We turned a boring studio wall into a GIANT custom map of Richmond, VA using just our desktop laser, Laser Map Maker software, and LightBurn. You can too! 🎯
In this video, we walk you through step-by-step how to design, tile, prep, cut, paint, and install large-scale laser-cut map art. Whether you're decorating your studio or looking for a new product to sell (B2B, anyone?), this map project is crazy customizable and surprisingly simple.
🔹 Learn how to:
Use Laser Map Maker to create a 9-tile 5ft x 5ft wall map
Prep your vector files for LightBurn or xTool Creative Space
Tile large artwork for desktop lasers
Cut multiple layers for land, water, and roads
Assemble and paint your wall panels
Add UV-printed local landmarks for a 3D pop!
💡 You’ll also get tips on scaling this down for ornaments, signage, and even B2B gifts for local restaurants and businesses.
FYI: We are not professionals, and we don’t claim to be. This is what we found worked for our project. Yours may need a little different approach. We have just enough woodworking skill to make some basic furniture. Safety first!
FTC Disclaimer: This is not a sponsored video. All opinions are genuinely our own. This post may contain affiliate links and we earn a small commission if you make a purchase after clicking on my links. It doesn't cost you any extra. Thank you for your continued support to keep Making It!
We just turned this blank wall in our
studio into this. With just a couple of
clicks and clacks, we have ourselves a
giant map. And we'll show you how we did
it right now.
[Music]
Heck, do you like to do a build or make
it? So do we. Today we're making some
wall art. It's going to be a giant map
of Richmond and we're going to put it up
in our studio. This is something that we
wanted to get done before the jamboree,
but we ran out of time, so we get to do
it today. It's going to be big and it's
going to be pretty easy. We're going to
use laser mapmaker software to create
ourselves a 5 foot x 5 foot 9 panel map
wall art. We'll be using the tiling
feature within the laser mat maker
software. So you can take a map, break
it up, make it big, and put it into
different size panels so that you can
cut this on your desktop laser. So you
can make a wall art panel like we're
doing using just the desktop laser.
We'll be using our Eon Nova 14 today and
our panels will be 16 by 16 because I've
got a pretty large wall. But you can
make a large wall panel just like this
using only a desktop laser. I mean, Kim
wants to go big, so who am I to stop
her? This is going to be super easy.
With just a couple of clicks and a
couple of clacks in the Laser Mapmaker
software, we got ourselves some maps. We
can jump right in and show you just how
easy it is.
Step one, we're going to map out our
map. We're going to jump into Laser
Mapmaker software, and Kim is going to
show you just how easy it is to find
your place in the world. Here we are in
the laser map maker software. We're
going to start with a new project and we
are going to call this
RVA 9 tile wall art.
Now we have a choice. We could start
with the starter template or a blank
template. The blank template, there are
a lot more settings you have to choose.
The starter template is a great place to
start. It gives you your basics and
that's really all that we'll need for
this project. This starts you with a
land layer cut, a land layer engrave,
and a roads layer cut. And that's really
all that we need for this layered map
wall art that we're doing. Next thing
we're going to do is choose our
location. You can put in your
coordinates. We're just going to type in
Richmond,
Virginia.
And here we are super zoomed in. That is
the state capital of Virginia. really
close view, but we're going to zoom out
a little bit here.
And about right there is what we want.
The fan is a big part of downtown
Richmond. So, you want to show that fan.
It really goes out far. Isn't that
pretty cool? But we want to zoom in a
little bit because I do want to be able
to see some of these roads. That's what
the downtown roads look like. And then
we want to split the river. I want the
city to kind of be here in the center
blocks, the river down below, and then
there's some other areas up here that we
want. So, I think this is the view that
I want now because we are going to
create nine tiles and each of those are
going to have a border. We do not want a
border at this point in the project.
Otherwise, it's going to add a border on
top of this this outside border after it
splits it into nine. So, we want to
remove this border and add the border
later. To do that, we're going to click
the three dots, go to settings, down
here to border, and change it to zero.
And we want to do that for all three of
these layers.
All right, we've removed our border. And
that's really all that we need to do.
There are some other cool features in
here. You can put your map into a shape.
You can put your map into the look of a
of a state. So, we could put it in
Virginia, but that's not what we're
doing. So, we're going back to the
square rectangle, and we're going to
preview our export. Now, as you can see
here, you do have to have to keep your
browser focused on this tab. I have
tried to move off this tab several times
in preparation for filming this, so had
to learn to be patient.
Now we have our three layers as you can
see down here at the bottom. You can
look at them individually and you can
look at them as a combined view which is
how we were on the previous screen. Now
as we talked about this is the land
layer cut. We do want it vector. We do
want it outline and we want an SVG for
the engrave land layer engrave layer.
This is the secondary roads. We do want
it vector. We want it fill and we want
SVG. And then for the roads, we do want
it vector outline SVG. So that looks
good. The next thing we're going to do
is go to the tiling tab. We're going to
enable tiling. Now it comes in default
3x3, which is perfect. That's what we're
going to keep it at. And see here, it's
automatically added a border for us. And
this is what we where we want the
border. Otherwise, the outside border
would still be there, and we don't want
that. So, like I said, three columns,
three rows. The spacing is fine. We're
going to mess with it a little bit in
LightBurn, so I'm going to leave the
spacing so I can group them
individually. And then the border width
here. Now, this border width is coming
in at 20 pixels. Now, that is at about a
third of an inch. Now these what we have
learned is when this exports currently
it will export each of these at about 5
in but we want ours to be at 16 in. So
we know that once we get this into
LightBurn we're going to scale this up
by three * 3. So I know that if I want
my border to be an inch then a third of
an inch right now times three will get
me at about 1 inch border. because as
you scale your nine boxes, your border
size will scale as well and become
thicker. So, I'm going to leave this at
20 pixels. I'm also going to change the
border color here. And because we're
moving this into LightBurn and we know
we want to cut this, I'm just going to
go ahead and set it to red. The engrave
layer, I'm not going to give it a
border. I'm going to leave it white. And
then for the roads layer, I'm going to
give it a red border. So you can use the
dropper tool and say pick up this color.
So it's 255 0. And now I can update my
preview.
And you can see I have the red border on
the land layer and the roads layer, but
the engrave layer has a white border or
no border. So I'm going to click export.
All of my settings are as we set them
before.
This will be three credits and export.
Super easy.
Now, once it exports, it will have to
process for
less than a minute. It really doesn't
take much time. And while this is
processing, a couple of tips here. Since
I'm going to be bringing this into
LightBurn, I'm going to download the zip
file that has all three layers. But if I
were bringing this into XTools Creative
Space and I were going to cut this on a
smaller laser, Creative Space will try
to bring in the zip file and the three
layers stacked on top of each other. So
I would recommend if exporting and using
Creative Space to download them
individually, but since we're using
LightBurn, we're going to say download
zip output.
Step two, it's time to prep our map.
We're gonna do this in LightBurn and
that's the only other software we're
using. Laser Matmaker and LightBurn.
Now, you can use Creative Space though.
I didn't want to leave this segment
without letting you know. You can import
this into Creative Space and again use
your desktop laser if you're using the
P2 or something like that. Fun fact,
Laser Mapmaker is actually built into
Xtool Creative Space. Actually, it gets
announced this day this video goes live.
Oh, well, you're in the know. Inside
LightBurn, we're going to prep our file,
get it ready to cut and engrave. First,
I'm going to drag my land layer engrave
in. Check it out. Looks okay. Looks
pretty solid. It's only one layer, so I
know there's nothing funky going on.
We'll set this guy aside. Have a seat
over here, sir. Now, we're going to drag
in my land layer. Cut.
And then this is needs some massaging.
It's got some things that we don't need.
Like, I don't need to cut the inside of
my frame. everything is just going to
fall out then. So, we're going to get
rid of the inside of the frame. And then
I got these little weird connector
pieces. We'll get rid of those also. So,
I know my cut layer is red. And I'm
pretty sure that's the outside layer
here. So, we're going to hide red.
And then down here, it looks like my
layer 17. If I right click, it'll blink.
Layer 17 is my water. Layer 15 is also
water. So, we're going to hide these
water pieces. Hide.
And now I don't need these guys anymore
because this is the inside and that's
the connectors. Let's grab these.
Make sure we are ungrouped before I
delete them all. Right now, let's grab
these again. Delete. Let's bring back 15
and 17. Right. These are my water
layers. If I right click, they'll blink.
I want to put these all on one layer,
right? So, I'm just going to select them
all. Make sure we got everything or put
them all on the blue layer. This is
going to be my score layer, but I'm also
going to use it as a cut layer. Let's
bring back the red layer. And we'll
start to group these things. So, I'm
going to use these backers here or this
land layer. This land layer is going to
be my backers and it's also going to be
my land layer. So, this is going to be
where my water is.
So, when I do my water piece, I'm going
to cut out the frame, but I'm going to
score where the water pieces are. That
way, I know how to put everything back
together.
And there's a bunch of little islands
that we have to line up down here. So,
I'm going to score it. And then next
time I come back in, I'm going to set
that blue layer to
cut. Let's group everything. And while
that's selected, I'm going to grab this
guy. And we're hit this bullseye. The
bullseye will align it middle and
center.
All right, fellas.
You guys are buddies. Hang out there for
a minute. I'm going to work on the
roads. I'm going to go back out. Going
to grab my road layer. Cut. This is also
going to need some massaging.
Right. So, for this guy, let's hide my
red layer.
All right. It's got a frame on the
inside, too.
Let's right click this guy. Beep beep
beep. All right. We don't need these
guys. If I right click on C10, you see
these blink. I don't want those cuz I
want the roads connected to the frame.
So, let's hide this black layer.
Now, all these little junk pieces are
left. Let's make sure everything's
ungrouped and we'll delete them.
We'll bring back the red layer and the
black layer.
I have to get rid of these little
connectors here.
Since they're set on the black layer,
they didn't show up when I was trying to
delete everything.
So,
we'll delete all these little
connectors. We'll grab all these guys.
We'll put them all on the red layer.
This is all going to be cut. And let's
do some house cleaning. Just group these
together. I'm going to move them around
later. And I don't want any of the roads
to get messed up or get funky. So,
I'm just going to group everything.
That way, when I go to try to move them
around and save material,
I don't accidentally lose a whole
highway. All right. Now, these all are
ready to go, but they're still a little
tiny.
This guy is 4 and a3 inch. Kim's looking
for 16 in. I've already done the math,
so I'm going to grab everything. Let's
just control A to make sure I got it all
right. All right. And then I'm going to
come up here to the height. And for the
height, I'm going to say space times
3.677.
I've already done the math.
And let's see what we got. All right. 16
in. I mean, it's 16 and a little bit of
change, but that'll get shaved off with
the laser. I think we're ready to go.
Now, what's going to happen is when I go
to cut my backer, I'm going to turn off
or turn off the output for my engrave.
I'm going to cut these out. I'm going to
score for the water so I'll know where
to put the islands back in. And then I'm
going to come back in for my next cut.
I'm going to do the engrave. I'm going
to do the cut of the frame. And then the
blue is going to turn into a cut also.
Step three, we're going to make all of
our cuts. We're going to use our Eon
Nova 14 to make all of these cuts
because I want to do a couple of panels
at the same time. So, we're going to use
some 8 inch MDF for the backer. That's
going to be the water. Mhm. Then, we're
going to use some 8 inch birch. That's
going to be the engrave and the land.
That's to give it a little color
contrast. Then, we're gonna use some
quarter inch MDF for the roads. Kind of
give it that that depth feel. make it
cast some shadows. So, this first cut is
going to be our backers. So, let's move
this stuff over here.
We'll group these together a little
tighter. Actually, let's ungroup
everything.
Ungroup everything.
And I'm going to regroup these guys. And
we're going to shift some stuff around.
[Music]
So, if I'm sliding them together and I
hold shift, they'll stay on the axis.
so I don't get all wobbly and wonky and
misaligned so I can move all these guys
together. I'll hold shift.
[Music]
All right, we'll grab these guys first.
We'll bring them down.
I want to do engrave and then I want to
do score and then I want to do cut.
But for my score I wanted what? 200 225
53
Yes. So that's my engrave. All right. My
score I know I want like 200
200 and then 25 is my score. 25
and I know my cut is going to be 10 and
50.
So, this first go around, I'm going to
hide the output of the engrave,
and I'm going to score this blue part
and cut the red part.
[Music]
All the backers are cut out. Now it's
time to do the the road layer or the
land layer with the water inside. So now
I'm just going to come back. I'm going
to unhide the output for the engrave.
And now for my strokes I'm going to come
back and make this 10
and 50.
Oops. 10 and 50 to match my cut layer.
So this is the middle layer. Yep. This
is the middle layer.
This is above the water but below these
highway roads. All right. So, let's grab
this and we'll cut this out.
[Music]
All right, we're back in Lightburn for
one more cut. We are done with the
backers and the land.
Let's move these guys out of the way and
we'll bring in the roads.
I'm going to get some u more material
out of my more space out of my material.
Right now, I don't need to adjust
anything.
It's the same cut. I'm just going to
come back in and cut my roads now.
[Music]
Step four,
time to paint and assemble. We have all
27 pieces cut out. Each piece of the
engrave probably took about 45 minutes.
And we saved almost half that time just
by cutting the engrave down to 100 lines
per inch. That's right. It makes it
maybe just a slight bit lighter than the
deeper engrave. But for our purposes, I
think that it's still a strong contrast
within the 8 inch birch. And I think it
was so worth it to save 45 minutes on
each board. Definitely. I think so. So
you won't even notice once we're done.
So here's the 8 in MDF. We're going to
paint these pieces where we're able to
see the water. We're going to paint the
water areas blue. I scored it so we'll
know we don't have to waste paint.
Here's our birch piece. I think we're
going to leave this roll. Maybe give it
a quick sand. I think we're going to
maybe spray it with a little clear coat.
Okay, each one of them. Just a quick
spray with clear coat. I don't want to
leave it too raw. And our quarter inch
layer we're just going to paint black.
I'm just going to roll it with some
black paint. Super quick, super easy.
[Music]
[Applause]
Step five, time to install the wall.
We're just going to use some command
strips. We put two on each. And we're
just going to stick them to the wall.
That's it. That's it.
[Music]
Step six. Now we have the accents. The
walls looking beautiful, but we're going
to add some landmark locations using our
logo jet 90R and print some of the our
famous locations around Richmond. Then
we'll throw it back into the Eon to do a
cut of our UV print.
[Music]
We have our landmarks all printed and
cut out. Now we're just going to stick
them to the map using some of these foam
little sticky things. Little pop dot
glue dots.
[Music]
What do you think? It came out great. A
little bit bigger than I had in my head,
but bigger is always better in my book.
And I definitely like all these little
uh popped out landmarks. They're super
cute. Yes, the laser map maker software
made this so easy. It made a huge map, a
statement piece. Well, I mean, what did
it take? Like a total of 13 minutes to
get it prepped and start cutting. And I
I think the engrave piece took the
longest time
and I think that was just the bottleneck
in this project. But otherwise, I think
it was great. Shrink these down to 12in
panels and you can easily do this inside
a desktop laser. The other great thing
is that you can do all kinds of shapes.
So, not only can you tile your map like
we've done here, you can do this on a
much smaller scale and tile it for uh
just a simple wall art. You can also do
states. There's so many different cool
features now with the laser matmaker
software. Well, we're about out of time.
So, a big thanks to the Make It Mafia.
We love you guys. That is the best way
to support this channel. And we'll have
more about doing maps over there. cuz I
I definitely want to do a lot more of
these maps. I think we should do some
ornament maps. I definitely want to do a
state shape ornament map. Well, I think
these would be great for B2B sales.
Offer this for restaurants in the local
area. I think these would be awesome.
That would be great. All right, I'm out
of time. I got to go start my next map.
Was that dumb?
That's what your board says. Oh, is it?
Uh-huh.
Didn't I didn't even know.
We're using some foam pop dots to secure
our little uh monuments and stuff. Can
you see it? We're just going to stick
them on. Nope. Stop and do that again.
We have our monuments all printed and
cut out. Landmarks.
What did I say? Monument.
We have our monuments. Landmarks. Okay.
Okay.