Another Video some tips on setting up a Traditional Grandfather clock no2

Chrono Chronicles
8 followers
4 Video Views·Sep 29, 2025
Another video with some important & essential tips on setting up your Grandfather clock, this information is also useful on setting up any pendulum clock such as wall clocks etc.
Good morning, this is John from Clock Repairs.
As Mersey said, I just thought I'd do a little video
on how you should install your grandfather clock,
or rather, install the movements
after the grandfather clock movement has been serviced,
repaired, restored, whatever it's gonna be.
Anyway, obviously, the first thing you do
is you're gonna put your grandfather clock back
in its case on its shoulders, which are these.
Okay, position it, obviously,
position it pretty central, really,
so that when you put your hood on,
you know, it's central in the glass
on one thing and another.
Okay, another thing I'm gonna point out to you,
if you look, especially on the older grandfather clocks,
you'll see there's various holes.
Now, these holes are pretty much everywhere, really.
And a lot of the time, they're actually inside the case.
And if you look at the height
of where that is inside the case,
this clock has probably been attached
to what used to be the chair rail,
which used to go around old properties,
mostly, you know, Victorian properties.
You would have a chair rail,
and you would sometimes have a picture rail at the top.
And obviously, that would indicate where that was.
The ceilings were much higher.
They were probably nine foot six,
sometimes 10 foot four.
You know, they were much higher.
Now, my 100% recommendation
is to make sure that your clock is as level,
the case is as level as possible that way,
and also vertically.
Now, the problem being is that,
obviously, with the case being quite old,
the clock being very old, some of them 1740,
some of them even earlier, we've worked on stuff.
But, you know, the general idea, usually, they're about 1780.
So you've got all them years of sun, heat, moving house,
going around the country.
And obviously, that then creates a lot of movements
in the wood, the wood warps slightly.
The seat boards obviously twist, just like this one is.
But the thing is, if you can get that part nearly right,
where it's on a wall, fixed to the wall,
and, you know, it's secure,
that's a good thing in many ways.
Obviously, it's gonna, you know,
make things much easier to set the clock in beat.
Also, it's a safety aspect as well,
because we do do some insurance work,
and we do often see a clock has fell over,
and hit someone, or hit another piece of furniture.
In one particular case, we went to a job
to have a look at it, and it hit a antique boot case,
and done quite severe damage to it,
to it's leathered glass and everything.
So, and the clock had just literally fell to pieces,
due to the fact of its age, and it was pretty much dry,
and it just fell to pieces.
So, we were able to put that back together.
But, you know, the main problem was, obviously,
the damage it'd done to the boot case,
and it could have really hit the old lady,
which is, you know, is something
you've got to try to avoid.
And the other, okay, going on.
So, obviously, the first thing to do
is get it strapped to the wall.
Now, the other way you can get things a little bit level,
is if you go to the skirt of the clock, should we call it,
we recommend that you put a board underneath there,
and it gets put on a board.
Now, people are gonna say, yeah, well, it's a flat,
you know, it's the floor's wooden, it's flat,
but you've got underlay underneath that.
And also, I mean, and often what's happening now,
we're getting to jobs, and they're on carpets.
I mean, you know, the clock case is doing a dance,
if you like, you know, you can't wind it up properly then.
You can't wind it up properly, you can't, you know,
it's just precarious, it's just no good.
So, we're at the stage now with a lot of people,
we're asking questions,
when they come and collect movements from us,
we're asking the question, is your case secure,
what you're putting it to, and all that,
because we're not taking responsibility for that no more.
If you want us to take responsibility for that, we will.
That's not a problem,
but obviously it's a chargeable situation,
it's not part of the service of a clock movement.
You know, that's up to them.
They want us to do it as a job, that's fine,
we'll instruct someone to do that, that's no problem.
But yeah, they're the few things
that you really, really need to put into consideration.
And then when all that's secure,
you then literally can, you know, set the clock up then,
you can put the thing in,
and then you can literally set the crutch,
and you'd only have to work on that crutch wire then
to get your clock in beat.
There's nothing else you'd have to do,
you don't have to worry about the pendulum movement
causing a gyratory effect in the end,
because people don't think,
but you know, there will actually be movement,
that's why grandfather clock stands
are shaped like a sawhorse, the way they are,
it's to compensate for that pendulum movement
back and forth, and it'll, you know,
eventually will cause the clock to sort of slightly move,
and then obviously you're gonna get the clock stopping.
So for us, it's totally, it's absolutely necessary
to make sure that these clocks
are actually fixed to a wall, to a batten.
We fix them to a batten, we put a batten on the wall
about eight inches long, we fix the batten to the wall,
then we fix the clock to the batten.
And also, we always, always recommend the put on a board,
we always recommend that.
You know, these are the things you've gotta do,
it's an old clock, and you know,
it deserves to be treated and installed correctly,
the case needs to be installed correctly,
none of this, oh well, I don't want a board,
I don't want this, I don't want it to look that ruined,
nonsense, just, it needs to be affixed properly.
If you want that clock to work for hundreds of years in time,
that's what you need to do.
I'm a little bit, I get a bit uptight about it to be,
as you can probably tell by my voice,
and the reason for that is, is that we, you know,
we go back with a clock movement
that's been perfectly working for weeks in our workshop,
and we go back, and you're putting it in a case,
and the case is wobbling everywhere, you know,
and, you know, and then we're expected to deal with that,
so no matter how much we adjust the crutch
and things like that, then the next couple of days,
we're gonna be going back there,
and, you know, and we're losing money then.
So that's not business, is it?
So we say to every customer, is your case fixed to a wall?
Is it secure to a wall?
You know, because a lot of people, you know,
they want to do it themselves, or they, you know,
you know, oh, I can do that, that's no problem, you know,
and we, you know, we let them out the workshop
with the clock that's been working for, you know,
weeks without a hitch, keeping reasonably decent time,
working without a hitch, winding up,
weights dropping together, not, you know,
one before, which also indicates problems.
You know, they do these things,
but what they do, go and put it in a case,
and the case is doing a dance around, you know,
where it is, moving everywhere, every time they wind,
so every time they wind it up, it goes out of beat,
you know, because it's not on a board.
So my 100% recommendation,
100% recommendation is to put the clock on a board
and affix it securely to a batten on a wall.
Now, obviously the batten is because most people
are going to have a skirting board,
so we sort of say, well, if you look at a skirting board,
most of them are probably going to be, you know,
a half inch to three quarter, you know,
if you can get, you know, a batten sort of that thing,
or you can get a couple of thin battens.
I mean, we have various,
and some skirting boards are actually thicker,
you know, in some old houses we go to,
you know, they're quite thick.
But yeah, but do remember, obviously,
when you're looking, you wonder what these holes are for,
especially that one there, the chair rail.
I mean, it's being hooked,
but you don't have to, you know, do it in two places.
I'd say just do it, you know,
probably the better place, in my opinion,
is, you know, more in the center of the clock,
and that's where your weights are, you know,
as they come down, the more they're going to go there,
you know, but it really, it's something
that really needs to be done with these older clocks.
I mean, some of the modern clocks are not so bad,
but these older clocks, I mean,
you've got to understand as well,
a lot of them were on quarry tile floors,
and so the quarry tile floors used to sort of,
you know, throw water all over them and clean them that way.
And so, you know, the bottom of the clock
has suffered a little bit,
so it's a little bit unstable anyway,
you know, it's a little bit unstable,
so it doesn't need to be put on a carpet for it,
more unstable, and that's got underlay,
or a wooden floor, and, you know, the bouncy,
you know, it just needs, you know,
these things need doing, it doesn't, you know,
it's, to me, it's a must, it's a must.
But we're becoming very, very strict on that now.
If we have to call out to a job,
and we've told them,
and it should have been strapped on the wall,
we'll be then instructing somebody else
to go back out and fix it to the wall correctly,
that's what we'll be doing.
Obviously, we've got to take into consideration
older people on one thing and another, we understand that.
We're not totally militant about everything,
but we will, you know,
we're not having that as part of the job,
it's costing us hundreds of pounds all the time.
But yeah, that's my take on what you should do.
With, if you buy a grandfather clock,
even if you purchase a grandfather clock,
that's what should be done.
If we sell grandfather clocks, and we install them,
this is what we do.
We don't, you know, we don't do it any other way.
We will do it, we will have a board,
we have boards which are pre-cut,
we have them, they go out with whoever's gonna
be delivering the clock, it goes out
with a piece of batten.
We'll have already surveyed the site,
we'll have had a look, we'll have asked the customer
to take photographs if we can't get to them,
just to let us see where it's going, what it's doing.
Before we take anything in the house,
we go in and we say, can you just show us
where the clock's going, or where your clock case is?
And then we will make them checks,
and we'll look and we'll see, is it secured?
Is it, because, you know, obviously,
we're a business, you don't want to be
putting a clock movement into a case,
and the case is wobbling about everywhere,
and then you get a call the next day,
it's fell over, and then it's somebody,
and they're in hospital, you know?
So, yeah, so, this is John from Clock Repairs Merseyside,
just giving you my strong opinion
on what you should do with a case,
and also for our people who are repairing clocks,
and the people out there, you know,
who are doing service on clock movement,
you know, this is something we all should be doing,
because, you know, I'm absolutely certain,
you know, if you set a clock up in a workshop
and it's working for weeks and weeks on end,
I don't see any reason why it's not gonna work
for, you know, a long, long time to come.
I mean, and my only opinion is,
is that I would say a lot of the time
when a clock's being serviced properly,
it's being serviced well, it's being serviced correctly,
there's no reasons for it, so my situation is,
I believe sometimes it's down to
how it's being fixed to a wall,
or not being fixed to a wall, if you like,
or it's on a sloping floor,
and then as the carpet sinks in,
you know, it becomes more unlevel.
I mean, obviously, if you're screwing it to the wall,
you're keeping it sort of steady, really, you know?
And obviously, you're fixing of things as well.
I mean, this clock, the back of this clock
is pretty decent, really.
I mean, it's just got a couple of holes in it.
It's probably been in the one place.
Actually, I do know where this clock's been,
to be honest with you.
I bought this clock in a few weeks ago.
We have some paperwork with the clock,
and I know the guy, he'd had it for,
I mean, his parents, and I think he was about 90,
and it was his brothers who was 92 or something,
so we know where this clock's been.
So this clock will be getting restored,
and will be up for sale.
A pretty nice clock, actually.
Macclesfield.
Pretty nice, original dial,
but it's been serviced by two eminent
sorts of eminent clockmakers who,
FBHI, I actually know them.
I've actually spoken to one of them in length
about some English Heritage stuff,
and yeah, so he serviced this many, many years ago,
20 years ago, and then it was serviced by another guy
who I never met, unfortunately,
but I would have liked to meet.
Both of them, both of them, really, really good, excellent.
The work is always very, very good.
But yeah, anyway, that's my take on that.
Yeah, so think about the case.
Think about how it should be sited and secured.
This is John from Clock Repairs, Merseyside.
You have a great day.
Thank you.
