The xTool Apparel Printer Plus is here, but this upgrade isn’t really about better-looking prints. It’s about something that matters a whole lot more if you’re running a business: reliability.
We learned that lesson the hard way.
In the middle of craft show season, we accepted a rush order for a batch of shirts and thought we could knock them out in no time. Instead, low humidity caused print problems, clogged heads, wasted ink, wasted film, and an entire weekend of troubleshooting.
Then we learned another painful DTF lesson: let the printer sit too long and you may have a whole different mess waiting for you when you come back.
So when xTool told us what they changed with the new xTool Apparel Printer Plus, they had our attention.
In this video, we look at the three AP Plus upgrades that directly address some of our biggest frustrations with DTF printing:
• Automatic Humidity Control – Dual humidity sensors and a built-in humidifier automatically maintain an internal humidity level of approximately 45%–65%.
• Advanced Wet Capping + Upgraded Ink Dampers – Designed to keep the printhead moist for more than 30 days. According to xTool, during 10 days of standby this can reduce moisturizing fluid consumption by up to 75% and ink consumption by approximately 80%.
• 24/7 SmartCycle Maintenance – Automatically manages wet capping, white ink circulation, printhead cleaning, moisturizing fluid replenishment, humidity monitoring, and more.
You can also monitor the printer through the xTool app and receive real-time information about ink levels, maintenance status, and printer issues.
And if you already own the original xTool Apparel Printer, there’s good news: xTool is offering existing owners a free upgrade kit that brings several of these improvements to the original machine.
We also break down what DTF printing actually is and how it compares with screen printing, DTG, and sublimation.
For us, the AP Plus story isn’t about dramatically changing what comes OUT of the printer. It’s about making the machine more stable, easier to maintain, and more dependable when you need it to make money.
💥 JOIN THE MAKE IT MAFIA Get premium production-ready SVG files, business training, member discounts, behind-the-scenes content, community support and more: https://kandgmakeit.com
FYI: We are not professionals, and we don’t claim to be. This is what we found worked for our project. Yours may need a little different approach. We have just enough woodworking skill to make some basic furniture. Safety first!
FTC Disclaimer: This is not a sponsored video. All opinions are genuinely our own. This post may contain affiliate links and we earn a small commission if you make a purchase after clicking on my links. It doesn't cost you any extra. Thank you for your continued support to keep Making It!
AI Generated·May contain errors
Video Summary
AI Generated
The video discusses the challenges of maintaining DTF (Direct to Film) printers, specifically regarding humidity and ink clogging. The speakers share their personal struggles with machine downtime and introduce the xTool Apparel Printer Plus as a solution that automates maintenance to ensure business reliability.
You can make $15, $20 profit on a T-shirt, $20, $30 profit on a hoodie, but there's one
number no one ever talks about when buying a printer.
It's what it costs when it isn't printing.
Because the most expensive printer in your shop isn't the one that costs the most.
It's the one that's down when you have 100 T-shirts due tomorrow.
What is up?
Welcome back.
We know you love to do it, build it, and make it.
And we're here to help you sell it.
We partner with our buddy next door sometimes.
He's a large screen printer.
He doesn't really take any jobs less than $100.
So sometimes he'll throw us his scraps, his $25 and $50 T-shirts.
He knows we have a DTF printer, and he doesn't even think it's worth it to go ahead and create
screens unless it's $100 or more.
So he throws us his scraps now and then.
At last November, middle of the crash show season, we have wagons everywhere.
It's kind of crazy.
We have extra painters in here painting the signs.
He comes over like a Thursday.
He's like, hey, I have a rush order, $25, $50 T-shirts.
Can you guys pump those out for me?
Would you be able to do it?
Yeah.
And give them to me on Monday.
We're like, yeah.
Yeah, bud.
No problem.
We got you.
No problem.
Kim's like, I'll just knock them out on Friday.
No problem.
Mm-hmm.
Friday mid-afternoon, we get around to it, and they're all fuzzy.
Every print's fuzzy.
Saturday morning, we come back to it.
Everything's fuzzy.
The head's getting clogged up, or the ink's gathering on the heads.
Needless to say, we spent all weekend wasting ink, wasting paper, and wasting a ton of time
doing research.
Come to find out, it's the humidity.
Since it dropped below freezing, the humidity in this place got down to 27, and none of
the printers seem to want to do their thing.
If you have any experience with printers, UV printers, DTF printers, you know they're
very sensitive to the humidity in the environment.
So it's got to have enough moisture that everything, the ink flows appropriately and like it's
supposed to.
Now, we did not even consider, it just didn't even dawn on us, I mean we kind of know the
humidity thing.
At that time, we knew.
I mean, I read it on Saturday.
It was like, could be humidity.
And I was like, nah.
Nah.
Humidity.
Not here.
I mean.
This guy on Reddit thinks it's humidity.
This room is climate controlled.
We're good.
Well, that's not the case.
When the temperature drops, humidity drops, and it becomes a problem.
And that was a learning curve for us.
So we ended up getting a gauge and a humidifier.
Yep.
So we can monitor the humidity and keep the printer running.
Another lesson that we learned was you can't let the printer sit that long.
So everything dies like December 15th here, it pretty much dries up.
And then like mid-January, we start getting orders again.
And we get an order for another 25 t-shirts.
I pop over the printer.
I make sure it's nice and humid.
I was running like a good 45% humidity in the room and nothing's printing.
I can't get white to come through the head.
I'm doing cleaning after cleaning.
Finally, we had to basically take it apart and pull, hook up a little syringe to the,
I guess all the tubes, and pull all the white ink that basically solidified in the tubes.
And then we had to flush the head.
And then from there, we just basically learned that it needs daily maintenance.
So now every day we come in and we do a head cleaning and we run a print.
So we have lots of logos and we can make a t-shirt at any time because every day we print
one of our logos.
Right.
If you've seen Kim and Garret t-shirts in our store, guess what?
We got you next day shipping because I've got tons of DTF prints with our logo on it.
We had to keep the heads going.
We had to keep them lubed.
And when we go away for like a week or whatever, we'll tell Tanner, hey, go, go throw a print
at the, the apparel printer real quick.
So the heads don't dry out.
So let me explain a little bit more about DTF.
DTF is direct to film.
So you could think of this as kind of like a special t-shirt sticker.
So the way this works with a DTF printer is it prints the ink and then it prints glue
on the back and then you have to heat that glue and then you have a special transfer
like this that can be stored and used when you're ready.
And then you will take this transfer and actually apply it to a t-shirt like what we have on
here today.
These are both DTF t-shirts.
Well, it becomes a heat transfer.
Yes.
And so let me explain a little bit, the various printing technologies that are out there.
So there's screen printing, like we talked about with our neighbor next door.
He actually uses a screen, runs the ink through a screen and each color is a different screen.
So there is a larger process to that because each color in your image is, requires a screen
setup.
So that's a little bit different than a full color print like a DTF printer.
DTG is direct to garment.
So what's different about DTG is that you have to print directly on a garment.
So what works a little bit better with DTF is that you can take this transfer and actually
put it on anything.
I could put it on a hat.
If I have a t-shirt press, a hat press, I could put it on a camp chair.
We did put it on a camp chair once.
You could put it on any various shaped things, as long as you can apply heat to it, it will
transfer to that fabric or it can be cotton, polyester, vinyl, it can transfer to almost
any kind of material.
And then what makes it different than sublimation is sublimation requires you to have a light
colored fabric and it must be a polyester type fabric so that the gases blend with the
materials of the fabric.
You don't need that for DTF, direct to film.
These transfers will apply, like I said, to cotton, polyester, canvas, wood, we've actually
applied them to wood, to metals.
They really do transfer to almost anything because of the glue that's applied to the
back.
So I wanted to explain a little bit about the technology that we're talking about.
When Extool approached us about sending us the new Apparel Printer Plus, my initial reaction
was like, no, I don't have time to babysit another machine.
But they reached out and shared some of the new features of the Apparel Printer Plus and
it really did hit the three biggest pain points that we had.
So I had to do a little convincing and I talked Garrett into saying, yes, we want this new
printer and I really want to try it out and I want to see if it can meet our commercial
needs.
Can we actually produce products that I can use in my business?
We had gotten to the point where we had to take DTF prints out of our store because it
just didn't feel reliable enough of a customer order.
I needed to be able to get those prints printed and shipped within a day or two.
And I wasn't confident that I could do that.
So with the new AP Plus, Extool hit us with solutions to our three main pain points.
One, more stable performance.
Two, better routine maintenance.
And three, smart cycle.
What actually happens when you become a Maker Place member?
First, you get instant access to our monthly library of premium, production-ready SVG cut
files worth over double the subscription cost.
Just download, load into your laser software, and start cutting sellable designs in minutes.
Plus, you unlock access to our Make It Mafia community, where you get behind-the-scenes
content, topic submissions, and direct support.
Add in site-wide discounts on materials and exclusive business training webinars and it
pays for itself.
Membership starts at just $5 a month.
Tap the link to join the family today at kngmakeit.com.
Remember the problem with the humidity that we had and we had to get a sensor and a whole
separate humidifier?
It now has dual humidity sensors with an automatic on-board humidifier.
It maintains a consistent 45-65% humidity and it auto-adjusts the humidity inside the
printer.
You don't have to touch it.
It's automatically going to adjust the humidity inside the printer based on its sensor readings.
And that keeps the print head from drying out and reduces the ink clogs in the lines
so you don't have to pull that ink through the lines when it sits.
Remember the issue we had when we let the printer sit pretty much all of December and
January and then when we decided to print, everything was clogged, the print head and
all the hoses?
Well, X-Tools has gone ahead and tried to solve that issue too.
Yes, the AP Plus has an advanced maintenance system.
So they have new advanced wet capping and upgraded ink dampers, which will allow your
print head to stay moist for 30 days.
And that's huge.
So they give us a little statistics saying that if it's sitting 10 days in standby mode,
that is now reducing the use of the maintenance fluid by 75% and the actual ink usage by 80%.
So overall, you're saving on inks and you're saving on the maintenance costs, which is
pretty exciting because now I feel comfortable leaving it sit.
If I go on vacation and I come back, I'm not stressed that I have to have somebody run
a print while we're out of the office.
And if we don't have a job for 30 days, the machine can actually sit there and I'm confident
that it's actually going to have a moist print head and the lines aren't going to be clogged
when we come back to it.
We won't have a hundred t-shirt designs to send over.
We'll have to run a Kim and Garrett make a t-shirt design every day so that my print
head keeps running.
And actually I run two at a time.
So again, if you want to Kim and Garrett make a t-shirt, just let me know.
And my biggest pain point was all of the babysitting.
I mean, how many logos do I need?
And I always had a syringe at the ready.
With the new AP+, they now have a 24-7 smart cycle maintenance system, which does all of
the maintenance and monitoring for you.
So it's doing, it's managing the humidity data for you, usage info.
It's letting you know real time, what kind of ink levels that you have.
It does the automated wet capping, ink circulation, the automated cleanings, the moisture fluid
replenishment, all of that in an automated smart cycle process.
And you can monitor all of that using the X-Tool app on your phone.
So as long as you're in the same network, it will let you know, Hey, your ink levels
are low or any kind of issue that it runs into.
You're going to get real time notifications.
If there's an issue with your print anywhere in your, in our building, we can kind of keep
an eye on what's happening with our prints, which is great.
If you're running, running a hundred prints, you go do something else and you come back
and you realize, Oh, it jammed after print number three and you waited 30 minutes and
you didn't even know that.
I mean, ask me how I know.
Now if you're thinking, great, I just bought the printer six months ago.
Now they want me to buy a new printer.
Don't worry.
Don't worry if you're one of the OGs, they got you.
They're not going to leave you hanging.
They have a free upgrade kit for you.
With this new upgrade kit, you actually get the onboard humidifier and upgraded dampers.
Now with the onboard humidifier, it will adjust the humidity inside the printer and keep it
at that optimal 45 to 65% humidity.
Now what it doesn't do with the AP plus, it's integrated in and it's using that smart cycle
maintenance to monitor it for you, but for the OG users, you will have to keep an eye
on the humidity in the room, but you won't have to buy a separate humidifier.
They'll automatically produce that humidity by turning it on and running the humidifier
inside the machine.
It actually sits in the machine.
It also has a software upgrade to support the better circulation and wet capping.
So it's not a smart cycle where it's running the full cycle for you, but it does have the
upgraded dampers, the better circulation and the wet capping all with the upgraded software.
With the new Apparel Printer Plus, it's not about improved print quality.
It's still a great print.
It's about better stability, better maintenance so that you can run a better, more consistent
business.
Now, if you don't have a DTF printer and you want to get into apparel printing or really
printing on just about anything with a DTF print, you can follow our links down below.
If you're an existing Apparel Printer user, you can follow the links below to get your
upgrade kit.
And otherwise, I am about out of time.
I don't have to go do any maintenance.
I don't know what I'm going to do, but a big thanks to the Make It Mafia.
That is the best mafia.
That is our membership area over on K&GMakeIt.com and if you're not a member yet, you should
check it out.
It's not just about the files.
It's about business content, behind the scenes, Zoom calls.
There's just so much more.
And the whole maker community.
It's really about the family.
It's about the family.