DIY Off Grid Cabin Build - Episode 07

The Woodhaven
54 followers
274 Video Views·Sep 14, 2025
In this video, I install blocking between the joists and insulate the floor in preparation for the subfloor.
If you are planning to shop Amazon, consider my Storefront:
(affiliate link) https://www.amazon.com/shop/thewoodhaven
FREE 3 Month Trials: https://www.amazon.com/music/amazon-music-audible-deals
(Customers can cancel any time; after the three-month free trial periods, they will be billed at full price for each subscription).
DISCLAIMER*
This video and/or description contain affiliate links, which means that if you click on one of the product links, we may receive a small commission at no extra cost to you. As an Amazon Associate, I earn from qualifying purchases.
Music:
YouTube - Audio Library
Bensound - https://www.bensound.com
Okay, here I'm back at the property and I'm cutting the blocking so that my floor joists are
nice and square. I was consulting with Sam over at Greenacre Homestead and he suggested that I
look into bridging and I did and that was definitely a superior solution. The problem that I have
is you need access below the bridging in order to make it work to get it installed
and I don't have that because I had already put in the bottom subfloor for my insulation. So
I'm just going to go with blocking and I'll keep that in mind next time.
All right with the blocking all done I got my
insulation here and this is six inch insulation and they're in slats 90
93 inch slats which should fit in here perfectly except for the
blocking. But before I put that down I've got a couple of places like right here
that I want to seal up. Okay and I've checked all the other areas and everything else looks
pretty good. That was the only place that I needed to seal up. So now that that's done I'm
ready to lay down my insulation batts. There's always something else that gets in the way of
me moving forward. Right now I've got that post right there
that is just a little bit proud. It's about a quarter of an inch proud so I got to take that
Okay now that all of the insulation is in I'm ready to put in my subfloor. But that's going to
do it for this video. So stay tuned for the next video where I am going to install the subfloor and
hopefully start on the walls. So I'll talk to you guys later.
