Discover 5 surprising materials you can laser cut and engrave with a CO2 laser! We test EVA foam, cork, foam core board, craft plastic sheets, and MakerStone flex sheets on the AEON Nova 14, sharing our exact speed and power settings. Perfect for laser crafters, small business owners, and makers looking for new project ideas, tips, and inspiration for unique laser cutting and engraving projects.
Here’s what we tested: 1️⃣ EVA Foam – Lightweight, waterproof, and perfect for cosplay armor, stamps, and tool inserts. 2️⃣ Cork – Eco-friendly, flexible, and amazing for coasters, trivets, wall art, and more. 3️⃣ Foam Core Board – A fast-cutting option for prototyping, signs, and UV printing. 4️⃣ Craft Plastic Sheets – Durable, flexible, and ideal for stencils, bookmarks, jewelry, and signage. 5️⃣ MakerStone Flex Sheets – Real stone veneer for stunning inlays, wall art, and custom décor.
We’ll show you how each material cut, how it engraved, and what settings worked best — plus, you’ll see them all come together in one big laser-cut project at the end.
Whether you’re looking for new product ideas for your small business or just want to experiment with cool materials, this video is packed with inspiration and pro tips for laser crafters at any level.
📌 Chapters: 00:00 – 5 Materials You Didn’t Know You Could Laser Cut 00:44 – EVA Foam Test 02:35 – Cork Test 05:58 – Foam Core Board Test 08:59 – Craft Plastic Test 10:46 – MakerStone Flex Sheet Test 13:58 – Pro Tips & Final Project
FYI: We are not professionals, and we don’t claim to be. This is what we found worked for our project. Yours may need a little different approach. We have just enough woodworking skill to make some basic furniture. Safety first!
FTC Disclaimer: This is not a sponsored video. All opinions are genuinely our own. This post may contain affiliate links and we earn a small commission if you make a purchase after clicking on my links. It doesn't cost you any extra. Thank you for your continued support to keep Making It!
We just tested five products that you
didn't know you could laser cut or
engrave. And we'll show you what we
learned right now.
[Music]
>> What is up? Welcome back. Do you like to
do it, build it, or make it?
>> So do we.
>> So be sure to like, subscribe, and hit
that bell to be notified of our new
videos. We're testing five materials in
our Eon Nova 14 today. We're going to
test to see how well they cut and
engrave.
>> These are five materials you didn't know
that you can cut and engrave. Well, we
didn't really know. We hadn't really
tested. So, I can't wait to show you
what we've learned, and we're going to
put them all together in one big project
at the end. So, stick around.
>> Material number one, Evva foam. Not to
be confused with PVC foam.
>> That is right. You cannot laser PVC
foam, but you can laser engrave EVA
foam.
>> This is just one of those like floor mat
pieces that's puzzled puzzled back
together. This is great because it's
lightweight. It's super flexible. It's
waterproof. You could use it for a bunch
of things.
>> So, we've seen it used in cosplay. It's
very popular with cosplay for armor and
props and things like that. You've seen
it use it for kids project or craft
stamps. You can engrave it and make
stamps out of it.
>> I've seen these used for tool boxes, for
tool inserts to keep all your tools
organized. There's a ton of uses for
this. It comes in thinner sheets. And
there's a ton of colors if you're
getting into like the cosplay and stuff.
>> But we've got the gym mat size here. So,
what would you say this is? Half inch.
>> About half inch.
>> And uh so we're going to test this. We
want to test and engrave each of these
materials. So, we're going to start with
the EVA foam,
>> right? We're going to throw this in our
Eon Nova 14 for a couple of reasons. The
first, I don't feel like cutting any of
these materials down. I just want to
throw them in and and run some test cut
cards. Two, because we're using a bunch
of different thicknesses, the Eon Nova
14 has autofocus. I don't have to get
out there with my gauge and and set any
focal heights. So, that's nice. And
we're going to use the same test cut
card for all of our materials. We're
just going to jump into LightBurn, set
up a test cut card. I already have a
bunch of them saved for our Eon Nova 14.
So, we're just going to run that test
cut card on all of these materials.
[Music]
We're back with our two test cut cards.
The cut, it cut beautifully. It did a
great job. It cut pretty easily. There
wasn't a whole lot of power and speed
needed to get through this material. How
did the engrave get?
>> The engrave was beautiful, too. Like, if
you get your settings perfect, the
engrave is amazing. I was surprised at
how well it engraved. Lesson learned. If
you're engraving, though, I would not
leave it alone. Do not leave it
unattended because it will catch fire.
It is flammable. And I don't know what
the like fumes are because we've had our
exhaust hooked up. The exhaust is just
blasting through some filters and then
outside. But I wasn't able to smell any
>> I was surprised. I was I was hesitant at
how stinky or smelly this might be. I
mean, we all know that acrylic has got a
smell to it. I really didn't smell when
this was cutting and engraving, there
wasn't much of a smell. Even after it uh
got a little smoky, little smelty, it
was it wasn't too bad either. So,
>> I was pushing it to its limits, but I
think it'll be fine. It engraves
beautiful and it cuts beautiful, too.
I'm excited to use this one in the
future.
>> We found the best settings for cuts for
the Evva foam are 25 speed, 40 power,
and for the engrave, we did 150 speed,
and 30 power.
>> Material number two, cork. I like cork.
Cork is nice because it's eco-friendly,
it's flexible, it's water and heat
resistant, and you can get this stuff
anywhere. like uh we picked this roll up
at Michaels.
>> It's super lightweight, so if you're
making a project out of it, it's not
going to add a whole lot of weight to
your project. It's pretty exciting.
There's so many uses for cork. I know
you've seen it used in heat pads and hot
pads for trivets. It's been used in
coasters, things like wall art or maps.
You can use it for things like that, pin
boards. What else?
>> Drawer liners. I mean, there's so many
things you could use this for.
>> If it's super easy to cut and engrave, I
think there's a bunch of cool things
that we could start adding these to.
>> We're going to throw this in the Eon
Nova4 tea. And again, I'm going to keep
part of it rolled up. I'm just going to
use magnets to pin it down and keep it
flat while we do our engrave and cuts.
And it works out fine. As long as I keep
the roll low, it shouldn't hit the
gantry.
>> And that's what's great about having
such a large laser bed. I know for a
while when you start out with a small
desktop laser, that's great. You're
really getting into laser engraving, but
when you level up to that larger bed and
you have more room to cut larger
materials and I don't have to cut any of
these things down. I'll be able to put
them straight in the bed. It's so nice.
And for it to be auto height adjusted,
all I have to do is press the button.
It'll adjust it to the size of the cork.
Super
>> super easy.
[Music]
We're back with our cork. It did cut
beautifully. It engraved beautifully.
So,
>> it engraves surprisingly well. Like,
when you get it dialed in, this is nice
and black, but it's not deep. And it's
not too char like it doesn't wipe off so
easily. So, I'm stoked on the cork. What
we found with the cork and the engraves
with the cork, once it's done, you spray
it with a little bit of LA Awesome, rub
it, and it takes away any char residue
that's left on your cork material.
>> It does stay wet forever, though, so use
that in mind.
>> Use a haird dryer to dry it off if you
have to.
>> And for our 100 watt laser, we found our
perfect cut settings were 25 speed, 45%
power. And for the engraved 200 speed,
37.5%
power. We dialed it in.
>> Material number three, foam core board.
This is just some foam sandwiched
between two pieces of card stock. It's
lightweight. It's rigid. I mean, I love
this stuff. I used to use this stuff all
the time back in my art days for models,
props. I like it for doing prototyping
because of how rigid it is. Uh, it's
great for things like temporary signage.
Uh, like he said, like photo booth
props, things like that, layered wall
art, which is something we're thinking
about using it for. I'm curious to see
how well it cuts and engraves on the
laser.
>> Me, too. We're going to throw this in
the Eon Nova 14. And again, I'm not
going to cut it down. We're just going
to toss it in there. This looks a little
warpy, so I am going to use magnets to
keep it flat.
[Music]
We're back with our test card. I think
we learned a lot with this one. Uh the
foam really does not like the heat. So,
you have to cut this slow and low cuz it
will melt the foam on the inside. It
will cut the paper, but it really just
it's like cotton candy on the inside,
right? Soon as that heat, it starts to
dissolve the inside. So, we found that
the perfect cut settings for the foam
core were 35 speed and 50 power.
>> And the perfect engrave settings were
no, don't don't do it.
>> Don't engrave it.
>> It is not an engravable product.
>> It goes It goes nothing and then burnt.
So, there's no really in between.
>> You can't really engrave the paper. And
like I said, as soon as the heat touches
the foam on the inside, it dissolves.
>> It starts to shrink. Yeah.
real quick,
>> but to cut it and it still has its
rigidness and it is still able to be
able to be used for things is great, but
the sides aren't great. I mean, so this
is something you have to think about.
>> Does blow out the sides a little bit.
>> Mhm. And it looks a little dirty. I
don't think this because it's paper,
it's not really washable too much,
right?
>> No, but you could paint this easily
paint it.
>> That's a good idea.
>> I think it'll be fine. But again, I
mainly use this for like prototypes and
models, things that I need to be a
little closer to quarter inch and to see
how they would actually stand up.
>> Another great thing about this, this is
great for UV printing because we're
using the white. You can get this in
other colors, but because it has a white
base, it's going to UV print
beautifully.
>> Material number four, craft plastic,
that this stuff was cool. And I just
found out like literally a second ago,
it comes in a variety of colors.
>> He said, "Wait, we have all those
colors. Why do we use why are we going
to use silver and black?"
>> Now, all that she gave me was silver and
black. And she goes, "Here, go test
this." So, I thought it only came in
silver and black. It comes in like a
cornucopia of colors.
>> It does. It's beautiful. But I only had
a full sheet of silver and black.
>> That changes everything cuz this stuff
is great. It's durable. It's
lightweight. It's waterproof. Super
flexible.
>> Mhm.
>> This is great for stencils. I can see it
now. I can see it being great for
jewelry,
>> accent panels, bookmarks,
>> outdoor signage. You cut all your little
letters and glue it on. You don't have
to worry about any of the like wood or
anything puffing up. You don't have to
use the expensive, no problem.
>> Anything where you need acrylic but
needs to be flexible and lightweight,
>> right? I was sharing with him. I think
this would be perfect for something like
a pencil holder where you might want to
put a name or a design and wrap it
around.
>> Yeah, you glue it right on. It's going
to be perfect for something like that.
>> Tiny top hats.
>> Tiny top.
>> It's great for a lot of things.
>> All right, I'm going to throw this in
the Aon Nova 14. We'll run some test cut
cards and see what happens.
[Music]
We're back with our test cut card. It
cut great. I think our perfect settings
for cutting the craft plastic were 50
speed and 45% power. So, it cuts really
quickly.
>> If I had to pick a perfect setting for
engraving, I'd probably say 125 and 30.
Well, you can you can kind of see it.
Now, I did it on silver because I didn't
know we had all these other colors. It
might show up a little bit better on
different colors
>> on a darker material, but I don't really
think it's
>> it's not really an engravable type
material. I guess it it'll etch the
surface and you can engrave it, but
there's not a lot of color contrast
there. Even if I were to do it on a
darker material, it's not like it's
going to have another layer behind it
that's going to show with another color.
So, I wouldn't really say this is an
engravable material. It's really a great
material for cutting and the color
should come from the color of the
>> I enjoyed how well it cut and after we
were done cutting it still lays flat.
There was no warping. So this would make
a great like spray paint template right
here.
>> Oh yes. Yeah.
>> Like we used to do all these backers and
all the time and I'd have to create an
MDF template for some of the backers or
we had a pattern.
>> Storing this pile of stuff. These little
>> This is what my new templates are going
to be made out of right here.
>> Mhm.
>> Material number five. Are you ready for
a surprise? Stone. These are Maker Stone
flex sheets. This is real stone. It's on
like some kind of backer. It's got a
material backer that holds all the stone
together.
>> It's like a mesh fabric.
>> This is again super flexible, super
lightweight
>> and genuine stone. This is a real
>> It's like a shaved piece of stone and
it's then put on or glued to this backer
piece.
>> And I could see this being used for like
furniture inlays. I can see it on some
jewelry.
>> Yes. Decorative wall art panels.
>> Wall art panels. What else do I have?
>> I seen a really cool award that they did
out of stone. It was stone and acrylic.
I bet you it was this stuff that they
used.
>> I think this is, you know, this is kind
of a creative thing. What other cool
things can you make with this? So, let's
test this on the Eon Nova 14 and see how
it cuts and engraves.
[Music]
We're back with our test cut cards. I
have the cut file here and it cut ex
surprisingly well, pretty quickly for
being actual stone. I think the cut
speed that we found is 30 speed, 45
power. Now, we do our MDF at 10 and 50.
So, 30 and 45 is pretty good.
>> Yeah, this went it went through pretty
good. For engrave again, I might say no.
No, because again, it went from barely
being able to see anything and because
it's so textured, it's really hard to
see to kind of burn through to the
little backer piece,
>> right? The backer is like a a fabric, a
mesh fabric that it's mounted to. And
when you engrave away the stone, you're
going right, you're basically seeing the
fabric. There's not enough contrast
there. You can't just etch the stone and
actually see it. Just basically
scratches the surface. But I definitely
think it's cool if you want to do inlays
or, you know, anything that looks like
stone that doesn't need to be engraved.
I do know that you can both DTF print
and UV DTF print on these. It sticks
great. We did that for
>> I know those of you are getting those
printers, this is a great material to
print on.
>> Yes, it definitely looks cool when it's
printed. Now that we know our speed and
power test settings for all of these
materials, we're excited to use them in
some upcoming projects.
>> We've been dying to use them in some
upcoming projects. Think Halloween.
>> Mhm.
>> All right. Well, we are about out of
time. I got to go start my Halloween
projects.
And we're going to give you leave you
with one quick lesson learned. We used
3M tape on some of these, which was
great. It worked well, but it wasn't
forgiving. Once we put this cork down,
you couldn't get it back up. So, we got
a little rip down here. So, glue might
be a better option if you need to move
it around. Have a little play with it
before it's down permanently.
>> Otherwise, it's down down. Like our
patrons, they're always down. They're
down for a good time. That is a great
community over there. You got to check
us out on Patreon if you like these kind
of projects. We have free files, Zoom
calls, there's a bunch of good stuff,
but it's really about the community.