Installing a Panama Fan Company Gear Drive Ceiling Fan

TV Electric Fan
2 followers
45 Video Views·Jan 9, 2026
Installing a Panama Fan Company gear drive ceiling fan into the computer room.
Hello viewers, today we're going to be installing a Panama Fan Company, not to be confused with the
Casablanca Panama, gear drive piece of crap ceiling fan. This is probably one of the cheapest ceiling
fans ever made. It has a little shaded pole motor in there with a very small gear and this flywheel
has a very large gear on the outside and it interacts with the small one. It's a 0.5 amp
shaded pole c-frame motor that drives this thing. It's all plastic. The housing is plastic. The
irons are plastic. I think the screws are the only thing that's metal. Even the chain is like
not a real chain. So here's the hardware it comes with. It looks like it's a basic threaded rod
on a j-hook mount. So quite possibly I could put on a longer rod to use it in the living room.
I don't see, does it just screw on and it stops? It's not reversible so I guess it doesn't really
matter if it's locked someplace or not. It's not going to undo itself if it's not reversible.
Surprisingly this thing at the top here is still pliable and soft. I'm not getting the light wire
to come through. What's up with that? It's like a piece of tape or something in there that is
getting stuck on. Leads for lighting fixture only. All right here's all the wiring and it looks like,
which is not a very reassuring way, it looks like it just screws in down here and the wires
are getting all twisted up which is not great. I'm going to turn it backwards a couple times to
put some turns in the wire and then those will undo as I screw it in like this.
That's it. How pathetic is that? That's really something. Now I just realized that I have to
take that back off because this part's not removable so to get the canopies on I have to
soak them on first. Yeah this was definitely never installed. All these hardware bags are
stapled shut. For those that didn't see the previous video, these fans are new in the box
and the original shipping label is to my aunt and uncle's old address. So I guess he bought these
fans back in 1982 and I don't know if he opened it up and said oh boy that's really a piece of
junk or whatever happened and they just never seemed to have gotten installed.
The other one is still sealed in the carton. This one was opened partially.
So one of these screws has got to be for the canopy. Better make sure we save the staple for
some psychotic reason. If you have not watched the other video that I recorded recently on these fans
you should because it'll give you some context. This is a very interesting product and although
there's a fair number of them in the collector community they're pretty much never seen out in
the wild and for good reason. In that video I did open this up and show how it works.
So these are probably all the blade screws. Two, three, six. Maybe this has the screws for the
canopy. Gotta save the staple for some psychotic reason. This looks like it has the motor screws
and then here's trouble with the two canopy screws. That would make sense. I'll have to
probably get new plastic for this when I put it back away. A lot of this plastic is deteriorating
it's not even pre-threaded it just just force it through. Unreal. What a waste of money these
things were. I would imagine these were remarkably cheap at the time but even if these cost like
$15 I would say they're still a rip-off. I guess we'll have to see how the performance is
but at the end of the day the quality is just awful. Doing a problem feeding the wires through
again. I don't know why they would make it so this piece is not removable. That's very stupid.
It's turning this simple task to be very difficult. I could have this done in 15 seconds if the
if I could take off this top piece from the rod. This is a nightmare trying to get these wires to
go through there. Try it this way with them all combined together. This alone I think would be
enough reason for a lot of people to return this. Too difficult to assemble. I could see this really
frustrating a lot of consumers especially those that are not mechanical. All right so it's going
to tighten like this so we have to turn it like this a bunch of times. This is so bad. I wonder
if this plastic is flammable. I bet it is. I don't see UO certification on here anywhere.
I don't remember if it mentioned one in the manual or not.
Okay so now I have to go get a j-hook adapter from downstairs. I have a j-hook adapter that'll
work for this I think to convert it to the box on the ceiling.
This is what we need. Trying not to wreck the place here in the process.
This is a tight fit. It just barely makes it but it will work. I guess I should put the
blades on. Otherwise I have to keep moving the stool around. Put the blades on first.
All right so it looks like oh man I've never seen a plastic ceiling fan blade iron before.
This is a little bit warped I think these blades are. So it's kind of a shame but
nothing we can do about that. Wow this is crazy. So it looks like this goes in here.
Good grief. It's better not spin very fast. It's kind of a scary product if it does.
Yeah that is a lot of force. I do not like this at all. This wood that this is made of
is so like cheap and splintery too. I think if you went to the home depot you could probably
buy a better piece of plywood than this and that is really saying something because the
lumber quality at the home depot has really turned into complete garbage over the last
couple of years. This is so ridiculous. Plastic blade irons. Wow I think this might even be a
little bit worse than rubber flywheels. But in these these things defense they're not broken
yet. I'd like to say this was at least easy to install but it's not. It's infuriating to assemble
so I guess really the absolute only potential appeal to this must have been the selling price
because this is horrible in every other respect. Although we don't know about airflow. I mean I
suppose it could be a powerhouse. I certainly have my doubts about that but you never know.
The irons do actually have decent pitch to them. I just I can't imagine that it goes very fast.
Okay the blades are attached. This is what it comes with for the hook.
Probably the most substantial part of this whole entire product.
Let's see how much of a fight this puts up. It doesn't weigh anything. This is so ridiculous.
It actually went up very easily. It hangs pretty low when you use these stupid things.
Let's see what side of the cord is the high side. I don't remember.
The high side is not textured. One of these days this stool is going to the break
and then we'll have to fix it. What the heck is this downrod? It's just like unfinished metal.
Look at this mess this is leaving on the couch. I can only imagine how many splinters
people got trying to install these. And why the heck did it come with so many wire nuts?
Huh it actually has metal studs in there for these screws to go into.
Stupid flywheel seems better than Casablanca's. Not that that's saying anything. Well maybe it's
stronger than I gave it credit for. I don't know. It's very wobbly though. I want to tighten this
much more than that. It's still wobbly. Whatever it'll just wobble. I'm sure the whole thing is
going to be horrifically out of balance anyways. I really have concerns about the safety of this
thing. This thing is like a toy. It's a total joke. I like the sound of that. I don't see anything
cracking. It just doesn't sound good. There's a total miscount on the amount of hardware that's
required here. It's like people just grabbed a handful of everything and threw it in the box
without any concern. Oh man I can't even imagine how loud this is going to be. It spins down for
longer than I would have expected. Well it's installed and we'll test it out tomorrow.
On video. I'm going to test it out tonight.
