Installing a Vent Fan at the Off Grid Cabin

The Woodhaven
54 followers
3 Video Views·Sep 14, 2025
In this video, I tear open the back wall to install a vent fan above the stove area.
If you are planning to shop on Amazon, consider my Storefront:
Affiliate Link - https://www.amazon.com/shop/thewoodhaven
Check out Amazon's Hottest Deals (updated hourly):
Affiliate Link - https://amzn.to/3K5ybkn
Check out Deep Discounts on Open Box Tools:
Affiliate Link - https://amzn.to/3MeYZ3h
Music Links: https://artlist.io/Daryl-3392866
DISCLAIMERS*
This video is for entertainment purposes only. It is NOT an instructional video.
This video and/or description contains affiliate links, which means that if you click on one of the product links, we may receive a small commission at no extra cost to you. As an Amazon Associate, I earn from qualifying purchases.
all right so I'm getting ready to
install my drop in Stove Top and uh it's
going to be on this side of the
counter but the problem is I can't
install it until I get my uh vent
installed because I want to center it on
the vent and I don't know exactly where
the vent's going to go until I tear open
this wall and see what kind of uh
framing structure I have cuz I know that
right here in the center of the cabin
I've got a bank of
2x4s so I don't know what the distance
is going to be
between this set of this stud and this
Bank of studs so I need to tear that
apart figure out exactly where that
vent's going to go get that
installed and uh then I'll know where to
install the uh stove top and uh this is
going
to this is going to take quite a bit
because not only do I have to uh tear
this out rip a hole in the wall to put
my vent but I need to run uh the wires
to run that vent so I'm going to I'm
going to have to snake you know some
wiring through the wall as well so it's
kind of a big deal and it's something
that once I start I got to keep going
until I finish I can't leave a hole in
the wall you know
overnight have all kinds of bugs and
stuff coming in but anyway that's what I
got to get done today
so I guess let's get
started I made a complete disaster out
of this place when I put installed those
uh window
casings in the back and uh here in the
front and got it all nice and cleaned up
and now I've got to tear it all out
again so I need to remove some of these
panels and because of that I've got to
remove that window casing and I've got
to move uh my countertop out of the way
get all of this stuff back so I can tear
into that
wall so let me get
that all done and uh we'll take it from
there
wow it's almost 14 1/2 in I've just
about got a full uh a full 14 and 1/2 in
Bay
here maybe I'll look Get Lucky
oh
[Music]
[Music]
all right all right let me get the
uh the frame for the vent and see if
that will fit in that
space it's going to fit I looked out I'm
not going to have to cut into any of my
studs
all right so let me cut this out and
then I'll frame this up got
a couple of 2x4s looks like I bought
more than I
need but uh I'll need them for something
else get that framed up and we'll get
this thing installed
might Sal too soon
yep I spoke too
soon one of the
uh studs is turned sideways
so I'm going to have to cut that
out but it shouldn't affect the
loadbearing strength of this wall I've
got three studs right here next to
it so I'll just have to cut through this
and uh we'll get her framed up we'll
just go from
there okay
so got the bottom of this 2x4 cut
and I need 14 in so I need to measure 15
and 1 12
up and I've made my mark there so I need
to finish cutting the 2x4 out along that
line
[Music]
okay hopefully I can nail this without
splitting it
sure we're still
Level still level
okay and I did uh put a little dent in
here on both of these so I can run my
wire so it doesn't pinch the wire
wire right
there all right
let's throw this up see if
we okay that's going to
work
okay so this
is made for H 6 in walls this is not
quite six inches so I'm probably G to
have to trim some of that out but I'm
not going to know until I
cut this out
[Music]
and then I've got got
this wire that has got me
nervous going to have to really be
careful on that side right
there maybe for the uh tough spots I'll
do those from inside using my multi-tool
I
[Music]
[Music]
okay took care of that
problem I should be able to get the rest
with the jigsaw outside
[Music]
[Music]
[Applause]
[Music]
not sure if you can see from here but uh
here's my sheathing and my uh
siding but over here I've got sheathing
and I've got a
2x6 see that I
cut I cut into the 2x6 a good uh 3/4 of
an inch
5/8 okay here you can get a better idea
of what I'm talking
about so I had to cut in to that I
didn't think that this came over as far
as it did
but but it
did but hey I got my hole cut I didn't
damage my
wires and uh I think with the frame that
I can put around I I just need three
sides that uh this is going to work out
so let me get that pull that board out
I've got a bunch of boards stored under
the
cabin and uh I've got a couple I know
I've got at least one
that is uh stained black I think it's a
1x4 that should work just
fine yep got one right
here should be long enough I think it's
an 8-footer
[Applause]
well it's not quite 8 ft looks like it's
about 6 ft but I think that'll do
yeah that should
work let me measure and uh Make Some
Cuts we'll get that
installed and then we're cooking with
grease
[Applause]
is
all right I got this installed from the
outside so now what I need to do is get
this wired
up and then I can uh put my inside trim
on well then I first I got to get all my
panels back
on then I can put my trim in
is
[Music]
okay I still need to uh connect up my
wiring but uh let's go ahead and see how
this is going to look when I install
this piece
here sorry about the bright light right
there but uh you can see here how it's
going to
look this is a
manual dial to open it it opens up quite
a
bit it has uh I can go in reverse
or um
forward so in would be reverse it has
medium and high out would be forward and
it has low medium and high so pretty
nice
actually I probably be using it mostly
to vent
out and uh when it gets warm in here I
can use that feature to draw the hot air
out and then I can open up my other the
window have a fan pulling cool air
in so that'll be really
nice but uh I
think I think I'm going to call this one
good got everything back in place got my
vent installed now when I move my uh my
countertop back into place I know
exactly where to cut in my uh drop in
stove
top
so that's going to do it for uh this
week's
video so I'll talk to you guys later
[Music]
[Music]
