How to set your Grandfather clock to match the chimes to the time.

Antique Adventures
14 followers
#Vintagewatch #AntiqueClock #HistoryDesign #VintageClock
Please feel free to donate $1 or more to help!
Thank you for choosing Upchurch Clockworks!
AI Generated·May contain errors
Okay, so now we're back. We're going to go ahead and take a look at where our clock is at. So,
if it strikes on a different setting other than the top of the hour, we need to know how to set
our clock back so that it's chiming. The chime matches the time. So, in this instance, we're
just going to go rotate down to the half hour mark. We're going to listen for it.
Okay, so it struck five times. That means the clock thinks it's five o'clock.
So, we need to set our time here to that side. So, the first thing we're going to do is take
the little nut here off the front. This should not be hand tight. In fact, it should be nice
and snug. And sometimes to loosen it up, you'll need a little needle nose pliers or something
like that. But make sure you're not going to use anything that's going to mar up the minute hand
because then you'll scrape the paint off or anything like that. I went ahead and pre-loosened
this one up just so we can use it as an example. So, this clock struck five times. I'm going to
take off my minute hand and I'm going to take off my hour hand nice and gently. Some of these can
be sticky and stick on here. We're going to rotate our hour hand over to the five o'clock hour just
like I'm doing here. I'm going to go ahead and put that back on to make sure it's nice and snug
back to the back of the dial. And we're going to go ahead and take our minute hand and set it up
properly to the top of the hour so it shows five o'clock because that's what it just struck. We're
again you want to use a small needle nose pliers or something along those lines that
doesn't mar up the the nut or the minute hand. I'm just going to give it just for examples. I'm just
going to give it a nice little turn there to just make it snug for now and I'll tighten that up
later. But now we're at the five o'clock hour then we're just going to go ahead and start rotating
until we get to the actual time. The actual time right now ironically is 522. So, what we're going
to do is go ahead and rotate down allowing it to chime at the chime points and I'm going to set it
to 22, 522, which is that. And then we're going to go ahead and give our pendulum a small push
and allow it to continue to catch up. Hope this helps you out with some stuff. Let me know if
there's anything else I could do for you. Put something in the comments and we'll get back to
it. Hope to hear from you guys again. Thanks.
