Archery Tips: Learn How To Repair Your Arrows

LEARN ARCHERY
7 followers
4 Video Views·Sep 17, 2025
Hey archery friends, this is Coach Tara. Today I'm going to show you how to repair
your arrows. It's super frustrating when you go to the archery range and you break a knock,
you lose a point in the target mat, or even worse, your fletching starts to come off your arrows.
The good news is that you don't have to go run to the archery shop and buy a whole new set of
arrows. You can actually run home and with the right materials you can replace everything on
your arrow and make it as good as new. So sometimes you'll go to the range and your
knock is going to look like this. So we have to take this one off and we have to place a new one
on. How do you do that? So you're just going to grab a pair of pliers. I use the knocking pliers,
same knocking pliers are used for everything else in archery. And you're just going to gently
squeeze onto the broken knock and you're just going to kind of shimmy it just a little bit there
and it's going to come right off. What you want to be careful of is you don't want to press too
hard onto the knock when you're trying to take it off because if you're not gentle enough,
this is going to happen and it's going to damage the arrow. So you're just going to
lightly squeeze it and just kind of shake it off. All right, so now we're ready to put the new knock
on. Probably the trickiest part is figuring out the right knock size. Because I teach a lot of
beginner classes, I order all types of knock sizes because I have all different types of
shaft sizes. There can be knocks that are too big or too small, so you got to make sure you get the
right knock size. If the knock is too big, you will know because the knock is going to fit
completely over the silver part of this arrow. It's going to cover it all. All right, if it's too small
when you place it on the arrow, you're going to see a ton of the silver hanging out. Way too much
silver. It's not fitting on there correctly. The perfect arrow, when you place it on, you're going
to see a little bit, just a little bit of that silver is going to be sticking out. You see that
just like that. This is what you're looking for. All right, once you find the correct knock size
and you're ready to place it on your arrow, all you're going to do is take some super glue.
You're going to put a few dots of the super glue inside the knock and you're going to place it on
the arrow shaft. Now, be very careful when you do this because it dries pretty quickly. You want to
make sure that you line it up. So with recurve archery, we always have the index fletching facing
in towards us and the string is going to be right here. So you want that knock to fit right into the
string. So it's going to look just like this. If you're a compound shooter, typically your index
fletching is upward and so you're going to turn that knock sideways so that way it can fit in the
string correctly. So just make sure before it dries that you have that lined up nice and good.
And really that's all there is to it. That's a really easy fix when replacing a knock. There
are other types of arrows with different types of knocks. So you also have this type. This is an
insert. Okay, so see how this one comes off. This one's not going to fit on the outside and you have
to glue it on. This one you just stick inside. So you're just going to take the knock, stick it inside
and same thing. This one's easy because this one can rotate and you can change where the fletching,
the knock lines up with the fletching. So that makes it nice and easy. Just be careful if it's
an insert like this that's broken off and you need to replace it. If you come right at it and
you start moving it in different directions, that insert is going to get stuck. And so you're just
going to place the knock on there and just kind of shimmy it out just like that. So that way the
whole insert comes out. They're going to be pretty snug. So it comes with a tool. Place it in the
little tool here and then you're just going to like screw it in. All right and that's how you
repair the knock. How do you place the point in the shaft of the arrow? Super easy. The biggest
thing you want to make sure is when you order the points, make sure they match the shaft size of the
arrow. So for example, these are 1916 shafts. I need 1916 points. What I'm going to do is I'm going to
take the point. I'm just going to place it right in here but you are going to have the insert right
here sticking out and that's because this is the part that we're going to heat up and glue to stick
inside the shaft. So all you're going to need is a propane torch. All right so just make sure you
turn that on and face it away from you. You're going to heat it up. Heat it up nice and good.
All right then you're going to take your tip glue and I'll put some links to different tip glue that
I use. Get that glue on there really good because you don't want it to fall out when you are shooting
your arrow and it gets stuck in the target mat at the archery range. And then you're just going to
stick it right here inside the shaft. Now sometimes if you get too much glue on there some glue will
be sticking out and you don't want that so all you're going to do is take an old rag and just
kind of wipe that down. All right and then if you're working at a workbench or yeah I usually
use a piece of cardboard or if I'm at a workbench I use that. I just kind of push it in. Make sure
it's nice and firm nice and tight against it while it's drying to make sure that tip's in there really
good. And then get your arrows all ready to go. I give it a few minutes let it dry for about 10
minutes or so and you're ready to shoot it. Now we're ready to head back inside. I'm going to take
you to my fletching station. If you notice right here these are from my archery classes. Fletchings
are off so I'm going to show you how to get those fletchings off really good how to clean the arrow
and how to get them refletched. All right so let's go inside. The first thing that we're going to do
is we're going to go through all the arrows and we're going to make sure that we get the arrow
all the fletching off the arrow. So I have a lot of arrows that have parts and pieces still stuck
onto it. So the first thing you're going to do is you're just going to take I use this blade here
you can use a knife whatever you want to use and then you're just going to move away from you
and you're just going to get that top layer off all that fletching. You don't want to dig into
the arrow because we don't obviously want to ruin the arrow. So you're just going to kind of
work on the surface and get as much of that residue glue fletching off the arrow as you can.
So if you guys can see right here just that glue is just coming off nice and easily.
Now if all the arrows are bad I'll just start fresh but in a case like this I don't want to
fletch all the arrows so this one for example I'm just going to re-fletch the one fletching.
I'm going to take some acetone I'm going to place it on this cloth
all right and then I'm just going to clean the part of the shaft that I'm going to re-fletch.
Now the biggest part is once you clean this area you have to remember that you don't want any oil
on there so you want to be really careful that you're not touching that area with your fingers
once you clean the area. I have this jig right here it's called the joe jam it's a six arrow
fletching jig which is nice. I actually have three of them and that helps it to go faster because I
have tons of arrows so I can do 18 arrows at a time when I'm fletching. But if it's just for you
and you're trying to fix your own arrows you don't need something this big. You can go on Amazon and
they have single size fletching jigs so I used to use the Bits and Burger. I'll look on there and
see what are some other brands that are would be good to use and I'll post them in the link below
so that way you can see those. The first thing that you're going to need to make sure that you're
doing is that you're lining it up correctly so when you have a jig like this you're going to see
down here there's these little circles and there's and there's like little bars in them.
Those bars are for you to put in put the knock in all right so it's going to kind of set the
arrow up for you so let's do this one right here all right and what I always do is I always start
with the index fletching the odd fletching the one that's different and I want to make sure it's
facing up towards me okay so let me to make sure you have the index fletching facing towards you
oh I'm touching the arrow um this is going to be horizontal okay so you see it's horizontal in there
so I'm going to set the knock in there and I have my white index fletching facing upward so all
you're going to do these actually click into place so I'm just going to do one rotation of a click
I want to hear it click that's how I know that it's ready for the next fletching all right so
now I'm ready to put the fletching on I know that I need to use orange for this one for this one I
have one white as my index fletching and I have two orange so then the next thing that you have
to do and purchase is you're going to need um you're going to need either veins feathers whatever
your fletching choice is make sure that you are careful what size that you buy if you already have
arrows fletched and then you go and order new fletchings they come in a lot of different lengths
so you need to make sure that you are getting the same style and just to kind of show you
because I have two different sizes see how one's smaller one longer um so make sure that when
you're fletching grab the right size all right so now I'm ready so kind of the way I run on a
production line is I line all my arrows up and then I put my colors depending on what I need
for each one to get your clamp this is the clamp that clamps everything up all the fletchings onto
the arrows and what I like to do is I like to mark my clamp so like right here I have a mark so that
way I'm always fletching in the exact same spot now what you can always do just because I have
archery classes and I have some arrows from long ago sometimes I have Lancaster fletch them sometimes
I fletch them you always want to do just a quick double check you're just going to lay it into your
fletching jig and just make sure it lines up when you put the fletching in there just to make sure
double check okay so what I'm going to go ahead and do and do your best try not to touch the inside
of this fletching right here because I'm going to line that fletching that fletching right inside
the jig so it's going to look just like this and then I'm going to lay it in there and I'm going to
make sure it lines up now that was off just a little bit so I'm going to pull this down
stick it back in there all right now that's lining up really good so now I'm ready to take my
my glue and there's kind of a couple different ways you can do it you can use a facet glue
which is what I typically use but I'm out right now so all I'm going to use for the purpose of
this video is this it's called fletch tight when you're using the fletch tight you want to make
sure it's like a runny watery liquidy consistency because if it's gooey it's not going to work as
well they're not going to stick to the arrow they're going to fletchings are going to start
to come off we're going to make a nice single line I'm going to come right down here right on top of
there you're just going to lay it right down in the groove here and you're going to let it sit
for about 15 minutes you can take your arrow out of the jig and now you have an arrow that's all
ready to shoot I hope this helps you today learn how to insert tips how to replace your knock
and now you know how to fletch your arrow have a great day and happy shooting
