JUST A TIP: EP2 Arrow Repair Guide, How to Fix Damaged Vanes 🏹🔧"

Defending with Past Crossbows
3 followers
Sep 29, 2025
JUST A TIP: EP2 Arrow Repair Guide, How to Fix Damaged Vanes 🏹🔧"
What's up guys, welcome back to another video. Today we are going to be talking about
veins, damaged veins in particular. They are pretty easy to fix. Most times you can actually
repair them in the field while you're shooting in between targets. All you really need is a sharp
knife or a pair of scissors if you're back at your house or maybe you do have scissors with
you when you're out shooting, who knows. I got a whole shot through one vein from another arrow.
We got one where the vein is actually ripping off from the bottom side so it passed through
something and the vein starts to come off. This one the vein actually came off completely either
from bad adhesion or someone shot it off or you shot it off. And then one where you're shooting
broadheads and you get a little bit too close to this other arrow and you slice off a vein and
this one actually has another one coming off. I guess I can't even count the number of times
I've actually shot an arrow with two veins and they fly just the same if it has three veins.
The most important thing to do is to get rid of any loose fluttering ends because it will
cause drag and catch air which will affect your arrow flight. The main thing is just to cut that
off give it a little bit of a sweep on the back side or the front side depending on which side you
have to cut and you will be good to go. So we'll go back to the bench here we'll go over each arrow
give it a couple snips with the scissors. I'll forego the knife today just to speed things up a
bit and I'll show you just how easy it is to get these things back rocking in your cleaver shooting
with your bow. Alright get yourself some scissors. What you're going to want to do I'll start off
with the one that I enjoy the most. I enjoy doing it to other people's arrows I don't enjoy it being
done to mine. Anyways this is the one that has the hole shot through the vein. What you're going to
want to do is come underneath that hole you're going to want to cut no particular angle just
make sure that it's swept back. So I don't know if you can see that or not but go ahead and cut it
back go all the way down you're not going to want to cut past the little valley that holds the glue
what you're going to want to do is then come down from the top leave a little bit of skin on there
basically what we did there we took this piece see if I can flip it the right way
nope that way so we took this piece we cut it off of that vein this arrow will fly just as good as
three fully fledged veins basically that's this the concept that you're taking here you're
implementing that across all the veins the one here that the broadhead cut if this vein here
didn't get sliced this would this thing would be good to go you wouldn't have to mess with anything
but because this thing does have a cut on the top part of this vein this would this would flap in the
wind so you want to make sure you get that off what you're going to do is basically because it's
still a clean cut so you're just going to meet that cut come in underneath just like that you're
good to go as a little sweep action there this arrow fly just fine because there's so much taken
off though I would I mean I would finish shooting it for the day but then after that probably strip
it and refletch it this one here this one probably just went through the target it's got a
tore bottom side of the vein there what you're going to want to do it's it's the same thing
just opposite obviously from the top you're going to go from above where the last piece
of the tear is and come down let's just call it a 45 degree so you're going to come down like this
and then just clean that up a little bit like I said a sharp knife works too sometimes it's
actually easier than scissors if your scissors suck like this and just like that that will fly
just fine and then this one this one's missing a vein you can still shoot this one it's fine
but in order to fix this one what you're gonna need to do get yourself a knife just make sure
it's not sharp you're going to go ahead and get all that extra glue on there don't put a lot of
pressure on there just just enough to cut the glue you don't want to cut the carbon that's not good
get all that cleaned off hit it with a little scotch brite clean it with some acetone and get
the oils off and then you're going to find yourself a jig that has the same rotation as
the veins that you currently have on there whether it's right left helical straight offset
whatever it is put your vein in the clamp set it in the clamp rotate it to where basically you're
just eyeballing this to make sure that it's lined up because it's going to be it's not going to be
perfectly set with the clamp the fletching clamp so you just have to eyeball it get as close as
you can if it's really bad then strip it and redo it again but if you're you know within a couple
degrees it's fine so that's it it's super simple don't think that you can't shoot an arrow just
because it has a torn vein all you got to do is just a little snip snip or cut with your knife
and you're good to go and these arrows are ready to get put back in the quiver and shot down range
and just remember the difference between ordinary and extraordinary is that a little bit extra let
me know in the comments if you guys know what movie i'm talking about oh and be sure uh next
week i am going to be showing you how to build your own diy paper tuner it's super simple super
easy and it's cheap which is important so thanks for watching guys be sure to like subscribe catch
you on the next one bye
