My shop never stays the same and with a large loft bed build in the near future the changes have increased my much needed assembly space.
Like and Subscribe if you like what you see! facebook.com/jayscustomcreations youtube.com/jayscustomcreations Project plans: https://jayscustomcreations.com/plans/
all right I'm in the middle of a another
shop remodel uh which is kind of crazy
because 3 weeks ago in the end end of
December I remodeled it again but I've
got a few more larger pieces and um just
want things to flow a little bit better
so the first thing I did is immediately
when you come into to your right I had
my old miter saw stand
all the way across this window um I'm
not sure what I'm putting there right
now but I took all that down freed up
all that
space and uh got to do some organizing
obviously but getting rid of some old
stuff like this little file cab that I
can't save I thought I could Salvage it
but it's gone it's in the way there's my
little shop cart that used to
be over in that corner but I'm finding
that as I work on projects I use this a
lot so having it shoved in that corner
only to be pulled out for the project
just to be pushed back in when I'm done
is a little uh contradictive so it's
going to stay out here in the majority
of the free space which I've got once I
get all this junk put up I've got about
a I don't know 12 by 13 ft empty floor
space for my larger projects like bunk
beds and whatnot but I moved that over
there the saw I moved a little bit back
uh a little bit away from the window
um I still have it away from my
workbench which I rotated but I took
that door down because it just wasted
space in there and now if I want to get
back there to store something um it's
going to be low use storage I can just
move my little trash can move my stool
and walk back there so the door's off
and that's mainly got my uh just small
mechanics type
tools rotated my bench 90° uh I found
that when I had it going that way I
would only use about 24 in from the
front of the bench left and I would just
store junk over there which is what I've
got on it now so what I did is I rotated
it so I still have my about 24 in or so
to use and I pushed it up against the
wall which is going to Aid in hand
planing cuz as I'm pushing the plane
forward it's stuck on a wall so it's not
going to have any give in the bench
which I had a little bit of a problem
with that last time so that's good but
the main reason I turned it 90° is now I
have access to this corner and I have
access to this wall uh I just received
two um
trash uh 30in wide wall
cabinets and if I can hang both I will
hang both if not I'll hang one and then
maybe one below I've also got a short
wall cabinet that was above a
refrigerator or stove or something like
that and I'm going to put it I think
right here above that plug below the
window sill then put a little shelf on
top of it for I commonly used items like
my glue and my brush and some other junk
and for my drills make a little drill
charging station kind of deal and then
put some Fasteners inside it my
Fasteners are normally in that Open
Drawer right there but because of my
layout now it's going to be all the way
over into the corner that won't be too
convenient this this will be just
slightly more
convenient but you know I I still like
this dresser setup I still going to use
it for storage just not stuff that I use
all the time
so and I still got my window in case I
need to rip something long that's
dimensional can go out the
window and the point from here to the
saw blade I want to say I haven't
measured it but it looks like about four
or 5 ft so all I have to do is move the
saw back just a little bit so it won't
pivot down that'll be good and I've
still got I've actually got a full 8T a
little bit more than 8T going this way
so if I wanted to re rip a sheet good I
can um another thing I'm going to do
that hose is coming down like I said in
my shop tour that is I want to smack
myself every time I think about that
that's horrible for a for a hose so that
little me Medicine Chest cabinet I
salvaged that's coming off I'm not sure
where it's going to go and uh all my
lamp rack that's coming off it's
probably going to go somewhere along
that
side uh may go I don't know may go
somewhere along the back side of this
but it's coming down all that's coming
down my ibuildit.ca miters saw station
is going to go right up against that
wall with enough room for me to reach my
hand for the switches that'll be plenty
good enough for
me that will allow me to build these
extensions that I'm going to I'm going
to make that little piece of melamine is
about 2 and2 in wide I don't want to I I
use that as a little example for me to
test out what I want I don't want to go
with anything wider than that that's
going to be fine make it keep it light
uh just give me an extension I can put
up over here and then put back down when
I don't need it with that all the way up
against the
wall I can build one on this side too if
need be I also added casters to that
thing nonlocking C
um it rolls around just fine it stays
put just fine so that's cool that's
going to be in this corner basically
bringing all of my used uh commonly used
tools into an an arrangement which
brings me to this little stand I had I
use my drill press a lot and I had it
sitting in this space where the
refrigerator would
go but obviously it creates saw chip uh
sawdust and wood chips so it wasn't
really convenient to clean up after uh
with it out here I could just pull this
aside sweep out push it back uh May
build a dedicated stand for the drill
press cuz I use it quite often but not
sure at the moment and my
sanders uh orbital sander DeWalt
laminate router and belt sander I use
those three a lot so having them back
out into the workflow is
good and let's see what else is
planned my thickness planner I want to
build a dedicated cart for it to sit in
here uh I've had these plywood L-shaped
legs built for a while and I need to get
those put to use they've been sitting
there for a while so I'm probably going
to build a cart system that sits right
in there but I want to do some type of
dust collection for it
so that's going to be on the back burner
until I get that figured out nothing
extravagant because the motor on the
planer ejects chips quite well
so you know maybe something into a uh a
box with a pillowcase over the top of it
kind of thing so that'll work
but yeah 3 weeks after my shop tour my
shop changes
completely
so we'll see what else
happens plenty of good organization and
room for more got all my Brad nailers
pin nailers glue and glue accessories
uh both routers and some router bits and
all my safety stuff my two dust masks
respirators then my masks Band-Aids ear
plugs ear muffs safety
glasses storage
above and open
space I've got uh couple Loft fulls
siize loft beds coming so I need this
space over
there and need to find a spot for that
uh sliding miter
saw but I've got plenty of space to
build
on and finally some organization all my
used uh tools that get used in one
location I'm drill press scroll saw
miter miter
saw and as it sits everything is plugged
in which is weird cuz I've never had
that where everything is ready to use
all at the same time so so that's nice
like I said nice storage in there got
more storage over here and my dust
bins I've already been doing some
planing on this and I got to say my
bench turned this way clamping on this
side and this corner planing that
Direction with the the wall in the way
this is really solid and my trash bins
right here so as I'm playing dust right
in there so hopefully I won't have to to
uh sleep as
much but my ever evolving
shop constantly changing so uh I've got
some more plans in store for some
changes here soon as well
so uh you know nothing nothing stays the
same but this is pretty cool I got a lot
of space over
there