How to easily wind & set your vintage grandfather clock

Antique Adventures
14 followers
#Vintagewatch #AntiqueClock #HistoryDesign #VintageClock
Alex Archbold of Curiosity Inc gets a vintage Grandfather Clock wound and running. A quick instructional.
AI Generated·May contain errors
Hey guys, so today's video is on how to start a grandfather clock. Some of you might own a
grandfather clock or have been given one. It's not super obvious on how you would get this guy going
so maybe it is for you guys but for those that don't I'll give you some tips and tricks and show
you how to start a grandfather clock. So here we go. So this model that I have here is probably
like a 1960s or 70s grandfather clock by Craftline. You can see the works here. While that was moving
because I was just touching that a second ago. You have your balance weights, you have your pendulum
and you have your hands of course up here. So the first thing you want to do when a clock hasn't
been started a while you want to make sure it's on flat level ground. If it's crooked it won't
tick quite right and your clock won't work properly. So what we're going to do to get this
guy wound. When you look at your counterweights it has a little chain attached to it and if I follow
that all the way up to the top you can see there's another little piece kind of hanging down here.
This is actually what you need to pull to bring your weight all the way up to the top
and the pressure from the weight dropping is what actually will keep your clock going. So there's
three of these. I've done one. There's the second one we just did. Now we're going to go and find
the third one which is up here. There it is right there. So now we're going to pull this guy all the
way. Some people might think that there's a key that you need. Really old ones I guess sometimes
you can find key round clocks like this as well. This one has the chain which is pretty common
and then the pulley right now is not moving or the pendulum I should say isn't moving.
So we're going to get it started by just gently moving it over
and letting it find its way back and forth. Now the movement of the pendulum will start to get
the clock ticking. It's on nice solid ground here so eventually these chains will settle out and
it'll find its own pace and rhythm. But yeah you want to make sure that it is ticking back and
forth and doesn't stop. We're going to close the case up for now. So just making sure that the time
is set correctly. So it is 3 30 right now just after 3 30 so that should be the right time.
This one chimes on the half and on the hour so once we get to four o'clock today it'll probably
scare the wits out of me because I'll forget that I wound this up and I'm going to hear
grandfather clock chiming away. But that's pretty much it. Now the main difference between a
grandfather clock and a grandmother clock has to do with height. If you haven't heard of a
grandmother clock sometimes people mistake them for a grandfather clock. Basically if a longcase
clock is over six feet tall they generally classify it as a grandfather clock and anything
six feet and under is a grandmother and there's even smaller ones and sometimes they call them
granddaughter clocks. But yeah so they all look very similar it's just a matter of height. So
yeah and if your grandfather clock has really you know like the pants pulled up you know way
too high past the waist that's probably a sign it's a grandfather clock too.
