Decorating with Paints Fired in My Home Oven - DO THEY REALLY WORK?

Ceramic Art Studio
35 followers
1 Video View·Nov 1, 2025
Hi everybody, this is Anne. Since I purchased my mandala ball tool set, I find that I've been
using those tools on my pottery in so many more ways than I could have imagined. I've shown you
a few of those ways, as highlighted in previous videos. Applying underglaze using the dot shapes
and the mandala patterns is so beautiful and mesmerizing. I thought that since many holiday
shapes are also round and symmetrical, I'd try to pair them up and see what happens.
Making non-functional pieces also gives me a chance to try out the oven-baked ceramic paints.
I bet you've seen them in the craft store. I'll test them out and give you my opinion and tips
on using them as well. Constructing the ornament was very simple. I rolled out a quarter inch slab
of clay and ribbed it smooth. I have a variety of cookie cutter shapes and chose a few symmetrical
holiday shapes as I want to hang these on the tree for the holidays. For the cleanest cuts,
I like to place a piece of plastic wrap over the clay, then cut out the shapes. The plastic pulls
the clay edges downward, so they're not as sharp and makes for quick release of the cutter.
Now I can peel away the plastic and easily peel away the excess clay. If you want to hang the
ornament, you can cut a hole in the top of the ornament or to preserve the decorating surface,
you can roll a small coil, bend it around and cut the ends to fit the edges of the ornament,
then score, slip and attach a hook. When the piece was bone dry, I could map out where to
place the dots. I first marked the centers of all the corners around the perimeter with a pencil.
Using a small ruler, I connected all the opposing dots. Make sure your pencil's nice and sharp.
Now let's map out where all the dots go. I highlighted the very center spot, then began
to create patterns of dots and circular patterns around the center. Remember that using a variety
of size dots and marks makes for a more interesting design. Here are the ball tools that I'll be using.
These tools are quite affordable. There's a link in the description section if you're interested
in purchasing them. I'll be using black underglaze to work with as it's the most contrasting color,
but any color will really work. I started with a bigger dot for the center of the snowflake to
draw attention to it. I used the same size tool to create sliding marks along the outer edges.
These will point your eye towards the edges and back again to the center point.
Switching to the smaller ball tool, I created smaller marks around the center mark.
Using an even smaller one, I created another ring around that center. I chose a bit bigger tool for
another pass towards the outer snowflake arms. With an even smaller tool, I dotted around each
of the outer dots. Now I'm going to switch to a cold baby blue underglaze to highlight some of
the dots. Using the tiny ball tools, I made dots and marks to layer the first sets. I then used the
black again for even tinier contrasting highlights. I bisque-fired the piece and really like the matte
surface. Without adding any glaze to it, I simply high-fired it for this finished ornament.
Now let's do a two-color mandala. On the bone dry ornament, I mapped out my space with a pencil.
This time, I'll be using Amaco blush along with the black. I used a small brush to fill in my
center points, black in the center, and blush in the octagon shape. Using a ball tool, I pulled marks
in the center points around the perimeter. With that same tool, I pulled more marks from the center
perimeter down around the first marks. Then I made a second set of marks around that first set.
I used a smaller ball tool to dot the exclamation points and pull more marks with the same tool
in between those sets. I then dotted the inside of the pink octagon. For even more contrast, I thought
I'd use the blue as some of the dots too. I then used the blush to highlight the dotted ends of the
marks. Now here's the finished version of the same ornament. I bisque-fired it and liked it so much
without the glaze, I just high-fired it. I thought it'd be fun to decorate the star ornament. Again, I
mapped out the surface design with a pencil. I started this project like the last one by painting
the focal star point, then I dotted some areas around the center with different size tools.
I then marked the areas along the star arms and added a few more dots around those.
Once I was happy with the design, I bisque-fired it. Now I could add clear glaze over the top once
bisqued, but I'm going to want to use ceramic paint for the next step, and it doesn't stick
well to the glaze surface without chipping off, so I high-fired the ornament without glaze. Since this
project is sculptural and not functional, I'll be able to test out these PBO ceramic metallic paints
on it. To the newly high-fired ornament, I added gold to the center of some of the dots. The paint needed
a bit of shaking, but it goes on smoothly and I didn't have to dilute it in water. Following the
directions on the bottle, I let that dry completely, then I popped it in my vented kitchen oven at 300
degrees for about 40 minutes, letting that cool down in the oven. In case you're wondering what
would have happened if I'd applied the gold and then high-fired it, the answer is that it would
just burn away at the much hotter temperature. Here's another sample that I made with a heart-shaped
ornament. I tried several of the metallic ceramic paints on this one for a vintage look. Here's
another sample I did on a blown-up ornament. I love how this one came out. If you want to see how
I made it, check out the short video we did on that very topic. I purposely only decorated the fronts
as I can still use the ceramic paint to personalize it with a greeting or someone's name, etc.
But as we're not glazing these, you can also decorate the backs of the ornaments with underglaze
without it sticking to the kiln shelf when fired. Now all I need to do is thread the hook with a
nice gold string or ribbon and they'll make beautiful Victorian holiday ornaments.
Thanks to the newest members of our Little Street Pottery Research Facility team. If you'd like to
join the team and earn a title, click on the Super Thanks button or the link to buy me a coffee.
In any case, we invite you to subscribe to our channel and we'll see you next time in the studio.
