Check Out Our Patreon For Exclusive Content, Unreleased B-Reels, Concise Repair Tips, and Personal One On One Advice On YOUR Repair Project! https://patreon.com/JoesClassicVideoGames
--------------------------------------------------------------------------------------- Thank you to everyone who has been supporting our channel! If you use the link below before you purchase anything on Amazon, we get a royalty for sending you there, thank you!
Our store is located at 139 Caldwell St., Rock Hill, SC 29730.
ladies and gentlemen this is Joe's
classic video games back with another
cool arcade game repair video for you
this
evening well a guy dropped off six games
for us to repair the other
day and I actually just got
finished uh fixing the
arcanoid you may have already seen that
video if not you got to go watch that
video boy it was a good good one you
don't know what you're
missing but anyway I got that one fixed
um so today I think I'm going to start
on the Galaga and hopefully that goes
smoothly I tried to get a list like
Ronnie once I tried to ask them what was
wrong with each game and I wish I would
have been recording it but I'm always
afraid to record customers you know they
might not like that this guy doesn't
watch the
channel um he's getting these repaired
for his church for some kind of youth
group so he doesn't want to spend much
money and he doesn't want to he's not
worried about Cosmetics cuz he thinks
the kids are going to mess him up
anyway and uh I talked to him a few
months ago I told him to go ahead and
bring him down well he's been kind
of I don't know he's he hasn't felt like
bringing him down so they've just been
sitting in his trailer for like 3
months so he dropped them all off the
other day and I told him I'm going to
run right through these things I need
them picked back up cuz I'm kind of
full people use me for
storage you know they they they just
want the game out of their way for a
little bit and then I fix it you know in
a few days and sometimes it takes months
for them to come down here to get them
so I wanted to make it clear I'm going
to fix them but I want you to come pick
them up I want my money and I want my
room okay he acted like he understood
I wasn't that harsh but I I was trying
to be um but anyway got the arcanoid
fixed we're going to do the Galaga
next what was I saying something about
the list I was trying to get a list I
wish I was filming the
thing what the heck did I do with
it why I lost it now oh this might be it
yeah so the arcanoid he said it had no
sound the Miss Pacman said it was loud
and maybe the screen had problems the
gallaga
said no sound and the buttons are
sticky I find it hard to believe that
the sound is out on all of the machines
I think he's just making up stuff the
blitz screen question mark
the NBA
Jam he said it was working Friday and it
wasn't working Saturday so these people
have you know they don't know what's
wrong with them so the list is pretty
much useless they're broke is what's
wrong with them they're broke I've got
to work through them anyway but again
I'm not going to go
through I'm basically doing as little
work as possible CU he told me he was on
a budget obviously it's for his
church so I'm not going to go through
and fix every little thing I'm not
worried about the
Cosmetics um he really wants all the
Marquee lights to work though he's more
concerned about the marquee lights than
anything it seemed like
but anyway we're going to get the Galaga
out and plug it in and see what's going
on with
it all right I plugged it
in looks like the power supply lights on
I don't
think monitor's on
yet it does have an original board in
it it's a newer style
monitor I like those monitors those are
like set it's basically a newer 7,000
Monitor and I'm I hit this switch
earlier the switch on the top and I
noticed the light comes on they've got
the
light wired
separately and now I've got a
ram
4L on the
monitor let's see if that turns off when
I hit the switch
y yeah they've got their
Monitor and the coin
lights wired
separately I bet they've got the
uh they must have the power supply
straight
wired to the
AC
yep seen it a thousand
times that's the AC for the
power they've just got it spliced
in to where it's constantly on anytime
it's plugged
in
Okay so we've got a ram
4L before I start chasing my tail on the
ram
4L I'm going to check the
power power supply power supply blah
powers of
blah let's
[Applause]
see Galaga likes a lot of
power gag is a power hog
we'll see what it's got I don't knock
everything over behind
me
4.8 that's good that means it's
low maybe it'll come back to
life so I'm going to turn that knob
right there let me get this situated a
little bit better
all right we need to turn it up quite a
bit last Gall I had it wouldn't even
work right until it's was at like 5.4
all right so I adjusted it now we're
going to reset
it we've got to unplug it to reset it
though because they've got it straight
wired come over
here
unplug plug back in without
electrocuting
myself come on baby
this is normal this is like a boot up
sequence wham bam it's almost like I've
done that
before I think my last Galaga was the
exact same
problem does anybody remember what that
hippie said power supply power supply
power
supply but it's making weird noises so
we're not out of the woods yet
let's see what the sounds
[Music]
like he's right there's no
sound I don't know why you guys were
doubting this
well the explosion sounds
working well that pretty much tells us
it's a board problem because we must be
getting we must be getting the voltage
the5 and the 12
I don't really like working on original
G boards they're just getting so ficky
anymore but got to do what I got to
do all right so we're going to unplug it
take the board out and we're going to
clean all the leg the legs on all the
ROMs that's the first step
all right I got the board out of the
cabinet so I'm going to
carefully take each one of these chips
out of these
sockets clean all the little legs with
the little file gently
gently then I'm going to put them all
back
in see how those legs are all
black so those are custom
chips from
Midway and you got to be super careful
with them because you can't really get
them
anymore the legs are really
brittle and you can break some of the
legs right off those
things and that's part of the reason
Galaga likes so much power because it
takes a little bit more juice to get
through all those dirty legs on all of
these
chips so I'm I'm thinking it's a bad
connection on some of the ROMs or it
could possibly
be bad caps right here but since we have
the uh the explosion
sound I'm kind of thinking it might be
one of the
ROMs so I'm going to do that first and
we'll see where that gets
us well cleaning the ROMs did not fix it
but I didn't notice this
earlier whenever you add a credit on it
it makes like it knows it's supposed to
be making a
sound you hear
that so there's like a static every time
I put a credit on it and I noticed
whenever I hit the fire button it did
the same
thing like it knows it's supposed to be
making a sound right now
here
it so now I'm back to my cap Theory so
I'm going to change the caps on the
board and we'll see what that does well
I cleaned all the chips got everything
back in there and it was the same thing
no
sound other than the
explosion so I decided before I went too
much further I should just Google it so
I Googled it and everybody seems to
think it's Chip
[Music]
5c so I decided I would just take 5c
out and it appears to do the exact same
thing and I don't even have this chip in
there which leads me to believe that
this chip is
broke unfortunately I don't have this
chip I don't
think I'm going to have to order that
and that's going to probably take a week
to get
here
so I guess I'll be back when I get that
chip all right I was going to order
another
chip but then Ronnie came in and told me
I could steal one off a digdug
board and I had a parts digdug
board this one's got a bunch of corros
and stuff on
it and
apparently what is this 10 a 10 a is
supposed to be the same as 5C on a
Galaga because you know Namco made both
of them so I'm going to go try it see
what
happens okay I'm G to show you why you
can use the chip out of a digdug to fix
the Gallia or to to troubleshoot the
Gallia is really what we're doing this
is the audio section of Galaga not the
explosion sound they do differently but
the just the digital sounds I guess you
would call it and I don't completely
understand how it works but there's a
prom down here 5c that's the one that uh
Joey suspected and this is a uh Sound
State prom I think that's what they call
it so basically this prom is turning on
these other
chips basically and if you look it's got
the clock signals coming in uh pin 2 3 4
five six and seven they're on the left
and then it's got two data signals
coming out or four data signals coming
out 9 10 11 and 12 they're all tied into
a pullup resistor and then each
one goes to one of these chips so
there's a 7489 which is a ram there's a
283 there's a
174 and then the last one goes over here
to this 273 over here see it's the clock
lines that this chip is running so it's
basically turning on everything in this
section as the sound flows through or
the sound signals flow through
um these are two two RAM chips
7489 this is a prom I guess that has
data for like what sounds they're
supposed to play or what um frequency
the sound is or whatever and then it
goes over here through these I think
these are switches and it goes to be
Amplified so if you look at
digdug it's the exact same setup because
Nam made it so this is that same exact
chip if you look it's
got the um clock signals on 2 3 4 5 6
7 right and then it's got four data
outputs that are have a 1K resistor pull
it up pull up on it and then those four
are being used to turn on the
ram
um the 174 I think think I'm trying to
follow I think that's
right
um the 273 and where is the other
one I'm looking for the other one here
the one the
174
the
273 the oh it also runs in the clear on
the
174 and the ram so it's it's the same
setup there's two Rams these the prom
with the sound frequencies or whatever
it is in it this uh here's the switches
it's just the exact literally the exact
same setup this chip here may be
different though that's got the I I'm
calling it The frequencies that's just
how my mind understands that I'm not a a
software engineer or anything or
Hardware engineer but um you're getting
data here
into the ram that's what creates your
sound you're getting data here into the
ram that's what creates your sound it's
the exact same setup they didn't
reinvent the boat or the the the wheel
they didn't reinvent the wheel they just
use the same thing so since this one is
just turning stuff on and off that's got
a little tiny code in it where they made
that chip do exactly what they want and
they use that same chip in
bosconian um um digdug Galaga I don't
know if it's in pole position but it's
in several of the the games that Namco
designed so even though Atari made the
the digdug
PCB and Midway made the Galaga PCB they
used the same code in that one little
chip we just got
lucky all right I put the chip back in
the
board and also mov the power supply
wires to the bottom of the isolation
Transformer I like to do it before it
goes in the Transformer that way it
doesn't affect the monitor so now we can
turn the game on with the switch like
we're supposed
to we'll see if that fixed our sound
[Music]
that seems to have done
[Music]
it so now I'm going to take this bezel
off and clean all that it's really
dirty and I'm going to adjust the
monitor a little bit too the contrast is
up a little too high looks
like all right so I'm going to take the
control panel off take the bezel off and
clean everything with Windex commercial
grade I'm also going to change this
button to a red one and the Cherry
switch originally this would had a leaf
switch like that there but somebody's
has already swapped it but it it just
doesn't doesn't work very good so I'm
going to put another one in there
[Music]
I don't know if you can make that out on
camera but it's got a big it's very
dirty got a a lot of haze on it dirt
monitor needs more green
too I don't know if you can tell but the
ship's kind of
purple blue and red make purple needs
more green
we'll worry about that in a minute
[Music]
all right we got to add some green and
maybe play with the brightness a little
bit and the
contrast f my
mirror it's too much
got pretty good on the
focus the contrast is up too high that's
why it's bleeding
I think we need some green little green
to make it
brighter
get all the brightness is kind of in
your
green so if your Green's low the whole
picture will look
dark
see do
anything no
you
no okay that's doing
something that's your red go
back
okay sa you're red go
back
okay can't tell oh that's your green a
little bit more that's all I got on that
one
okay okay go
back
more um just a little bit
more okay that's about all you got on
that wait should I mess with the blue at
all um yeah might as
well okay go
back all
right okay go
back all
right now turn the you're going to have
to turn the brightness down just SL let
me turn off the lights so we can see the
how the
yeah turn down your brightness just just
a little
bit whoa all right now turn your focus
just a little
bit go back the other
way okay back
okay back just
slightly that it no you keep
going okay the other way you're right on
it then it moves whenever you let go of
it keep going
back yeah whoa
yeah when you let go it changes other
way all
right pretty good this the gals a little
bit at the bottom but yeah the focus
ain't great tubes tubes dying on you a
little bit it's only been 40 years y yep
apparently you can't get 50 years out of
one they just don't make nothing anymore
that's good Midway
half well I'm going to um I'm going to
change that button and then we'll try it
all
out but yeah the focus ain't all that
great but I don't think the guy's going
to want to pay for another
tube Ronnie's going to try see if he can
get it
better I can reach it without getting
Electro killed
my hands on the
knob that's better in it yep a little
bit
better that's passable there I mean
that's fine if it CH if it fits it chips
you see how he did me he was back there
telling me where to turn it and then he
made it where I got it all focused then
he said well I get in there and do it
better anyway going to change the button
and try it out look at this crap you
can't just change the button like any
other game they soldered the wires onto
the
switch they didn't put the little uh
connectors on there like a normal person
would so now I'm going to I'm going to
put the connectors on there all right
the guy also wants it on free
play and to do that you have to change
the dip switch settings you have to look
in the manual to get the right settings
but depending on how you have all these
set they do different things
and Ronnie just looked it up in the
manual and he says
6K one two three need to be on for free
play
one
two three the rest of them have um the
rest of them do things you know how many
ships and difficulty and all that that
type of stuff but we're just going to
put it on free play and leave everything
else now we're going to put it back in
and we'll play a game and see how
everything's
working all right we got it on free play
here we go
[Music]
[Music]
how pathetic didn't even beat the first
board I prefer the rapid fire
a
[Music]
[Laughter]
[Music]
[Music]
oh
once you get used to that rapid fire
it's hard to go back to
this smashing the button time
[Applause]
a
[Music]
[Music]
[Music]
oh come on I got distracted
[Music]
[Applause]
[Music]
a a
[Music]
[Music]
a
[Music]
a oh
[Music]
oh
[Music]
[Applause]
a
[Music]
[Applause]
[Music]
[Laughter]
[Music]
[Music]
well there it is
[Music]
works pretty
[Music]
good the light working I think I'll be
real happy with
it got my button
swapped it's in pretty good shape
really well that's going to do it for
this one thanks everybody for watching
and we'll see you on the next one