply has to stop for you to excel to an elite level. Aiming most definitely needs to be a
subconscious process, not something that's consciously in the forefront of your mind.
You need to learn how to do it and let your brain take over and do it for you. Other important
factors to consider when aiming is scope size, field of view, peep size, dot size and the amount
of magnification you have. Yeah all these factors are going to attribute to the way that
the way the target actually appears to you when you're trying to aim and begin this subconscious
aiming. You know for me personally it's been very much a trial and error process and just you know
looking and seeing what other people use in order to get the picture which I need best you know to
recreate what aims best for me. And I use actually a relatively small size peep but then I like to
keep the scope as far away really from the bow as possible that my extension bar will allow. I'm
actually using a 0.7 diopter lens at the moment which I think creates around a seven times
magnification. For me I'm actually I prefer a little bit bigger peep actually because the peep
size and scope size have to kind of match up together and that's one of the key fundamentals
of alignment in aiming. And I mentioned it before but I want to reiterate it here is that your scope
housing is able to be seen incomplete so that your scope and peep line up together like two circles.
I think that's definitely essential with the beginning of it. So my peep tends to be perhaps
a little bit larger than yours but I am shooting a scope that's a little bit bigger housing and
Yeah I find I can when I look through my peep sight I can literally just see the rim of the
scope. Like a halo around it. That also gives me the most clarity in my lens because I do like
quite a clear picture to aim with. Yeah I find if I go really small I get the clarity but I lose the
light and I think in a lot of places having that light is more important than the clarity for sure.
In terms of dot size also I mean basically the bigger your dot is the less it will appear to
move am I right? Well yeah that's true but however the more target it covers and a lot of people do
have problems with you know they see the target they put their spot on the target it covers more
than they're comfortable with seeing so they end up playing kind of a peekaboo game and checking
and see if it's still there. So I think dot size is definitely something that's very personal
preference but we've got a method in which we look at the target that might be a little bit
different than everybody else's. Yeah and one thing I would say is if you go for a dot size
which is too big for you and it actually obscures too much of the target it's a common problem that
if you need to aim off for windy conditions or any other adverse conditions the big dot is very
imprecise and inaccurate. It can be when you're trying to aim off in windy conditions at long
you know too big a dot can cover too much of a color band and can be definitely a little difficult
but I think if you can get your dot size down so that you're looking at the target a little bit
differently I think than anybody else does a lot of people say you want your dot to you know to be
as small and as precise as possible but the smaller you get the dot what happens? Well the more it
moves and makes your life more difficult but the way that we aim with this subconscious aim for me
I like a relatively small dot but not for outdoor archery but but not too small whereas indoors I
feel that without the adverse weather conditions and you know it's my dot tends to hold a little
stiller indoors I like to go for the bigger one and this gives me the appearance of it holding
very still which when you've got to make that super x in the center of the target it can be
very difficult. Yeah tell me about it I kind of in my sight picture indoors 18 meters what I'm
looking to do is to have just a halo of yellow all the way around my dot now myself I shoot a
black dot you might like orange green red however color is irrelevant something that's appealing and
pleasing to your eye but I think if you can turn things on the flip side a little bit and look at
them differently and start to look at what's around your dot rather than what's behind your
dot I think you'll start holding steadier almost immediately. I guess the other option which we've
actually got to dots in our scope lens is the ring the opportunity maybe to have a you know a
circle around with them a hollow center so you can actually see exactly what it is that you're
you're aiming at. For me personally I'm not really a big fan of the the rings I find that a lot of
the time when the target faces get torn up it tends to almost drag the ring off to one side
into the hole that's being created and also I think I like to have the object which I'm
shooting at actually covered in the halo effect which you described earlier Dave is exactly what
I look for in my sight and for me that makes a much more comfortable aiming picture. I found for
me in my own personal experience and professional experience the circle or hoop as you want to call
it causes more problems for me than it fixes as Liam mentioned the holes in the target the target
gets shot out in an area that's not in the center the way that your eye likes to align
objects your eye is going to be drawn to that it's going to send messages to your brain into your
body it's going to move the bow and center that shot out or that shadowy spot in your circle in
your hoop and another thing to consider too with the circle that's very difficult in my opinion
is aiming off in windy conditions and once again at long distance you know if your circle may be
correct for one distance you know say at 30 50 meters you go out at 70 and 90 that thing could
be you know it could almost be as big as the bail and then the adverse is true if you get it small
enough so it works good at the long distance for you it could be entirely too big at the short ones
or too small. Definitely and I don't know Dave have you ever seen those guys that are in the
middle of the feet are at the change of distance they're pulling the extension bar in and out
well that's yeah in and out of they got a whole pocket full of lenses and peeps and apertures
and I think you know simplicity. Exactly. That's something I don't want to go through as a
professional and you shouldn't have to go through it as an amateur recreational archer is having to
have all this extra gear having to make all these changes for all these different distances
it's just simply not needed. It's really and this reiterates it's really important to have a very
simple sight picture with the halo which is what we mean you both look for you know in the shot.
I think simplicity rings throughout our our philosophy our form our setup our equipment
selection and and the maintenance of it we I really like to preach simplicity keep things
as basic as possible so that when something does go wrong you could recognize it and fix it really
fast before it causes you too much damage. Hopefully we've dispelled a lot of the myths
about aiming but most importantly when aiming you've got to have a sight on your bow which
you can depend on that's why myself and Dave both choose the Sherlock Supreme. Across the
Sherlock line of products they've got something for everyone regardless of your ability level
whether you're a bow hunter, weekend archer, recreational archer, junior archer or top-level
professionals like Liam and I. This particular model which we choose is the Supreme and it's
I'd say it's the quintessential sight for the compound archer it's got both first second and
third axis adjustment it's also got very fine up and down movement and left and right movement.
Yeah Sherlock was actually a pioneer in the third level of axis adjustments for their time I was
actually took a very big part in helping Steve Gibbs when he was developing a third axis leveling
technology for the Sherlock brand over 10 years ago. I believe third axis adjustment is is now
essential to the modern day compound archer. Myself and Dave are both multi-functional you
know in the types of archery that we do both indoors, outdoors and field. For field archery
especially if you don't have that third axis adjustment absolutely perfectly the chances of
hitting the same target at a degree of 45 degrees up and an angle of 45 degrees down is going to be
almost impossible. Yeah whenever I do seminars or clinics or anytime I actually break out my
Sherlock third axis leveling tool it pretty much puts on a full-on leveling seminar. People see
you adjusting yours they want to have theirs looked at and it just leads to one after the other and
you'd be surprised the number of people out there shooting field archery and 3d archery events that
their sights are not completely level on all three axis's and that's cost and inaccuracy.
That's just another great example of why Sherlock is such a you know a great brand to represent
because accessories and components such as the third axis leveling device the massive variety
of colors the different shapes and sizes available is really great for us as shooters. And first and
foremost too above that is durability. Durability and precision quite simply as professionals our
entire livelihood depends on this sight being reliable and not moving from where we set it.
Most definitely the versatility the durability and the reliability is very
important when you're choosing a sight and that's why we choose Sherlock.
