In this video, I will solve those carb jobs that hurt your brain when nothing you do makes sense by changing jetting sizes. This all works for a healthy motor. Remember the famous quote How 2 Wrench coined....No $500 carb job will solve low compression. You have a good motor? Please proceed with the training! 0.3-1.6mm Mini Micro Drill Bit Set: https://amzn.to/3Jw5jXv Carburetor Tools: https://amzn.to/41naq2e Tool 2 Wrench Amazon Store Links: https://amzn.to/2Ujfu5F Use these tools links to support How2Wrench and know we use the same tools as seen in the videos! Join this channel to get access to these perks: https://www.youtube.com/channel/UCBhM8DCKnT3qXwTW0eToyCg/join -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways One on one Techline: https://how2wrench.com/ols/products/techline-one-on-one Below are some links that help support me and my work. Keep Wrenching, Shane Conley Instructor/Motivator/Motorcyclist
What I'm about to show you, I've never seen anyone YouTube tell.
It's gonna take the mystery out of carburetor jetting when the physics just don't make sense.
You pull your plug, you look rich, you think smaller jet, put a
smaller jet in, gets worse or doesn't change anything.
Or opposite, your lean, you put a bigger jet in, doesn't change or is leaner yet.
What I'm about to show you is what no one's
talking about.
Before we get into it, I want to be transparent. We were not paid for this content.
This is of our own opinion and our own experiences. One way that
you can support the channel is by smashing that subscribe button.
It's free. That really helps us out. And if you really wanna buy us a coffee because we saved
you a ton of money or got you coupons or saved you thousands of being able to get the right
answers, join the channel as a way to buy us
coffee or say thanks. Alright, let's get into it.
Hey, friends. Shane from how2wrench.com. Just getting done wrapping up a set of carburetors here for a customer.
Got talking to him, going over all his notes And I wanna talk about some of the challenges when
, you're doing the main work that people can't do, like clean a carburetor and split the rack and do things like that.
So I get a lot of people who send me their carbs because we have great equipment.
We have the vapor blasters and ultrasonic machines and everything. We can do a great job.
But, ultimately, when it gets back to a customer, they're ultimately gonna have to, decide
the tuning of it or have their local mechanic do the tuning of it, if you will.
And…the challenge is that there's a lot of garbage jets out there.
When you buy, like, these aftermarket jet kits I'm not picking on a brand.
I get tons of these jets and nozzles and needles, and I never use any of it.
These kits, the only thing I use are the bowl gasket and the float needle.
And then sometimes, even the float needle can be troublesome.
it's been a long time, actually, since I had a bad, float needle, to be honest.
But the jets, I don't use at all…for customers.
I'll explain why. And so here we have this let me show you what I'm working on…
So I've got this FZR1000R or R1 one set of carburetors, that we've got them in great shape.
When you see the before afters or if you've been watching the video, see how bad these came in.
He sent me Japanese made…kits that are really cool.
So float needles, bolt gaskets
, no jets in here. Let's go back to the workbench.
Okay. So comparing his notes, he was really happy on a different set of carburetors.
That's where it gets confusing too. It's like, how long did these run?
Did these run at the track? This motor's being used in a car, by the way, a race car.
And
Right?
were incredibly… full of fuel leaks.
Float needles, the needle and c o ring. So you had all this bypass fuel.
The fuel enrichners were leaking. I mean, it's just it was leaking fuel everywhere.
Right? And so
they're running way too rich because they have leaking fuel.
And I don't mean externally leaking. What I mean is
internally leaking into the engine. Right?
So think about this. It doesn't matter what the vehicle is. Right?
Fuel injected, same way.
where it's putting raw fuel into the engine or a carbureted one, you
have, you know, fuel internal fuel leaks, it's gonna make it run rich.
And what happens is a lot of technicians start downsizing the jets and carbureted or they start
, you know, yanking fuel away because they're trying to fix this air fuel ratio or spark plug reading.
So it gets to be pretty challenging because now that I've fixed all those things about the
carburetor, now I've baselined the carburetor rebuild…
This donor set, you can tell, had adjustable needle, jet head, one thirty fours in it.
Just common numbers. You expect to see that on a motorcycle. Right? So…
You know, the weight of the car, the guys running super high
altitude, I think, like, forty five hundred or forty seven hundred feet.
There's just different things going on that we definitely know we wanna lean it down.
But I'm like, man, you throw one twenties in that.
I'm pretty worried about it.
strongly that those were pretty good and not giving him any problems per se.
But we thought, well, let's a little bit on the safe side.
me his one twenties, and then I ordered brand new because if these were
factory Mikuni one twenties, and I'll show you how that works here.
You could see there'll be a couple of different things. Okay?
That's one clue that it's factory. And then there'll be this little, like, symbol on the top of it.
See if we can zoom in there… Yeah. Right there. K.
good indication that it's authentic… Mikuni jet.
Right? So
If one thirties were stock, you were happy at one twenties, let's try a one twenty five.
Factory, Mikuni, because we for sure know that everything is new about this set of carburetors.
Because he was concerned, well, you know, maybe I had some internal leaks I didn't know about
on these, but it's better to be a little bit rich than way too lean.
Right?
twenty twos so that he'll already have his one twenties, then have one twenty twos, one twenty fives.
You have a nice little selection to then fine tune the vehicle.
And he says, I've got a bunch of jets, you know.
And what I believe a known good number is, is a brand new in the package
jet, and here's why. K. So this came from Mikuni, a Mikuni wholesaler here.
These are absolutely authentic jets, and
So take it happens to be this drill right here.
I'll come back to this in a second how I do it, but I just wanna make a point.
this brand new drill, k, not use the drill side, use the other side as basically a guide, a
measuring pin, if you will, to then determine that size.
K?
thirty fours, the factory one twenty fives, factory one twenties, some jets I had laying around.
And this is why I thought it was such a great example to show you how I do this and how I think you should do it.
When you got drawers full of jets and you wanna start using some of this stuff, maybe you got boxes of it here.
I know this one here is a big one just full of jets.
I measure them. Okay?
So I'll start with one brand new…jet. So I have kind of a baseline.
I know how the vehicle ran with, you know, a particular jet.
Right?
And these little drill bit sets that I got that I'm gonna talk about here today, they are pretty cool.
They're incredibly inexpensive compared back to the day.
This was the first set I ever bought. I bought this little MAC set off the truck on the
nineties, and this thing, I think, was, like, ninety bucks.
I've got my drill bit set that I never use. Okay?
This is what I call an index set just to use for sizing, but it really ran out of the sizes I needed.
It had a giant jump, and then I didn't get the benefit of really micro tuning.
So I ordered these off Amazon here recently, just tried something new
, and, man, they were dang good except for I ran into
one problem. When you look at the sizes here…
K. These are all metric. The one point two and one point three, they were the same drill bit.
And all three of them,
You know, here you go. Now you'll have something to compare with. Like, gosh dang it.
, of the one size I needed…to have a difference was off.
So you notice here I've got a one twenty two, which would have been labeled one point two
millimeters, one point three two, and then I've got this one two six, which isn't on here.
I wanna show you. I made it. I'm gonna show you how I made it so that I could come up with my own custom size.
Matter of fact, to true to the one point fours weren't very good.
I grabbed another index set that I had, and that's just got a bunch of broken drill bits and whatnot.
And I robbed that good perfect one point four and put it in this one.
And so I'm gonna label this as, obviously, as my set to use.
And then… now, after I show you how I made this, now I've got this awesome in between one.
Right?
I don't know why would you make a drill bit, you know, or a drill gauge. Right? And
be able to just go online and I might be able to purposely buy a one point two five millimeter.
I don't know. I don't know what's out there, so it's just easier for me to
shop today to just make it. So pretty cool stuff.
Hey. I'll tell you what to do. I'll put that how I made that drill bit in a separate little video for channel members.
I don't think everybody in here would be as interested in fabricating, something that precise when you could probably buy it off the shelf.
But if this is your jam and you dig it, I was, pretty excited how it turned out.
I thought it was a little bit ingenious myself, but let's just hop back into the video on how I
use that custom, size to really be
sure about jetting. Thanks, friends. I appreciate you.
The thing I wanted to talk about, those aftermarket jet kits I was
talking about, a lot of times they don't come with any sizing.
K? So they just throw a jet in there and they say, oh, use this, and you bought it for a model.
I mean, I have single cylinder, you know, four wheeler jet kits in there to sport bikes, to Harleys, to everything.
I compared probably, you know, dozen different jets, and they were all the same jet.
They were all the same dang size. I mean, how crazy is that?
And, the aftermarket company, and that's the problem with this,
Amazon stuff that's really cheap, is they're saying it's for your model.
So if you're not really experienced, you could be thrown it on there, and then you could just be having a problem.
And I'm a tell you, how could a thousand cc four cylinder sport bike run the same jet as a single cylinder four wheeler?
I mean, it's just not gonna work, and you could cause a lot of damage using those jets.
So mark my words, get OEM, get good ones so you have a comparison.
But once you have a comparison, now I could take and I could either if I wanted to, I could even size them myself.
But more importantly, I could go ahead and go, okay. Wait a second here.
This one twenty five let's take a look here. I got a couple of them sitting in the little holder right here for me.
So this one point two six millimeter
…fits pretty dang good. Check this out.
…K. I'm gonna go in there. And I get just a watch the end
… here, and see that rocking…hardly at all, barely at all.
I'm not resizing the jet, not causing any damage to anything.
K.
They were just labeled one twenty six. I don't know whose it is, but it
fits literally the same.
So and even when you're jetting, you typically go in steps of five.
Like, if you have a one thirty, you'll try one twenty five, or if you have you know, or a one thirty five if you wanna go in either direction.
In the aftermarket world. You're usually not splitting hairs between like one twenty seven and one thirty two or something like that.
But you'll get a pile of OEM jets after doing jet kits over the year, where if you're a shop
especially, you're gonna end up with a million different jets that are those oddball in between sizes.
And once again, this is fantastic way to, micro tune what you're doing.
Right? Okay. So I'm pretty happy with that. This aftermarket one twenty six, you know, had
I known that it was good, I would've went with that.
I wouldn't have even ordered the one twenty fives. But how do you know if you don't have something to compare it against?
Right? So now we know. Now we have something to compare it against…
be able to go in here and then prove, you know, what size it is.
So, like, this one point three two doesn't fit in either of them.
And then when you're too small and this is why I made a custom one, is watch when I'm too small what happens.
Get a little zoomed in. It's just…way too much floating in there, which
obviously and I'm I'm a bigger hole than this jet.
Now that does allow me to, like, gain some insight because I could start to watch the deflection.
And I know, do I want a bigger hole, smaller, or am I going richer or leaner?
But I'm not gonna lie, is super confident by having the one that I made that'll allow me to be in between.
It's just a bummer that these kits are saying that those two sizes are there, but they aren't.
So the other thing I noticed about all of these is no matter what the
size was that was labeled on there, it errored larger.
It didn't errored smaller, it errored larger. So if it said it was a one point three
millimeter, it actually was one point three two typically between all three of them.
So interesting little fun fact.
Okay? So we've got a twenty five, aftermarket twenty six.
Don't know what it is. Let's go back to my custom made jet here.
Okay? Now here we have… they were the one twenty, one twenty six.
Here's a one twenty. K… This is a one point two six millimeter.
K? Let's look at this one twenty… Doesn't fit.
So that's good. We'd be happy with that. Right? I mean, not at all.
Here's a one twenty two. K
… Doesn't fit.
K. So we're happy with that. Right? Let's try that smaller one… K.
Let's try the one twenty with that factory ring around it.
These are OEM.
Now we're starting to… try and do this one handed here
… Let me switch it up in the rig…
Okay. We've got the one twenty two aftermarket here.
We have the one twenty two factory, and I'm using a one point two That's a coincidental
…connection there on that point two two millimeter in the jet sizes, just so you know.
You can't rely on that as a jet size. K… So I am in the factory one twenty.
K? And it's a really nice, nice, tight fit.
I'm in the one twenty two. It's the exact same tight
fit…
It's you cannot trust those numbers… on an aftermarket jet.
Okay?
to have…is…they run a bike.
And if you're a do it yourselfer, maybe at the track, you're going to run, look at spark plugs and assess how that engine's running, right?
And then from that jet number, you're going to go, okay, I'm rich or I'm lean.
You're You're gonna make a decision, and it depends on the quality of the jet, the size of the holes, at OEM, is different.
All things are not equal.
I'm gonna get back to finishing up this customer bike. This was a long overdue piece of content I wanted to make for you folks.
So if you haven't done so yet, make some comments below, you know, what methods you do.
I'll put some links to the micro drill kits even though they have that one off.
Unbelievable price for the cost of those to get you the ninety nine percent and to get me, a
blank piece of material that I could go ahead and custom make my own.
So super, super rad there. Alright, my friends. As
always, like, share, and subscribe. Make it a great day and keep wrenching.