A Midcentury Modern Rescue

Thomas Johnson Antique Furniture Restoration
41 followers
174 Video Views·Nov 22, 2025
Tom Johnson of Thomas Johnson Antique Furniture Restoration in Gorham, Maine . Tom has been restoring furniture professionally since 1979. Visit our website at http://www.thomasjohnsonrestoration.com, or write us at [email protected]. And for those on the east coast looking for custom framing, be sure to check out Tom's daughter's shop, https://www.emcollier.com (@emcollierframes on Instagram).
I'm Tom Johnson, Thomas Johnson Antique
Furniture Restoration in Gorm, Maine.
I'm hard at work on this beautiful
mid-century modern dining table. It's a
masterpiece. It's the real deal.
I hope to have a video on this project
out by Thanksgiving Day.
I love everything about mid-century
modern furniture, and a piece I was
really happy to restore was this
mid-century bar. It's a beautiful piece
of furniture and had been rendered
somewhat useless by the fact that the
tambour doors, sliding doors, would not
operate. The backing material on the
doors had deteriorated.
This video is really a master class on
how to repair tambour doors.
You'll see the entire piece of furniture
at the end of the video. And uh take
note at how well this bar is stocked. Uh
that's my dream bar.
If you enjoy this video, hey, hit like,
hit subscribe, share it. I'd really
appreciate it.
These are the tambour doors of a
mid-century modern rosewood bar cabinet.
And you'll see the entire cabinet when I
reinstall these in the customer's home.
I don't know why they're called tambour
doors except the word tambour always
involves things that are round like
think like a tambourine for instance.
But what's happened here is the material
has deteriorated and needs to be
replaced.
The first thing I want to do is get a
sheet of MDF.
That's medium density fiber board. I
want to cut a piece to create a flat
surface to do this work on.
[Music]
I'm going to cover this with wax paper
to keep glue OFF OF
I I GOT TO GET THIS HANDLE OFF.
I've got to pry this board off.
And actually, before I pry this board
off, I'm going to mill up the boards to
hold this into place. And I'll rabbit it
out those boards to accommodate the the
tongues on the door.
[Music]
Okay, I'm going to screw these down, but
I've got to get this end board off
first.
Yeah, this keeper was glued down. That's
unusual in my experience.
[Applause]
[Music]
HEAT. HEAT.
[Music]
SO, I was uh getting a little tired of
scraping it. I tried a little heat with
the heat gun, but that really didn't
seem to do too much. Uh, so what I've
done here is I've laid a wet towel on
the fabric uh just for 5 minutes.
Yeah, I don't The water didn't really
seem to want to penetrate this much, but
uh as you can see uh some of it's
ripping up anyway. I'm not sure. I don't
think the water had anything to do with
that. I don't want to soak it down cuz
it'll just make a big mess. And the
other side of these is finished and
water would creep down.
[Applause]
[Applause]
I don't
This is a uh heavy linen fabric. Uh we
call mattress ticking.
I had also cut a second piece of MDF
covered with wax paper that will fit in
here on top of the fabric. I just want
to It's not absolutely necessary to do
this, but I want to ensure that this is
flat.
You can use any type of uh water-
soluble glue.
[Applause]
[Music]
[Music]
Okay, I'll let that dry overnight.
Well, okay. Uh, let's see what we got.
All
[Music]
right. This uh this went down nice and
flat.
[Music]
[Music]
Just a quick note about the gloves I've
been wearing. I anticipate I'd get
comments on that. Just like people used
to comment all the time on the bandages
I had on my fingers. You know, it's that
there's a high of 22 degrees today. Uh
for my metric fans, that's minus5.
Humidity is 25 30%. And the cold shop uh
the cold tools
uh was just killing the skin on my
hands. So I as much as I can,
I'm keeping these gloves on. Moisturize
my hands. I'll show you.
Just trying to keep them that way.
[Applause]
[Music]
[Music]
Heat. HEAT.
[Music]
OKAY. UH, let this dry overnight.
On the second door, I was I actually did
a much better job of cutting the fabric
and and and fitting it here. This is a
little bit off, so I'm going to trim up
these edges a bit.
All right. These are the boards that go
on the inside of the doors. Uh, you
know, to which the right on the inside
center edge. I've got to clean them down
and reattach them.
[Music]
Well, this glue just does not want to
scrape off. Uh, I tried a heat, really
seemed to have no effect, which was my
experience on the tamb boards
themselves, which ultimately didn't
matter. Uh, but what I've done here is,
uh, soaked a little vinegar on it, and
that seems to be working fine.
Okay, let's uh let's see what we got.
Oh yeah, this is great.
Okay, I've got to reinstall these strips
on the inside of the doors. They were
originally glued and nailed, but I'm
going to uh screw them down.
Okay, now I will uh get my kit and go to
the customer's house to install these.
Okay, here I am in the customer's home.
Got a well stocked cabinet here. Uh we
took the doors out from the front, but
they were in pieces. I'm not sure if
they're going to go back in or not. Uh
we're going to find out.
The first thing I'm going to do is
vacuum these tracks just to get any dust
or anything out of there.
And now I'll wax these tracks as best I
can. I really can't get to in the back
or anything.
And I'll also wax uh the doors, you
know, the
these uh uh tongues, if you will, that
are that go in a slot.
So, this opening of the cabinet is not a
a perfect square. The top and bottom are
curved.
So, there's a much larger dimension here
in the center than there. We were able
to pull them out through the center, but
they were in pieces. So, let's see if
it'll go back now that it's all
together.
This is great.
One down. Now I got to do the other one
the same way, but
I don't have this space available to me.
I'm not sure how this is going to work.
Oh, I just realized this was kind of
stuck there. Something was holding it
up, but obviously
it opens all the way. And so now I have
the room to do this.
[Music]
All
right. Now I'm going to go over the uh
cabinet with my orange oil beeswax
polish.
So, there you have it. This is a really
nice mid-century modern rosewood bar
cabinet uh made in the 1960s by Mobler
and uh and it was fine except the fabric
had deteriorated on the back of these
tambours.
And now it's fine. I spent about uh 8
hours on this job. That includes pickup
and delivery. And uh these are the tools
I used.
I think it looks pretty good.
