Bow & Release Hand Grip - Compound Shooting Form Part 2

LEARN ARCHERY
7 followers
5 Video Views·Nov 30, 2025
In this chapter we're going to discuss bow hand grip. Now if we take Dave's hand as an example
here, the way I like to look at this is I split the hand up into two halves using the lifeline
which runs down here. This side is the thumb side and this side we're going to call the heel side.
Now it's really important that only the thumb side makes contact with the grip and the heel
side doesn't. Basically speaking these two sections are different muscle groups. If we're
going to have two muscle groups acting on the grip it's going to cause uneven pressures in the grip
which are going to create torque issues later. So it's really important as I say to make sure
that only the muscle groups in the thumb side are making contact. So now if Dave relaxes his hand
like this, you can see that that's a nice relaxed hand and that's basically what we're
looking for throughout the shot to keep the hand relaxed and just have it as an extension of our
arm. If Dave now turns that over and puts it in the 45 degree position so the knuckles are
actually running down at 45 degrees and that is exactly how we're going to put it into the bow.
So now we've described the parts of the hand it's time to show you how to put it into the bow.
If Dave takes that nice relaxed hand that we talked about before and puts it into the bow
using a low wrist action he's then going to put even pressure down the grip. This means that again
Dave is actually going to rely on his skeletal system of his hand and his wrist to rely upon
instead of muscle and this refers back to how we talked about it before that skeletal system is
much stronger than the muscle system. This is quite simply an extension of his upper body position
that we talked about before. So now if we take a look at how Dave's got this hand in the grip,
he's actually got his thumb and first finger looped around the front of the grip and they're
sitting there nicely relaxed. They're also protected by the finger sling which as Dave's
hand is relaxed this will catch the bow once he's shot it. You'll also notice that these three
fingers here on Dave's bow are tucked in behind. Now this acts as a guard for the grip because we
know that if these sections of the fingers are touching the grip at any point then the grip is
incorrect. We can actually see in here that Dave's lifeline is running to this side of the grip
therefore that is correct because only the thumb side is touching. Another element to consider when
we're discussing grip is actually that the forearm doesn't get in the path of the string. Now we can
see here when Dave draws up when he draws correctly and his knuckles are at 45 degrees and the correct
side of the hand is into the grip you can actually see that his forearm is well out of the path of
the string. However we can see that when Dave's grip is incorrect and he has both sides of his
hand on the grip that the forearm is then in the path of the string. This is going to cause you to
hit your arm and it could affect arrow flight and it's also going to affect the tune of the bow
massively so it's not a good idea. Now that we've kind of touched on how we want to put our hand in
the grip Liam I'd like to talk to everybody a little bit about grip construction and so forth.
For us the narrower grip works the best really because the narrower surfaces the less prone to
torque it is. The closer to the pivot point which is the center of the grip you can put your hand.
Now I've seen a lot of things out there on a lot of grips. I've seen skid tape or rubber athletic
tape and big wooden gummy grips. Anytime you add something to the surface of your grip that changes
the texture of it that adds more adhesion abilities the possibility for torque is even greater because
if you've got skid tape or some kind of other athletic tape on your grip you put your hand in
there slightly incorrect from one time to the next it's not going to have the ability to slide
or slip to the point of least resistance so it's going to grab that handle and it's going to torque
and twist it and when you get torque and twist in a bow grip it's not only going to affect your shot
but it's also going to affect your accuracy it's going to affect your tune in your arrow flight too.
A lot of problems in tuning when you are encountered from how a person holds the bow
but also what kind of grips on their bow. So I think the stickier it is and the wider it is
it's got to go grips got to be nice and narrow and and a smooth surface it's going to allow
torque to come out of it. In this next section what we're going to talk about is we're going to
get into release hand posturing and positioning how you should hold the release and what you should
do with your thumb when you climb into the release aid. Now with Liam acting as a model Liam's going
to walk us through proper release hand posturing and position how the release should sit in your
So firstly I like to take the hand and I believe that the release needs to sit across this second
pad here so I make them like that and simply fit the release in like this. Now when I do that it's
really important to keep a flat back of the hand so all the way from the elbow all the way across
to those knuckles there should be a perfect flat line and once again this is relying on skeletal
structure rather than muscle structure as we've spoken about earlier because it's much more
reliable we're not relying on any muscles we're relying on the skeleton to keep this solid. For
me when I think about release hand position when I put my hand in there I kind of to illustrate it
to some of the people watching the video I think about it a little bit back in my recurve days when
I used to shoot a recurve and I had my tab you know with its ledge and it was really important
to keep those fingers nice and straight and that wrist joint straight straight back to the elbow
so I almost think of it as I wrap my fingers around the bowstring I'm in my tab and I just
turn my hand over and I've got these two knuckles split and that's eventually where my anchor is
going to end up but that's another way that helps me kind of illustrate it in my mind how my hand
should go into the release aid. And finally when you're actually thinking about your thumb position
which is what we use to execute the release aid which is what we'll cover later myself and Dave
both like to literally just lay before the first pad and the knuckle there is exactly where the
trigger meets and that's where we just lay it on we keep a nice relaxed thumb and we absorb the
weight of the trigger in our thumb and then it's ready to execute the shot from there. And I think
one important thing to keep in mind with this is the deeper you go in your release aid the further
it's going to bring your thumb up on there and when you go deep in the release aid and you bring
your thumb up on there it puts a bend in this joint here and as we mentioned before when you
incorporate a bend in a joint you're not using your body's natural skeletal structure you have
muscles on either side of that bend you need to maintain specific tension on all the way through
that shot and from one shot to the next to have any measurable level of consistency. So I don't
like to go too deep and I don't like to be way out on the tips right across those middle pads
bring your thumb around set it in a nice natural position so you've got good full contact with the
trigger and that should yield you a really good release aid position to begin your execution with.
