STONE TALK | How to Use The Angle Grinder | Stone Carving Tutorial

Your Source for Sculpting Tutorials
9 followers
2 Video Views·Nov 14, 2025
In this video I am going over the safety measures you will need to be aware of when using the angle grinder.
STONE TALK NEWSLETTER: https://www.atharjaber.com/stone-talk/
SCULPTURE COURSES: https://academy.atharjaber.com/
SCULPTURE VLOGS: https://youtube.com/playlist?list=PLjA1xVHR_ndB47inBjeSfqnbnE-Mg4Ig1
STONE CARVING TUTORIALS: https://youtube.com/playlist?list=PLjA1xVHR_ndALYNdl9RO65dAUdvgPsmNP
WEBSITE: http://www.atharjaber.com
INSTAGRAM: https://www.instagram.com/athar_jaber/
Hi guys, today I'm going to talk about angle grinders.
They have become an essential tool in sculpture
and they're very helpful in speeding up the stone carving process, but they're
also very dangerous, so they need to be used
with extreme care. So today I'm going to tell you a little
bit about them and show you how to use them.
An angle grinder is basically a machine
with a rotating engine onto which different discs can be
attached to in order to cut, sand or polish a stone.
Let's go over these discs one by one. Angle grinders are mostly used for
cutting into stone and for this purpose we use
diamond cutting discs. They come in different variations.
I personally like these ones because they have these
cuts into the disc itself to keep it cool during the cutting process
and also these three diamond coated stripes will allow you to have a clean
cut inside the stone. Don't use these discs
to cut into concrete because they are especially designed for marble.
High quality angle grinders usually come with a speed regulator with which you
can regulate the rpm of the engine and if
you're using the angle grinder for cutting purposes, the speed needs to be
at its highest stand. I'll give you a demonstration on how to
cut stone in a minute, but you must know that you can use angle grinders for
other purposes. For example, you can use them in combination with grinding discs
in order to quickly shave off large surfaces.
Grinding discs come in a wide variety of materials and shapes.
So just to give you a few examples, this disc
is heavily fitted with coarse carbide grains and it will allow you to quickly
remove large quantities of materials. But for the less aggressive work, I have
these metal discs. They are slightly bent and they are also
embedded with carbide grains. If you look carefully, there is a
number written onto the disc itself. It's 25 in this case and that refers to
the grit of the grains. I also have another one of 50
and here another one of 100 for the finer work. These discs are very
comfortable and they're actually perfect for quickly
shaping large abstract sculptures. You can also
use angle grinders in the final stages of your work, for example to sand down
the sculpture. And for this purpose, there are
specially designed discs onto which you can attach
sanding paper. They come in different models. For
example, this one is rigid and it's perfect for
sanding down flat surfaces, whereas this one has a
soft core, which perfectly adapts to the shape of
your sculpture. But please, it's important to remember
that when using angle grinder to sand down your work,
they need to be set at their lowest speed stand or otherwise you might risk
burning the stone. After sanding down your work, you might
also want to use the angle grinders to polish it.
For this purpose, you have these special wheels.
They consist of many layers of cotton. You attach them to the angle grinder, you
put some wax on them and you gently rub them over your
sculpture. And you will soon see a delicate shine appear on the surface of
your work. There might be many more kinds of discs
out there, but they will mainly be variations on the ones that I have just
showed you. So now that we've looked at the different types of discs that you
can use on an angle grinder, we have come to the main reason for this
video, which is safety. I've seen many photos and
videos on the internet where people hold angle grinders in all
kinds of ways, just because it makes them look cool.
The problem is that these handlings are wrong
and potentially dangerous. So I wanted to take some time
to talk about safety. To understand the safety measurements that needs to be
taken, we must first look at the potential
risks. Most angle grinder injuries are from metal particles that fly off the
cutting wheel and end up into the operator's eye. Metal
discs can also shatter, sending pieces flying all over the
place. Or in the worst case, you can lose your
grip onto them and they might end up cutting into your own body.
For this reason, try to keep the safety guard on at all
times. This is a metal lid that covers the cutting disc
and protects hands, body and face from eventual metal particles that fly
off the cutting disc. It also directly protects your fingers from touching the
disc. Guards on angle grinders should be
removed only for maintenance and storage. Now the problem is that guards make
cutting through stone very annoying. First of all, it blocks a clear view of
the point of contact between the disc and the stone. I'm not seeing anything
here. The guard is blocking that view. Second, it doesn't allow to go very deep
into the stone, as this part of the guard will
eventually touch the stone. For these reasons, the majority of
sculptors use angle grinders without the
protective guard. I do not recommend this, but if you must
do so, please be very careful and always wear
protective gear. And also be aware that if something
happens when using angle grinders without the protective guard, the
insurance company will probably not cover the expense of treatment.
The minimum protection gear that I would suggest is
ear protection, a face shield, eye protection, a mask,
gloves, safety boots, an overall or clothes fitting clothing. Be also
very careful of loose hanging hair or wires.
They might get stuck into the rotating wheel with some serious consequences.
I used to know of a teacher that placed above each tool in his workshop
absolutely gruesome images of injuries caused by those machineries.
Somehow like the pictures that we find today on cigarette packages.
It wasn't a nice view, but it definitely had its effect on the students handling
of those tools. Okay, now that I have outlined the
dangers of the angle grinder and how to protect yourself from them,
let me show you how to use it. Okay, there is one main difference that
you need to know between using the angle grinder for
cutting metal and for cutting stone, and that is the
So when we are cutting metal, we usually hold the angle grinder like this,
and as you know, the sparks then come towards you, but this is actually a safe
way of using the angle grinder because then
the wheel is turning this way, so the angle grinder is going away
from you. If something happens, let's say I let go of the angle grinder
while working, it will go in that way. Think of it as a
the direction of the wheel. Now, the problem with cutting stone
is that if we apply this method, all the dust will come towards us, and this
is a problem because then we won't be able to
see what is happening. You cannot really change the direction
of the wheel, this is always turning in the same direction.
As a matter of fact, if you look here, angle grinders have usually an arrow
indicating the direction of the wheel, so what we do is that we remove the
handlebar from one side, we turn the angle grinder over, and we
insert the handlebar on this side. In this way,
the direction of the wheel has changed, and as you can see, the wheel is now
turning towards me, so now the dust will go away
from me, but, and this is the dangerous part
in using the angle grinder for stone, is that
it tends to come towards me. So, let's say that something happens now, and if I
let go of the angle grinder, this will come against me,
and I've seen many people using the angle grinder
like this, or like this, or in different positions and ways. If
something happens, it will end up in your body, so this is the most
dangerous thing about using the angle grinder for stone.
So, one of the safety measurements that I tend to use
is to place the angle grinder where I want to cut,
and then I place my body outside of this line, so I never stand
behind the angle grinder, but I stand next to it,
so that if something happens, if I let go of the angle grinder,
then it will go past my body, and it will not touch me.
Another safety measurement that you can take is to
put the angle grinder against your thigh,
so that you always have contact, and in this way it will
be impossible for it to come against you.
This is especially important when you're using the bigger, heavier
angle grinder. Another thing that you need to keep in mind is
when using the angle grinder this way, in a place with many people,
for example in a symposium, is that if you let go of the angle grinder,
if something happens, it will go away from you,
so you have to make sure that no one is standing behind you
when you're using the angle grinder. People should stand on your sides,
but never behind you, and not in front of you, because then you
push the dust against them as well. Another thing that you need to make sure
is to always cut straight down, okay? Don't use the grinding wheel,
as I said, in weird positions. It's meant to cut down,
so be aware of that. Also, relax with your body,
don't stress too much your muscles, don't hold everything too tight,
just relax, so you'll be able to have more control
on the angle grinder and the action, and once that you turn it on,
let it run up to its speed, and then gently place it on the line
that you have drawn, and then go back and forth.
Now, I suggest you to put just a slight pressure when going forward,
but then when you want to come backwards, since the wheel is already turning
towards you, don't pull it back, otherwise you'll speed up the process.
Just let it come back, okay? Hold it with your hands and let it
slowly come back, and then go forward again.
So, actually, you're cutting when you're going forward.
Think of it like a wood saw. You're cutting when going forward,
and then you're pulling it back, and then cutting again.
It's the same thing here. Forward, and come slowly backwards,
don't push, and go forward again. And also, when you're going forward,
don't push too much. It has a weight, so the weight will push
the angle grinder down by itself. Don't force anything.
So, another thing that you need to be aware of is,
exactly because the wheel is turning in this direction,
when you're cutting and you're getting closer to the edge here,
don't go too far. Just stop slightly before arriving to the edge.
What happens otherwise is that if you go a bit too far,
you see you're losing contact, you're losing balance, and the
angle grinder will tend to go backwards, and that's dangerous again.
So, try to keep the apex of the wheel exactly
with the edge of the stone. Don't go too far back.
Once you get there, go forward again. Okay, I'll go through the whole procedure
in a minute, but I will not be able to talk during the process of cutting
through the stone, so let me repeat the checklist that I
always go through in my head before cutting stone.
So, eye protection, gloves, and also always remember to
let the disc run up to full speed once you turn it on before making contact
with the stone, and also make sure to stand next to the angle grinder,
not behind it, next to it, away from the cutting disc. Make sure that
nobody's behind you, and don't push. Okay, just gently walk
back and forth. When you're finished, before putting the
angle grinder down, also wait until the disc has
stopped turning. Okay, let me put my mask and ear protection on,
make a clean cut. This is a piece that I took off from this slab.
So, this was a video about safety. If you want me to show you how the
other discs function, please let me know in the comments, and
I'll be happy to make videos about those. And if you have any other questions as
well, or suggestions for new other episodes,
I'll be more than happy to look them up for you.
I hope the information I shared was useful, and as always,
I'm Adar Javver, and I'll see you next time.
