What’s up with those ceiling-to-wall cracks that appear every winter? Caulk is just a temporary solution. What can you do? DIrtFarmerJay explains what is going on and what to do about it.
Buy your DFJ T-Shirt, Cap, or Coffee Mug at https.//www.dirtfarmerjay.com/shop
We’ve noticed there are a couple of spots in our home that we can count on a gap forming every year when winter comes on. It only happens on a few wall-to-ceiling joints (also known as the “ceiling line”) on the top floor of our home. Caulk only provides a temporary cosmetic fix, then they’re back the following year.
What is going on? Truss uplift, that’s what! This is a common problem for homes situated in areas where cold winters with snowfall and late fall and early spring rains occur. The available moisture in the air will ultimately create uplift in the trusses that are used in modern framing approaches for dwellings. More on that in a bit.
It used to be that roofs were framed using a center ridge (supported at the gable ends) with rafters “leaned” against them, with separate ceiling rafters installed to resist spread on the outside walls, as well as to create the plane of framing members to affix the ceiling to.
Nowadays, these elements are tied into a component. A common triangular truss unit is set to a certain “pitch”, called out by rise and run. In the U.S., “rise” is how high the top chord rises in 12” of horizontal distance, known as “run.” In our example, a 5/12 truss will rise 5” for every 12” of horizontal “run.”
All the elements (top chord, bottom cord, webs, and so forth) are affixed with nailing plates. The truss is set on the perimeter walls of the structure and affixed, typically in distances between 16” and 24”.
One of the most used shapes for trusses is triangular. As you know, a triangle cannot change without either un-attaching one of the corners, breaking one of the members, or distorting the shape.
And, the last one is precisely what is happening when truss lift occurs. The bottom chord is typically buried in the insulation that is found at the bottom of the attic. So, that portion of the truss is dry, stable, and warmer than other portions of the truss. The webs and top chords are not insulated and readily absorb available humidity/moisture - so they grow slightly in length.
Because the truss is affixed at the outside bearing points on top of the perimeter wall, any growth in the length of the sections of the truss only has one place to go - to the apex of the truss. When this happens, the webs pull up the bottom chord, creating truss uplift.
This effect can be minimized during construction by not affixing the gypsum board to any truss bottom chord within 12” of any interior wall that connects to the ceiling. Also, using overhanging blocking on the top plate of the interior wall, and affixing the gypsum board there, will assure there is no gap that forms in the drywall at the corner.
If you are working to retrofit an already completed home, it’s a bit more complex, and you’ll need to determine if the annual gaps that form in the winter are worth the investment to fix. Simply filling the gap with caulk won’t really fix it, but it may make YOU feel better!
If you have a smooth or lightly finished “skip-trowel” ceiling, you can try locating the bottom chords/ceiling joists that are within 12” of the offending wall. Once you locate the screws or nails that are holding the drywall to the ceiling, you can remove them and patch and paint. This will allow the gypsum board to “float” more and minimize cracking. It’s not perfect, and it won’t work in every case, but if the annual truss uplift cracks are driving you crazy, then it could be worth a try!
There are not many people that know about truss uplift, but now YOU do. And when it comes to either framing correctly for new construction or a retro fix, you can JUST DO IT YOURSELF!
Buy your DFJ T-Shirt, Cap, or Coffee Mug at https.//www.dirtfarmerjay.com/shop
Follow us on Social Media to know when we’re building projects or releasing new episodes!
Hey, Dirt Farmer Jay here from DirtFarmerJay.com. Are you having cracks appear at the top of your
walls on the top story of your home? What's up with that? Well, actually, there's a name for it
and there's a solution. Stay tuned. Hey, Dirt Farmer Jay here from DirtFarmerJay.com. Today,
we're going to talk about truss uplift. What? Well, that is a terminology for what happens
when there's a temperature and humidity change in the trusses in your home on the top story of your
house. Now, as you can see right up here, we're getting separation on the top floor. This is the
ceiling to the attic right above it. And in certain walls in here, we're getting this separation
occur. Here's one example, the worst in the home. The second one, let's take a look at that. So,
here's another one that we see on a corner where the rafters are running this way right here. And
I'll explain why that's significant in a moment. And then we have a wall running perpendicular to
the bottom cords of the trusses. But you can see right here, it's cold outside. It's warm in here.
We have this right here failure happening. And then notice right here, the colt going down that way
is also lifted. And if this came up anymore, then we'd have failure here. Well, let's look at one
other example. And here is yet another example. This is about 24 to 28 inches from an exterior
wall out that way. And so, here you can see again, the rafters are running this way. I'll explain
that in a moment. And you have this crack appear here. Now, this has already been caulked at the
beginning of the season, the winter season. As you can see, there's just way too much lift and
the caulk fails. All right, let's go figure out what's going on here. All right. So, what's going
on? Well, there's a couple things that you should know about to begin with. Number one, this only
occurs on the top story of a home. It's not going to happen on, let's say, the ceiling on floor one
and there's a second story above it. Why? Both spaces are conditioned and contraction
and expansion of the components are all pretty much the same. So, everything moves together well
there. The second thing is, it's always going to happen worse in what line that the trusses
or the rafters are in the home. So, in this case, the rafters are running like this, this direction.
And behind you is the exterior of the home. We're approximately 16 foot away from the exterior wall.
The rafters or the trusses in this home are set at 24 inches approximately, meaning that the last
rafter that's closest is hitting somewhere close to this. And there is the issue. What's happened
when the house was framed and the sheetrock was applied, it was affixed to the bottom cord of
the truss. And that means when that truss moves, and I'll show you those dynamics in just a moment,
that if lift occurs, this sheetrock's going to go with it and it's going to gap that. Now, you
should know that we've already caulked this approximately two months ago to fill the gap
and it continues to move. And I really can't fix it with caulk, even some of the super stretchy
kind. And you can see that it's just going to break out. It's trying to hold on here, but it
just gives up the goats. Before we go any further, can I ask you a favor? If after watching this video,
you walk away a lot smarter and you like the way we approach the video, would you like the video?
And better yet, subscribe to our channel. And when you do, ring the bell so that you'll get notified
approximately every Saturday of another great video about the home, shop, garden, kitchen,
or just great homeowner maintenance where you just do it yourself. And check out our website
at DirtFarmerJ.com. And if you put a forward slash at the end of that website address
with the word shop, you can also check out our great merchandise. Things like this right here,
our coffee mugs, the ball caps, and also our t-shirts. All right, let's get to it.
All right, you heard me refer earlier to trusses. And what I've done is created a little scale model
of what a truss component looks like in most modern homes. Older homes were built using
rafters, this long piece with a center line or a ridge that was put in, and they are all
leaned up to it. More modern framing methods now use pre-engineered trusses like this. And this is
just a standard truss. This happens to be what's called a 5-12 pitch truss.
Let me explain a little bit of the components here, and then you'll see why it all fits about
what's going on of why that doggone persistent crack keeps appearing every winter along that
wall. So let's look at the different components here. The long across the top, which forms the
slope of the roof, is what's called the top cord. The joining piece that goes along the bottom right
here is the bottom cord. These intermediate pieces right here, those are called webs,
all three of those, although the one in the center is really the king post. Now another common
configuration you'll see on these is like a W, where the post is coming here and then it comes
up like that and then over like this. You'll see both of those, or sometimes the center is left
open to create a whole upper storage area or a loft or a kid's playroom or whatever.
But there's a lot of variations, but you can see this is all put together here in a very specific
way and engineered to both carry and distribute loads. Now I threw on here just a little bit of
modeling here. These are called nail plates and this point right here and right there is the fixed,
or excuse me, the bearing spot on this truss. Now when this is attached on the house, the outside
side of the house, both sides like this, is sitting right here on the bearing point of this truss.
And that's very important to know because this is what causes the issue with truss uplift. So let's
turn this around and we're going to take a look here. I drew some diagrams on this to tell you
what happens and why that pesky gap keeps appearing during cold weather. So in the typical house
construction, of course, the space up in here is the attic, meaning that everything above the
bottom cord is exposed to freezing air, humidity changes, you have ventilation coming out and
usually through vents across the top here. You want that air to move and to be outside temperature
so you don't end up with freeze-thaw problems and everything inside. There's a whole ventilation
system that is actually built in the house. But that bottom cord right there is laying in the
insulation that is right above the sheetrock right here that is in the living space below
right here. So this bottom cord is insulated, it's fairly warm, and most importantly dry.
Not so with the other things up here. So early on as a seasonal change starts to happen
and moisture is drawn in, you have humidity with winter, with things happening early on,
with snowfall and all that sort of thing, these components up here, the webs right here
and the top cord all start to absorb water. And as they do, they're going to swell,
they're going to grow lengthwise. Now notice that we said this right here, this bearing point
is attached on both sides. So it can't grow that way. It runs into the constraints of the outside
wall. That bottom most stable component across the bottom is stopping everything from spreading.
But meanwhile, these are growing. All of these one, two, three, four, five components are growing.
They only have one direction to go. And you see it right here. When you have a triangle,
there's only two ways to move a triangle. One is to break it. Well, it's not going to break,
but the second way is going to distort. And that's exactly what's going on here during
those colder months when all of this gets moisture driven into it and it starts to lift.
This point rises and when it does, it lifts right here and you get a slight rainbow right across
the bottom. And that's why you get truss uplift. Let me show you how it works right
here in our real life example. So what's going on here in our real life example?
Well, as I mentioned earlier, the front of the house is behind you and it's approximately 16
foot from the outside of the wall to somewhere about right in here. So what's happened is
when the sheet rockers put this in, they attach this to that bottom cord along that rafter. So as
that rafter is lifted, the sheet rock is riding along with it. So there's two things that can be
done during framing to address it. I'm going to mention quickly, but if you're watching this
video and you're trying to figure out how to do this existing house, but sticking with me just
for a moment, if you are framing right now, first of all, if you're within eight inches to 12 inches
of a rafter before it hits a vertical wall, don't nail it here. Instead, utilize this kind of setup.
So let's imagine that's the top plate right here of this wall. You have studs running up to it,
and then you're going to put a block along the top and then your sheet rock is going to come
up against that. So it won't lift any further, therefore opening a gap in the corner. And then
by not putting this last one attached, instead bridging here back to the next rafter, either 24
or 16 inches back, then that piece of sheet rock will float and flex slightly and the crack will
never occur. So that's something to keep in mind about using top blocking that stops that gap from
occurring. Now, what about in your existing house right now? If I really wanted to solve this, what I
would do is find the bottom cord of that truss and then using a magnetic finder, find where the
screws or their nail, in this case screws are, and get those screws out of there to allow this to drop
onto this right here. Okay, by the way, this is attached with a whole corner block in here, so it
is very structural as well. This isn't just sticking up in the air, there's actually a piece in here
and I'll show you how to do that in another video about crown molding installation.
But what you're doing is letting the sheet rock set over here. So if I pop those out, then I've
got to patch the ceiling and that's a little messy, a little bit dicey because it's hard to match
the ceiling. In this case, we have skipped troweling. We could probably do it if this
bothered me bad enough. Another common problem that happens around the home is that disposal
in your kitchen really starts to stink. Well, we have a great episode right over here that'll tell
you how to take care of that quick. And while you're at it, YouTube has another video that
they've tailored just for you with all that secret information. How'd they do? Well, until the next
time, this is Dirt Farmer Jay from DirtFarmerJay.com. Check us out at the website.