Check Out Our Patreon Account, for Unreleased Repair FAILS, Concise Repair Tips Not Possible In This Long Form Video, And 1 on 1 Repair Assistance with YOUR Project!
Thank you to everyone who has been supporting our channel! If you use the link below before you purchase anything on Amazon, we get a royalty for sending you there, thank you!
Our store is located at 139 Caldwell St., Rock Hill, SC 29730.
Ladies and gentlemen, this is Joe's
Classic Video Games back with another
cool arcade game repair video for you
this evening.
This time we have
the queen of the arcade,
Miss Pac-Man.
Can anybody think of a more popular game
than Miss Pac-Man or Pac-Man?
You can play it on just about any
console.
I can't think of one off hand that you
can't play Miss Pac-Man or Pac-Man on.
I'm sure there might be one or two, but
they made a ton of these things and you
can play it on any console.
Anyway,
somebody called me the other day want to
know if I could fix their Miss Pac-Man.
I said probably
bring it on by. I didn't even ask him
what was wrong with it.
I'm pretty sure we all know what's wrong
with it.
If you know what's wrong with it, just
leave it down in the comments.
So, at first glance,
it's an okay shape. I guess somebody has
obviously replaced the top that's got
plexiglass on it. Really thick
plexiglass.
Originally
it would have had glass on it like this
one. This is original Pac-Man,
but it should have had glass on it.
It's missing the little coin
bezel there.
They don't I don't think they really
care too much about cosmetics. They just
wanted to play.
So, somebody's changed the top.
That underlay looks like it's been
replaced, too, cuz it looks like it's
been cut off.
The monitor,
without even opening it, I can tell the
monitor's already been changed
because number one,
there's no burn in.
Number two, I can kind of just tell by
the gray color of the tube.
And number three, it doesn't have the
little tinted
bezel that's supposed to be laying uh
over this.
So that's that.
So I haven't looked this thing over at
all. I basically just started the video
and started talking.
But there we have it. Don't know what's
wrong with it.
Didn't ask him. But we know. We know.
Nolan knows what's wrong with it.
All right, let's see. Throw that over
there.
We're going to
reach in here,
uncip that one, uncip this one.
Then we're going to try to open it with
one hand here and tilt it.
Told you somebody done swapped the
monitor.
All right, so that's a newer style
monitor. Don't really know what brand
that is.
Whatever.
Got the game board here.
Somebody's done been modding it. They
done modded it.
So, originally it's got these two
character ROMs here. Then it would have
had four more ROMs here. But somebody
has taken all those out and put in a
bigger ROM here which has all of those
ROMs on it. They just modded it where
you could only use one ROM.
I know what they were doing.
Well, everything looks all right in
here.
The monitor is probably bad.
It's broke.
All right. Well, ain't much left to do
here but plug it in and see what
happens. What do you think? I'm just
doing all all in one shot here. Not even
going to cut the the the camera off.
Guess I probably should have backed up
like that. Oh well. Hopefully you guys
could have seen all that. All right,
we're plugging it in.
Plugged in.
Now we're going to pull out the little
interlock here. This is there for
safety.
So is that cardboard.
So that's a little uh interlock switch.
Basically, whenever you cut open the
door open, it cuts the power off so you
don't reach in there and touch the anode
cup and get electrocuted.
But if you pull it out, it'll stay on.
So, that did nothing. So, now they must
have it turned off at the power switch,
which they've got it hid down there.
So, you reach under here
and push it on.
So, now we got lights.
Sounded like the monitor turned on for a
minute there.
Let's go see.
Don't look like it.
All right, let's hit the button.
Nothing.
Let's coin it up. Maybe it's not on free
play.
Hit the button again.
Nothing.
All right. So, maybe the monitor is on
and we've got a fuse problem or a board
problem.
We do have neck glow.
Got some neck glow there. I don't think
it's coming in on camera.
But I'll turn up the flyback
like so.
Monitor is working.
Turn that back down a little bit.
Okay,
monitor's good.
Just take that off. Push it back on real
quick. Then we can wiggle this a little
bit. Make sure that's seated in there
just right.
Then we're going to wiggle this one a
little bit. Make sure that's seated just
right.
Well, I'm going have to get my
multimeter probably.
All right, it's multimeter time.
Got to check those fuses.
All right. So, Pac-Man doesn't really
have a power supply, per se. It uses
these transformers to make the power to
come over here and power the board. But
it all runs through all these fuses.
And these are bad about getting they
loosen up over time. They stop making
connection. So, even if your fuses are
good,
it may not be connected through there.
And actually, if you look at that one,
it looks terrible.
See how green it is?
Right there.
So, you don't check the fuses.
Well, you check the fuses, but you
really what's more important is if it's
connected from here all the way across
the fuse holder to the other side.
So, I'm going to go through
and check all the fuses.
See if we've got a bad one.
All right, let's see.
Start with this one.
That one's actually good. The one that
was all corroded.
That one doesn't look too great, huh?
And it's supposed to be like if you
connect them together, supposed to be
connected. That's connected. 0.2.
There's always a little bit of
resistance. You're never going to get a
0.0 usually.
So, the second one,
second one's got issues.
Third one.
That's probably all right.
These four over here are actually the
most important ones because they're the
ones that actually make the power.
First one.
First one's dirty.
Second one's dirty.
Third one is probably our problem
because it appears to be blown.
Fourth one
must be blown.
Oh yeah, the fourth one wasn't even I
mean the third one wasn't even
connected. It they literally just fell
out in my hand. Nothing was holding it
in.
This one was just laying in there.
See if the actual fuse is good.
Fuse is good. connector was shot.
Fourth one.
Fourth fuse is good, too. So,
this 5 amp fuse wasn't even connected.
So, that's going to be our issue. So, I
got to
I'm going to try to clean and adjust
that one. Sometimes you can get away
with filing it down, cleaning it, and
bending them back where they've got
tension on them. If that doesn't work,
I'm going to just swap it. If I if I've
got a single fuse holder back there that
I can find, I may just go ahead and swap
it. We'll see.
Look at what I found.
So, I'm going to try to clean the other
three. That one right there is pretty
bad, though. It was loose as a goose.
So, I'm just going to plop this baby
right down in the middle of it there.
Screw it in. Solder my wires where they
go.
Clean the other ones. And we'll test it
again.
All right. So, I ended up having to
change all four of those on that side. I
was just going to try to get away with
changing the one, but you know how that
goes. Anytime you're trying to do that,
it never works out. So, I ended up
having to change all four of them
because another one broke while I was
messing with the third one.
Also cleaned all three of these. They
still seem real solid. So, I changed all
four of those.
I was going to film it, but you wouldn't
have saw anything but the back of my
bald head anyway. But I mean, you can
tell that I swapped them. You can see
they're obviously new. See those four on
the right?
Just go ahead and take my word for it, I
guess. All right. So, let's check them
now to see if they're making better
connection.
That one's good.
That one's good. This was the one that
was loose.
That one's good.
That one's good. That's about as good as
you're going to get. See, even even when
I got them connected like that, 0.2 is
about as close as you're going to get.
All right. So, I think that's going to
do it. I mean, it obviously wasn't
connected before.
It basically fell out of the fuse holder
when I was checking it the first time.
And does anybody know what that hippie
said?
Power supply. Power supply. Power
supply. That's basically the power
supply that sends the voltage over to
the board. No voltage.
No Miss Pac-Man.
All right. So, here we go. We're going
to try it again.
Let's go see if we got anything on the
screen now.
Yeah, buddy.
Yeah, buddy.
We're making money now.
Let's see. I don't think it's on free
play. Add some credits.
Turn it up a little bit.
This is the volume control right here.
This little wheel.
[Laughter]
All right. So,
I think it's going to be good. I'm going
to fold it back up
and we'll try it all out. Make sure both
sides work and everything seems to be
fine. I don't think I'm going to mess
with the monitor if it if it keeps
working and it's looking good
cuz they just they didn't care about
cosmetics that much and that monitor's
not that old. So, we'll see.
I guess I should have mentioned this
before, but this is a Miss Pac-Man
cocktail table.
You know, these were found in Pizza Huts
and stuff like that. A lot of people
call them Pizza Hut style.
Pretty popular.
All right, I went ahead and put it on
free play form
and we're going to try it out. See if
she works.
You ready?
[Music]
It's the fast version.
So, when Miss Pac-Man first came out,
she started off slow
and then she got faster as the levels
went on.
But what was happening was
people were playing too long on a
quarter.
So they came out with the fast version
which makes you get through the levels
faster
and it makes you take put more quarters
in faster. Your quarters gone faster.
I like the fast version. Once you play
the fast version, it's kind of hard to
go back to the normal speed. Heat. Heat.
[Music]
[Laughter]
I don't really chase the ghost that
much.
I try to just get to the next board most
of the time. Some, you know, on these
early stages, I'll do it a little bit.
But I don't usually chase the ghost that
much.
I just try to get to the next level.
[Music]
It's got a nice monitor on it.
I don't think it's that old.
Why?
Why?
Why?
Why?
Why?
[Laughter]
Mhm.
Why? Why? Why? Why? Why? Why? Why? Why?
Why?
seems to be working.
why
why
[Laughter]
What you think?
[Music]
[Music]
[Laughter]
Why?
Why?
[Laughter]
Why? Why? Why? Why?
[Laughter]
Why?
Why?
[Laughter]
[Laughter]
Right into it.
[Laughter]
Dang.
Messed up on that deal.
Why?
[Laughter]
Why?
Oh, come on.
[Laughter]
[Music]
[Laughter]
Why? Why? Why? Why?
Why? Why? Why? Why? Why? Why? Why? Why?
Why? Why?
[Laughter]
Wow!
[Laughter]
Heat!
Mhm.
[Laughter]
[Laughter]
Oh,
thought I could have got him.
Why? Why?
[Laughter]
Oh crap. I thought I was done.
Well, I didn't see those down there. Why
didn't somebody tell me?
There you go. It obviously works
perfect. top of the line. I'm gonna try
the two player side just to make sure
that it flips over.
[Music]
Make sure it's going to flip. Is it
going to flip? Yeah, buddy.
This side works good, too.
All
right, there you have it.
Little Missy Pac-Man.
Thanks everybody for watching. and we'll
see you on the next