PPO3 is supported by Timber King
sawmills. For more information on my
1220 CRZ mill or one of many fully
hydraulic options, go to timberking.com.
Got a bunch of beams to cut up today,
but I think I've got to make
uh I got to make one improvement first.
I think my offcut slabs have just been
stacking to the side. And the last batch
I cut into uh smaller pieces for the
fire pit, but I can't keep doing that
all the time. in this orientation
because that just gets sloppy
everywhere. So, I think it would make
more sense
to take two really long logs and put
them this way and then just use the
tractor to move the smaller pile into a
much larger stacking zone uh off the
ground easily grabbed by the tractor and
I can move them as needed. when I was
throwing them on the ground over there,
that was convenient, but it was just
messy and really annoying to pick them
up with the tractor and move them and
all that. And obviously, that's not the
best solution. So, I think just staging
these to the side will allow me to uh
keep them organized and tidy while I
build a caddy of some kind or a trough
of some kind to put them in and keep
them nice and organized as I cut them
into smaller sections to use elsewhere.
I'm not going to do that today, but I
think I'm going to put the logs down
today. And if I'm not mistaken, there's
four really long logs over here. Uh, all
four of these are over 20 feet in
length. So, I think I can get two of the
smaller diameter ones uh to check this
box really quick. Yep. Yep. Yep. These
two middle ones. Um,
smallest diameter. I should be able to
move them over there.
Heat. Heat.
Don't
heat
Heat.
Heat.
Heat.
Heat.
Heat.
Heat.
Heat. Heat.
[Music]
Heat
up
here.
Heat
up
here.
Heat. Heat.
Heat. Heat.
Heat. Heat.
Heat up
here. Heat. Heat.
Heat.
Heat.
Heat. Heat.
[Music]
[Laughter]
Heat. Heat.
[Music]
Heat. Heat.
[Music]
Anybody?
Heat. Heat.
Heat.
Heat.
Heat. Heat.
Heat. Heat.
Heat up
here.
Heat. Heat.
Heat. Heat.
7:08 this morning.
And the sun is just peeking out behind
me. Starting to get some color going on
here. Green from the pines, yellow from
the sweet gum, and I think that's a
sweet gum as well. Just red. Got some
colors over here. I'm really glad we
took these down so we can start to see
these colors.
Fall colors are about to explode.
What's going on up there?
And don't whack me with it.
All right, so last night I was out here
till about 8:00 and got a lot done. I
have a tremendous amount of tremendous
amount of weight on these saw horses. Uh
this is all 12footers. I don't have a
12ft pallet.
super handy. I've got one that's that's
that's uh not being used, but it's not
super handy. So, this is all the off
cuts. Um about half of this,
probably not even half to be honest with
you. Probably a third of this is
straight line ripped on both sides. Uh
the rest of it, you know, it's got at
least one edge of Wayne that needs to be
trimmed up. As I was stacking this
yesterday, pulling off for those beams
that are over there, um I was thinking,
you know what? I don't really have a
need for 12 foot stuff. I can get three
stickers per length minimum. Probably
even four. Uh actually, one, two, yeah,
I can probably get four stickers per
length on these cuz they're 12 1/2, 13t
long logs.
Uh so I set this all up here for
stickers. But the more I think about it,
I'm like, you know, there's nothing
wrong with this board. This is a 12 foot
long 1x12. So,
uh or 1x10. Um so, I think I should
actually just keep these and and stick
them out in the yard somewhere to uh to
dry. Uh so, I think that's what I'm
going to start with uh in just a little
bit. getting in the habit of taking
these off cuts, these first cuts, and
setting them over here, uh, right after
I put a log on or right before I put a
log on has been handy. That's that's
really nice to get that out of the way,
and I can deal with that at my
convenience. Yep, that's what I thought.
The uh 12T pallet is buried. We got one
12-footer started up there with two by
material, but I can just take all this
top stuff off and get to that 12T one
that's got the yellow spray paint on it.
All right, that's what I'll do. Play a
little bit more of the rearranging game
this morning. Copious amounts of sawdust
are actually helping me out right here
because we had some erosion problems and
this has built up quite quite a bit and
the tractor can drive on it no problem
in the water. So sawdust is my friend
right now. I also need to once again
swap out the loader implement to get the
pallet forks on here so I can do a
little rearranging for that bunk right
there. Before we begin today's physical
work, this video is supported by Brunt.
About a month ago, I got my hand well my
feet in a pair of these are slip-ons, so
they're easy to do. A pair of work boots
by Brunt. These are the Bullduck boots.
Uh you can get them in waterproof with
or without waterproofing. These are the
waterproof variety. You can get them in
steel toe, composite toe, soft toe.
These are soft toe. And this is my go-to
daily driver for out in the mucky muck
that is a forest of Mississippi.
Uh the soles are super soft. Like
surprisingly soft. Really, really soft.
That was my biggest first impression is
wo these are really really soft when you
stand on them. I have a really really
wide foot. So, there is an insert in
here, a secondary insert that you can
remove to make these boots accommodate
wider feet quite well. That's really
nice. The soles are slip resistant and
heat resistant up to 575°.
They're really, really comfortable and
they're priced accordingly. If you want
to try these, Brunt says try them on the
job site and if you don't like them,
send them back. That's a pretty pretty
darn cool um policy that they have that
I tell you what, a lot of companies
don't have that. But if you're
interested in trying these out, I have a
link and a coupon code you can use to
save you a little bit of money. Check
them out. Thank to Thank you to Brunt
for sponsoring this video. Now, I'm
going to try and not stand in the
sawdust here and put this back on and ow
actually get back to work.
No sawdust on the socks. That was a
success.
Heat.
Heat.
Heat. Heat.
Heat. Heat.
Heat. Heat.
Heat. Heat.
[Music]
What's your winner?
I found top
>> now. Stickers.
>> Stickers. Yay. I like stickers to play
with them.
I already have my own sticker.
>> So, I was wrong. I thought I had a 12T
pallet. I don't. I only have 10ft
pallets. Knowing me. Uh, I probably cut
the 12t pallet into a smaller pallet. I
don't know some I did something but I
don't have the 12T pallet anymore.
Anyway, so all of these boards are um
actually convenient to cut down. So
that's what I did. I cut them down to a
10ft pallet size with each layer. And I
think I think that's actually better
anyway cuz a lot of the stuff that I cut
off was the small sections that had a
little bit of Wayne on it. Like uh right
there and there's got some Wayne on it.
And these these are all all not the best
quality. You know, these have been
sitting for quite a while. And I use
these for uh beam stock, getting the
centers out of them for beams, right?
So, the outside not the best. And also,
there's a bunch of bug holes in here.
And I pulled a few pieces of larvae out.
So, this stuff is not for
not for interior house use, I would say.
I'd still put this up in my shop. So,
rustic pine for shop walls. I think
it'll be plenty good enough for that.
Uh, that means all of this stuff that I
have left has too much weighing on it to
sticker stack as it is. So, I'm going to
um put all this stuff back on the mill
and we'll get this stuff cut down to
stack again.
[Music]
Heat. Heat.
Heat.
Heat.
Heat.
Heat.
[Music]
[Music]
Heat. Heat.
Gentleman has a beautiful German
Shepherd. it. Beautiful dog.
[Music]
Hey,
[Music]
hey, hey.
[Music]
[Applause]
[Music]
[Applause]