This Chair Tilts… But Not How You Think

Thomas Johnson Antique Furniture Restoration
41 followers
252 Video Views·Apr 18, 2026
Tom Johnson of Thomas Johnson Antique Furniture Restoration in Gorham, Maine restores this fascinating shaker tilting chair, featuring a highly unusual mechanism at its rear feet. Tom has been restoring furniture professionally since 1979. Visit our website at http://www.thomasjohnsonrestoration.com, or write us at [email protected]. And for those on the east coast looking for custom framing, be sure to check out Tom's daughter's shop, https://www.emcollier.com (@emcollierframes on Instagram).
I'm Tom Johnson, Thomas Johnson Antique Furniture Restoration in Gorham, Maine. Our t-shirts are
fully stocked. You can order them from my website. It's a Heather Gray heavyweight crew neck t-shirt
featuring our signature phrase, Looks Pretty Good, printed on the left chest and the logo on the back.
Made in America and screen printed here in Maine. I guarantee it's going to look pretty good.
Here in Gorham we live just 40 minutes down the road from the last active shaker community in
Sabbath Day Pond. Today there are only three shakers left alive there and when you're in Maine
you should definitely pay a visit. It's really neat to learn about their incredible work ethic
and their whole view towards life. The shakers were very industrious and created many inventions
and innovations in all different fields of work and the simple beautiful furniture that shakers
built in their heyday is still famous throughout the world. In this video, I'm lucky enough to
work on one of their most innovative chair designs. It was never really that successful
but they were trying to solve the problem of people tilting back in their chairs.
So if you enjoy this video please hit like, subscribe, share. I really appreciate it.
This is a shaker ladderback chair. Shakers were a communal organization. They peaked in the
last half of the 19th century. They made their money through agriculture and also selling
different home furnishings. Their most recognizable object being these ladderback chairs.
All this information comes from the Illustrated Guide to Shaker Furniture by Robert F.W. Meador.
A very interesting chair is called a tilter and so it's designed to tilt so that you could tilt
back and it has a ball and socket arrangement which allows a chair to tilt back. You'll also
notice that this chair is slanted back and that also apparently was done on purpose also to make
them a little more comfortable from the straight back chairs they started out with. And they made
all kinds of chairs. Some of them all the legs were tilted back. The original ones were straight
and later they made chairs with straight front legs but bent back legs. But this arrangement
was far from perfect. There were a lot of problems. You can see here this one is missing
and the wood around the back of the leg where it's so thin is broken away. That was a common
problem. The Shakers themselves would repair these with a piece of tin wrapped around here.
They also experimented with making a metal ferrule with a metal ball and socket arrangement.
We say experiment because apparently it never went into production. There's only three known
examples of that. So I've got to make a new ball with a pad and I've also got to repair
this little area in the back of this leg. So I'm going to get some wood in here where it's broken
and then I will attempt to determine the diameter of this socket and I'll have to turn one.
So
I think I'll use this section right here. I'm going to use West System epoxy
to glue this piece on. You may have heard it said never use epoxy on antiques and that's
true in as much as you never want to re-glue the joints of a piece of furniture with epoxy.
But for a little high stress repair like this with suspect wood to wood contact it's the best
thing for the job. So while this is drying I can get started on making this ball. It looks like
about one and three sixteenths. So I figured that this ball is one three sixteenths but I was unsure
if this foot made this piece longer or not. But I can see here that this socket is three quarters
of an inch deep. Actually I'm going to say more like five eighths deep. And I can see that this
ball extends above the socket just about a half an inch, maybe less. So with apologies to my
metric friends, the five eighths and one half equals one and an eighth. So it could be that
this ball is a one and an eighth diameter. I was going a little bit big with one and three
sixteenths. The foot is included in that. I might need to make this a little smaller.
I'm going to make a template so I can get this ball right. So I'm going to make two templates.
I'll make one one and an eighth and one one and a quarter, just a little larger.
Well I'm not even close to one and a quarter yet, much less one and an eighth. Now before I do
anything else, I got to finish the work on the socket.
All right, let's try the ball out. All right, looks good. Definitely not too big. It moves freely.
That's good. I can't tell if I'm the same height as that. I'm pretty darn close, that's for sure.
Straight edge looks parallel to this, more or less. I think I'm gonna go with this.
Now how in the world am I gonna thread that piece of leather through there?
And I just realized I can check this for level with the new foot before I install it. Well,
it looks really good. The stretcher seems parallel to the surface, but I am getting a rocking here.
I don't think there's much I can do about this now. I think I should install the new foot
and then if it seems to be a problem, I can either take some off this foot or add maybe a
little bit of veneer to the bottom of the new foot. So the tension on the leather does make
a difference. If I pull it really tight, it doesn't want to move. I loosen it up,
moves a lot more freely. So I definitely want to just leave it loose. Yeah, that seems like a
good level of movement there. Still has a little bit of that wobble, but it definitely might be
the same. I could take a little off this front leg to stop it from rocking, but I think instead
I'll add a piece of veneer to the bottom of my new foot. I'll clean this area with a little
crud cutter. Ended up having to scrape that scotch tape off. All right, this has dried really quickly
like in an hour, but I can see that I do want to put some color on this ball, you know, the foot
itself and maybe tone it a little bit. I'll go over all the parts I shellacked with a scotch
brite pad, just lightly smooth it up. This is a little brown maple dye stain. Oh good, it's not
too dark. My biggest fear was that it might be too dark. And now I'll seal everything with some
spray shellac. Well, the shellac has dried, so now I'll hit it with a little bit of flat lacquer.
I may have to rethink the stain I put on that new piece. This has dried for about an hour.
Now we'll see what it looks like. Not bad. This is a medium brown walnut toner. Okay, I think I'll
take the tape off and then tone this whole area a little bit. Okay, we'll let this dry and then
check it out on the floor. And I'll go over the entire chair now with this orange oil and beeswax
polish. So there you have it. Nice little shaker tilting chair. Kind of unusual in my experience.
The whole chair is tilted back and then of course the socket, the ball foot was missing
and I made a new one. I think it looks pretty good. This job took approximately six hours.
I used the jointer, the table saw, the lathe, drill press, the bandsaw, and these hand tools.
