How to Use a Hammer for Stone Carving | Sculpture Tutorial

Your Source for Sculpting Tutorials
9 followers
5 Video Views·Nov 12, 2025
In this video I will explain how to correctly use the hammer for stone carving. I share a few tips to enable you to develop a more efficient, less tiring and safer hammering technique that will help you become a better stone carver.
SCULPTURE COURSES: https://academy.atharjaber.com/
SCULPTURE VLOGS: https://youtube.com/playlist?list=PLjA1xVHR_ndB47inBjeSfqnbnE-Mg4Ig1
STONE CARVING TUTORIALS: https://youtube.com/playlist?list=PLjA1xVHR_ndALYNdl9RO65dAUdvgPsmNP
WEBSITE: http://www.atharjaber.com
INSTAGRAM: https://www.instagram.com/athar_jaber/
Hi everyone and welcome back! Today I'm going to talk about one specific hammering technique and
I'm going to share with you some tips that will enable you to develop a more efficient, less
tiring and safer technique, but at the end also a more pleasurable one. All things that combined
will help you become a better stone carver. So if you're interested let's get right into it!
So the technique that I'm going to discuss today specifically refers to the stone carving club
hammer and if you have watched my videos on hammers you should know that the stone carving
club hammer is slightly different than the regular club hammer and that is because its head is
slightly curved and we will see in a minute why that is. So the stone carving club hammer in
combination with the point chisel, but we will not look at the point chisel today, we will mainly look
on how to swing the hammer, but there are a few theoretical aspects that you need to know
in order to understand what exactly happens during the swinging process so that you can start
sculpting in a smart way rather than just a strong way. So the first thing that is important
and that we need to look at is how to hold the hammer. So hammers have a handle and they would
need to be held as low as possible and also don't stiffen up, hold it loosely, okay, don't hold it
too tight, you need to be relaxed. I see some people holding hammers here at the center and
carving like this, some people even higher up, now that's fine if you want to be delicate, but if you
want to really generate some force and have a strong impact on the stone you need to hold the
hammers way down so that way you'll be able to leverage the force that you can create with that
handle and also generate a lot of acceleration which eventually will result into force. So hold
your hammer in a fist, also don't hold it like this with your thumb up, that will eventually
strain your ligaments here, so hold it in a fist and this will also allow you to do this movement
while swinging the hammer and also gain more acceleration. So now that we've looked at the grip
let's look at the actual movement of the swinging of the hammer and one thing that you should know
is that we should try to use the laws of physics to our advantage in helping us having a more
efficient swing, but in order to understand this we need to break down the movements involved in
swinging the hammer, so let's look at it one by one. As you obviously know in order to remove some
material from a block of stone you need to strike the chisel as strong as possible, so let's see how
we can generate the most strength with the less effort possible. I've seen some people carving
like this from here and striking the chisel like this, so the problem with this of course first of
all you should hold the hammer low down and also is that the distance between the hammer and the
chisel is not enough to generate that force, because you see force is generated by the mass multiplied
by the acceleration, by the speed, so if the distance is not big enough you won't be able to
generate the speed, so in order to do that you would need to strike the hammer from quite a distance
of course don't exaggerate, I'm not saying you should strike it from here, but just from here
would be a good distance and I'll tell you in a minute why exactly from here. So this distance
is key to generate the speed and of course you need to generate speed, so it makes no sense
if you're going slow, you need to go very fast and in order to go fast there is here this
misconception that you need to use your muscles, on the contrary you should not use your muscles,
you should be as relaxed as possible and basically what you should do is kind of
throwing the hammer, keep holding it of course, but you're throwing the hammer against the chisel
and in this way you'll be able to generate as much speed as possible, don't stiffen your muscles
just relax and have a very smooth and fluid swinging movement, for example look at athletes
who throw discs or baseball players for example the moment when they throw that ball
they're very relaxed, their arm is not stiff, actually it's very bendy if you see slow motion
images, so very relaxed and this is what we should do with the hammer as well, very relaxed and
generate that speed but please don't stiffen up, you actually do the opposite by stiffening your
muscles, you'll be slowing down that acceleration and here comes the second important aspect because
if you are relaxed, if your swing is smooth and soft what happens when the hammer strikes the
chisel is that it will bounce back by itself and by bouncing back you will save energy because
what many people do is that they strike and they finish their movements here or some people even
try to see what you're doing, observe your movements, some people strike and just go
beyond the chisel and what happens then is that they need to use their muscles then to lift up
the hammer again up here, now if you do that a couple of times it's not a problem but if you
need to do this two or three hours a day or more well after a couple of minutes you'll be exhausted
so by having a relaxed movement the hammer will by itself bounce back and look effortlessly i'm
back in my first position so i didn't need to use my muscles to lift up the hammer again all the way
up here it's just bouncing back so now we already have saved a little bit of energy by not using our
muscles there let's look at another way to do this as well as you can see i'm resting my hammer here
and this is the beginning this is my zero position as i would say so the weight of the
hammer of course tends to go down because of gravity and by holding it up here you don't need
to necessarily rest it on your shoulder but i'm doing this just to demonstrate the weight is going
down but it's resting on my shoulder and my elbow is carrying all that weight all the way down but
it's not really carrying because it's resting on it right it's easier to carry something like this
than than carrying like this so this is why it's important to begin your movement here
because at this stage you'll have a millisecond of rest i see some people carving like this
all the time now the problem with this is that beside the fact that they need to generate a
side weight force they are also using their muscles to keep the hammer here not from falling down
swinging like this you're also working against gravity you understand that so this is why it's
good to swing like this following the gravity and resting up here using the bouncing back
and you see that the movement is very round and this is why now we understand that the
striking head of the carving hammer is round in order to facilitate even more that movement
right it's very precise the hammerhead is shaped according to that movement now the third aspect
is to find one fixed movement that we can repeat over and over effortlessly because again we're
carving for hours a day and as you probably already have experienced you might hit your
hands with your hammer it's very frustrating it's very painful you might cut your hands and this is
because the movement has not been studied very well i'm always surprised that we never focus on
our movement on our technique but only on the sculpture well at the end this is the goal but
of course we need to study a technique this is our craft this is our profession and just as athletes
break down every movement that they do for their work just as a baseball player again studied how
to throw the ball in the best possible way or a disc thrower kind of athlete they study their
movement we need to study our movement we need to break it down and understand what's happening
so even here i would suggest to try to develop one fixed movement that we repeat all the time
and that reduces the risk of hitting our hands and injuring ourselves so to my experience the
best way to do this is to hold your elbow against your body at all times at least in
the beginning stages when you're developing this technique so basically you should practice maybe
even holding a orange or an apple between your elbow and your body and not letting it fall
while doing this movement so in this way you'll always do exactly the same movement
you have a point where to pivot on and nothing else can go wrong you'll always repeat the same
exact movement because the length of your arm and the length of the hammer are fixed so if you fix
also the point where the whole movement begins well you have always that same movement it's like
a metronome that goes back and forth all the time like this it's centered all around one pivot point
or like the indicator of a clock they're able to turn perfectly round because they're fixed
at the center same thing here we fix the elbow against our body and that's the movement that
at least in the beginning of course later there will be some other movements but to begin with
this is the basic principle and if you need to carve and move around your sculpture
when i do that for example is that i always keep that exact position if i need to carve like this
i just move my whole body so if i don't do this i just move my whole body like this
maintaining that axis here so that i can still swing precisely and securely and of course if
you have a sculpture like this you can move around maintaining that position so no need
to do things like this if you need to carve here just move on this side and then you can
carve like this now applying this technique will develop a muscle memory in the beginning
it will be hard you will inevitably hit your hands you will injure yourself but you have to
train your body to remember that movements it's a haptic knowledge that you need to repeat as much
as possible and after a while you will see that the whole thing will go without any problem and
also practice slowly so again don't focus only on the sculpture maybe if you're carving a couple of
hours a day maybe 10 minutes a day focus on the movement forget the sculpture for a minute and
just focus train yourself and do it slowly okay do it slowly so that you can check everything
and what i mean slowly i don't mean the striking movement that's the only thing that needs to be
fast but what i mean is that you need to check what you're doing so as i said before this is my
starting point my zero position but it's also my ending point so i place myself like this
and my goal is to end up like this after the movement immediately so i strike and i go back
that's it and then you check everything as we said before the hammer is now resting on the
shoulder the elbow is going down it's against my body this arm is relaxed i'm standing straight
i'm relaxed shoulders are relaxed okay strike and come back okay
right and come back so as you can see the striking movement is very fast
but then take a break and check everything make the checklist okay shoulders elbow arm back
and strike and come back also make sure again not to go beyond the chisel and back
and back and check and in this way you will develop a movement that will go by itself
because actually when you're carving you're not watching your arm or the top of the chisel you're
watching the point of the chisel you're looking at your sculpture so you need to focus your
attention on the sculpture so a reason more to develop a more secure striking technique so you
see after a while i don't even need to look at the chisel anymore it's going by itself
because i tuned my body to remember that exact movement so it's always striking on the chisel
and use that bouncing force to get back okay
so as fast as possible back and forth and come back to the zero movement relax and go again
so to recapitulate hold the hammer high up not here or here hold it here stand in front of the
shoulder this is your beginning point elbow down against the body chisel here fast movements
back and forth bounce back don't use your muscles okay so this was it i hope that the information
was useful go practice let me know how it goes and if you have any questions and comments leave
them here below i'll be happy to check them out if you want to know more about me and my side
projects follow me on my instagram page and as always i'm other job and i'll see you next time
