Crest 8600 Series 52" Ceiling Fan in Antique Brass with Light | Kitchen Install

TV Electric Fan
2 followers
30 Video Views·Nov 29, 2025
A Crest 8600 Series ceiling fan in antique brass with the original factory l ight kit installed in the kitchen. This is closer to the one that was in my aunt&uncle's kitchen, but still not identical.
Here is a Crest 8600 series ceiling fan. This is one of at least three videos we're going to show
of this particular fan. The first one will be here in the kitchen so we can see how it operates
on an eight foot ceiling with the stock two or three inch rod. The second one will be shown in
the living room on the two foot rod. And then the third one will be a comparison between this 8600
and this 8600. There are quite a few differences, enough to the point where I think it might even
be a different OEM. Here's the box that it came to me in. I do believe this is the original box
and I also believe it was never used. It does look like the picture, sans the finish being
antique brass and not polished brass. Here are the two finishes that were available
and then on the side it shows that it also came with either cane or stencil blades
and antique brass or bright brass. Out of these two, the one on the right here
is more similar to the one that was in my aunt and uncle's kitchen. It's not identical.
The light kit is the same style, although it's a very generic style kit so that's not saying much,
but the shades were different on the one that my aunt and uncle had. I remember the chains being
very short like this and it was the same kind of five lights with a smaller globe in the center,
but the shades were very plain basic ribbed shades. These shades are much fancier than
the ones that were on my aunt and uncle's fan. These have kind of a pattern on the outside here.
It's not just circular. These are ribbed all the way around and they also have a beautiful
amber tint to them. These are some of the nicest light shades I've ever seen. They look beautiful
on or off and I was just thinking that those ridiculously inefficient GE, I think they were
called candle glow incandescent bulbs that I showed a couple weeks ago, those would probably
look amazing in here because those bulbs also have an amber tint to them. So I'll have to put those in
here and see what they look like and maybe you'll have to go back and buy another box of those even
though I said I wasn't going to buy any more because they're so inefficient. Now we don't know
if the shades that were on the fan in my aunt and uncle's house were original or not. It's very
possible they were replaced at some point. I think it's kind of unlikely because that house was
purchased in the 2000s. The fan was not out of style with a million air quotes around it in
relation to the rest of the kitchen. The rest of the kitchen was clearly from the same time period
as the fan. The cane blades were still on, you know, downward facing. I highly doubt that the
shades were replaced because they went out of style. I suppose one of them could have broken
and then, you know, maybe they couldn't find any more of these shades so they were all replaced
to make it uniform. I have no idea what the context was. Maybe they were replaced, maybe they
weren't. It's kind of become evident that there were quite a few variants of this fan. There were
Kenmore branded ones that had different blades but were generally the same thing.
There were ones that had a different motor pattern but were also generally the same thing.
I have seen white and brass versions of this exact fan but that's not pictured on the box.
So there's clearly quite a few of these out there. Maybe there was one that came later on in the 90s
with a different style light kit. This light kit is more of an 80s style to me but I think that
this sold in the 90s. We'll check to see if there's a day code on the informations tag in a minute.
So I'm still not convinced that this was the exact one that was in their kitchen.
I also don't remember that fan saying Crest on the switch housing. There was no brand name on
that fan anywhere. There was no brand name on any of the fans anywhere in that house. At the time
I was too young to think to look at the information tag on top of the motor to try to find out how it
was made that way. So I never even knew what the make and model of this fan was up until very
recently when I saw some pictures of it in the box and I said, oh it's a Crest 8600.
There's the Crest logo on the switch housing. The other thing that's different about this
one than the one at my uncle's house is that the cane has a pink backing to it
which I don't think I have ever seen before anywhere else. That's really quite unusual.
Here's the informations tag and it's facing inwards on the fan so I'm holding the camera
backwards and upside down so if it's a little shaky you're not in the picture quite right. I'm
struggling to align this up. But anyways it says, let me tilt this so I can read it a little bit,
it says 08615RB52-1 and it's dated January of 1992. 85 watt motor so it's fairly powerful and
it's made in Taiwan as well. These Taiwanese made ceiling fan motors are pretty decent
earlier on. I don't know if they had gotten cheap by the 90s, quite possibly.
A lot of things started to get cheap by the 90s. So this is actually more recent than I thought.
I really wouldn't have put this much past the 80s. Woodgrain was certainly still in fashion in the
early 90s but I feel like this even would have been a little bit dated looking in the 90s.
Particularly this shade, that kind of really really warm amber tone and stuff started to
fade away in the 90s. It still existed but this is like really extremely 80s to me.
I don't have a speed control hooked up to this yet because there wasn't really intended to be
a fan here quite yet. This is only light dimming controlled so the fan is just always live. So
we'll start with the light first just so we can see what that looks like. I have 7 watt
S11 or no that's just totally wrong. I have S14 11 watt bulbs in here and it's just such a really
nice cozy inviting soft amber glow. When you don't have a dimmer, which ironically we do in this case,
when you don't have a dimmer these bulbs are perfect in my opinion for ceiling fans because
it's just enough light to illuminate the fan but it's not to the point where you don't want
to look at the fan. It's not too bright. It's very comfortable in the eyes still.
I also like to use clear bulbs in the ceiling fans because it adds a nice bit of flair to
the finish especially polished brass. This finish has got a decent amount of shine to it as well so
it kind of is picking up. You can see the reflection of the filament in some spots.
I think that looks very nice. You might be able to see the pink to the cane better now.
This is such a nice fan. So all we can show is the three factory speeds.
I'll switch it back to forwards and we'll start up on low. The motor is pretty quiet in this one.
I don't want to keep talking about the other one too much because we're going to have a
dedicated video for that but this one is definitely quieter than the other one.
Now I remember the one in my aunt and uncle's kitchen was very quiet also. So it's very
possible that this is the same one that they had with different light shades or at least this was
the same OEM different variant. I don't know. It's kind of a mystery and kind of a fast low too.
I'm an extreme when it comes to the lows. I like a very very slow low you know like 20
25 rpms tops. So this is way off the charts for me but in an average industry average perspective
this is pretty typical. This is probably around 70 rpm. A pretty typical low.
I don't have power information here for this.
In terms of airflow it's not much. I can feel a slight breeze coming down
but it's unimpressive. I certainly don't really feel anything other than directly underneath the
fan. Maybe a slight draft here and there around the room but it's probably only detectable because
it's so cold and it's making me chilly. These are not powerful fans and I remember that about
the one at my aunt and uncle's house. I remember that fan was extremely disappointing in performance
and at the time I didn't understand why because I figured there's so many blades it should move
more air. But I distinctly remember that fan was particularly not powerful and it was flush
mounted so the performance was just like horrible on that thing. But this is very quiet to its credit.
There's a slight hum that resonates through the ceiling but nothing major.
Yeah very very slight hum.
The hum does increase as you go up in speeds which kind of makes sense because the motor's
outputting more power. On medium it's a very weak breeze. It's almost like a low on a more
respectable performance fan. If I come all the way across the room I can actually feel a little
bit of air kicking up against the wall. It's not an impressive amount but it's there. It's more
than I would have expected for what's coming down. It is a very smooth breeze but it just doesn't
have a lot of velocity so maybe it's making its airflow through volume rather than velocity.
The instruction manual, at least for the other one, I'm not sure if this one
does the same thing, but it lists specifications for airflow and on the other one it listed
something ridiculous like seven or eight thousand cfm. No actually I think it was one of them was
8000 cfm because I remember thinking oh the last one was 3733. Let's see what does this one have?
This one doesn't seem to have a spec sheet. No it doesn't even list rpms or anything.
I'm fairly convinced that these are made by two different OEMs. There is a spare parts ordering
here. You can buy a switch for four dollars, the light switch for four dollars, the blade brackets
for four dollars, the blades for four dollars, and the hardware bag for four dollars. The glass is
three dollars a piece or four dollars for two pieces, five for three pieces, and six for four
pieces. I don't know if you can buy the center globe or not. Interesting you can buy spare parts.
Yeah I don't know. I really think there's got to be two OEMs at play here. All right now let's go
high. Things start to get a little bit noisy on high. There's quite a bit of air noise
but not all that much air. The air coming down is like it almost goes into the center of the
fan. It's a very strange air pattern. I feel more air standing here than I do standing here.
It's almost like the air doesn't get strong until almost halfway in.
At the end of the day there's just too many blades. This was never destined to work good.
Yeah across the room here there is actually respectable amount of air coming up the wall.
I don't know how because it barely feels like there's any air moving but I can feel plenty of
air standing up against the wall. Now this particular scenario might be giving the fan
an advantage because the air is like kind of tunneling over here you know in a concentrated
area and it's coming over here and I can feel it very strong right here. I'm not sure if we'd get
the same kind of feeling in an open area. I guess I could come over to this side of the room and
check and come over here and see if I feel it up against the wall here. Get this chair out of the
way. It's about equidistant from the same over here over here. I can still feel air kicking up
the wall. It's definitely not as strong so I think that maybe the layout of the the cabinets or
whatever over there is giving the fan a benefit. I can feel air kicking up pretty much everywhere
but it's a very very gentle, not a very very gentle breeze. Certainly stronger on the other
side here. Yeah it's actually quite respectable over here but just in this one corner. Nowhere
else is it really, well I guess over here too. These two corners but not really anywhere else.
Runs pretty smooth. The blade clock is not horrible. One of the blades is out but the rest
of them are pretty reasonable. Oh the motors are different too. That one's ventless. This one's got
vents. I'm almost completely convinced that these are different OEM. This is just such a nice model.
Even if I didn't have the nostalgia to it, this would probably still be one of my favorite models.
It just looks fantastic. Almost fell. Not the fan, me. I almost fell. Let's see what the airflow is
like on the floor here. Yeah it's actually more powerful down here than up with the fan.
Yeah some fans work more off of velocity than volume. Others work more off of volume than
velocity. I don't quite understand how the two aren't like related directly but there's definitely
a difference I've noticed. I've tested enough fans at this point to tell and the number of blades
pretty consistently moves air very differently. The four blade models tend to be more gusty with
higher velocity and then the more blade models like five and six tends to be more of a gentle
smoother airflow. Does it work out to be the same CFM at the end of the day? I don't know. I think
the CFM ratings are kind of a joke. They're pretty consistently inaccurate and unbelievable.
Yeah I'll put the light on briefly so we can see what that looks like with it running.
This light is very dim so it doesn't really screw up the picture too much but
it's making me a little bit overexposed. We'll come back and show it at night also. Get some
get some shots at night. Better capture the light in the dark I think.
I always like to look at the cane while it's running. I remember that on the
Genoa that my other uncle had in his computer room. Okay we'll go ahead and cut it off now.
Oh and it is a three-way light. The chain is having some problems.
This has got a couple days of hours on it so the bearing should be broken in by now.
you
