DIY Off Grid Cabin Build - Episode 04

The Woodhaven
54 followers
390 Video Views·Sep 14, 2025
In this video, I finish treating the untreated floor joists & complete the floor joist installation.
If you are planning to shop Amazon, consider my Storefront:
(affiliate link) https://www.amazon.com/shop/thewoodhaven
FREE 3 Month Trials: https://www.amazon.com/music/amazon-music-audible-deals
(Customers can cancel any time; after the three-month free trial periods, they will be billed at full price for each subscription).
DISCLAIMER*
This video and/or description contain affiliate links, which means that if you click on one of the product links, we may receive a small commission at no extra cost to you. As an Amazon Associate, I earn from qualifying purchases.
Music:
YouTube - Audio Library
Bensound - https://www.bensound.com
all right here i'm getting ready to
get started on the floor joists
so uh since they're going on the inside
of the rim joists
they're not gonna be eight feet they're
gonna be uh seven feet nine inches so
i'm measuring and cutting them all to 93
inches
[Music]
so
[Music]
[Music]
all right
two down
and let's see i've got uh
eleven
nine more to go
all right i've got all the uh
floor joists cut to length
and the untreated ones have been treated
with the copper coat so and they've been
cut to length as well so we're good to
go i just need to
set my layout
and i'm going to be doing this 16 inch
on center
so um
the way i was taught to do this is you
know you've got these red marks on your
tape
and those are set
every 16 inches and i was taught
to
go by the center
on
that would be the center of my joist but
i when i do that i always mess up
because i'll get it just a little bit to
the left or a little bit to the right
trying to get that thing centered so
what i do is i back off
three quarters of an inch
so i'll go 15
and a quarter and then i'll go
31 and a quarter and i'll do that all
the way down and that will be the edge
of my floor joist so it's a little bit
different it accomplishes the exact same
thing but i'm going to go ahead and lay
that out
[Music]
so
[Music]
[Music]
all right
now i'm just going to do the same thing
on the other side and
we won't be able to
knock out these floor joists
okay so what i've done is i've just kind
of tacked
each of these in
just to hold them in in the right
location then i'm going to square them
up with my square
and tighten them down with the simpson
ties
so
let me
show you how i'm doing that
[Music]
[Music]
[Music]
this one's way off
hopefully i can just knock it with the
hammer
there it's perfect
these ties have these little tabs here
that are act like nails
so i use those to
attach it in place then i can just screw
it in with the
simpson lag screws
[Music]
so
[Music]
[Music]
so
[Music]
[Music]
i'm using these
exterior grade
one and a half inch
sd connector screw strong driver these
are rated for simpson tie
uh hangers
so these have a really high shear
strength
and it makes it go by really fast
[Music]
okay
i'm gonna go ahead and knock out
the rest of these and then i'll bring it
back
[Music]
all right i'm running out of light
so i'm gonna
quick and uh show you what i've got done
i've got all of my
floor joists are in
they're just tacked in
some of them but i've got all of these
done
up to here i've got
this side done on these last three so
i've just got that last side to do
and then i'll be completely done with
the floor joists
but i wanted to
wrap this up before
i run out of light
i've probably only got about another 10
minutes of light here
it looks like i've got lots of light in
the camera but
i don't
i'm
pretty much
down to just a few minutes
so here's one last look
i'm getting close
next thing that i'll be working on is
i'll putting be putting the one by twos
along the bottom
similar to what i did here in the center
you can see along the there i'm gonna do
that between every one of these
so that i can put the plywood down
on the bottom
and then i'll uh
put the plywood down on the bottom
and then if i've got time
i'll uh put my sheath my floor sheathing
on
as well
but uh
i usually only have like a day here i
drive out here
after work on friday
work all day saturday and then drive
back
all day sunday so
i really don't have a whole lot of time
here that's why it's taken me so long to
get all these projects done
but little by little
i'll knock her out
but uh i'm gonna wrap this one up
um
so
i'll talk to you guys later
you
