Laser Bed Jig: MASSIVE Time Saver!

Kim and Garrett make it
277 followers
We reveal a massive time-saving laser bed jig. Utilizing quarter-inch MDF, we've optimized our process in Lightburn. Learn how aligning to the bottom left and cutting out a square simplifies material placement, saving valuable time and effort in every project. This strategy ensures designs perfectly fit your material! #kandgmakeit #LaserEngraving #LaserCutting #Lightburn #LaserBed #DIYProjects #WoodworkingTips #TimeSavingHacks #Crafting #LaserTips #Engraving
I mean it really is that easy. A big time saver, one of my biggest time savers, build yourself a
jig. So what we did is we took our laser bed, we laid a giant sheet of material in there,
we used quarter inch MDF, we laid it in the laser bed, we aligned it all the way left
and all the way bottom. Then we came into light burn and we drew us a square that was the entire
size of our laser bed. And I want to line everything up to the bottom left in my bed.
So once this was selected, I then came up here and I said move to lower left. This will move this
to the lower left of my bed. Then I cut this out. Now anytime I bring material in or a new design in,
I know how big my my material is. If I just laid a sheet of MDF in there and it's 36 by 48,
I know that I can come out to 48 inches wide on my design and as well I can come out to 47 point
whatever inches on my design. And as long as I have it down here in the corner, I really don't
need to frame it. I know it's going to land on my material. That saves me so much time.
I don't have to spend any time framing this or moving the head. I know where my material is,
how big it is. I know it's in the bottom left hand corner. I know my design will fit on the material.
And go. Saved me so much time.
