On 11/3/2017 Shawn and I went to hang out with our friend Wayne and have a "day of woodworking." Just hang out and have fun. We originally weren't going to bring the cameras but we decided to late in the planning stage.
Good morning everybody. It's gotta be a little quiet because it is awfully early but
today I'm headed to Jackson Mississippi to go hang out with my good friend Wayne.
I've had a build planned out for quite a while now and just gonna be a day of
woodworking so it's gonna be fun. We're gonna make a barstool or a shop stool
and a mortise and tenon type joinery on the bottom and then a curved or carved
seat. I've never done any power carving before so it's gonna be fun but it is
really early and I've got to get some coffee and meat.
All loaded up. Just missing one thing. Someone else who's riding with me. I'll be here in
just a second. So I've got all the necessities. A little box full of tools. My apron which
you can't see because it's so dark outside and some gifts. You always take some
gifts when you go to visit somebody else's shop. So just waiting on one more
piece of the puzzle.
Let's figure that out. There we go.
Good morning Sean. You ready to go Sean? Sean you ready to go? It's early. It's early.
You ready to go? Have you had your coffee? You had your coffee? I'm working on it. No, no coffee yet?
No coffee? Okay. Coffee. My dogs are barking. Let's go Sean. Sean let's go. You ready?
Yeah. Yeah I'm ready. Okay.
We are headed to...
We're headed to Jackson, Mississippi this morning.
Well kind of Jackson. The Jackson, Mississippi area to hang out with a good
friend of ours Wayne Brown and just get back to some woodwork and just have some
fun. We're gonna be power carving a seat and doing some mortise and tenon joinery
on a basically making a shop stool. Just a quick and simple fun little project
that yeah should be fun.
So we made it to Wayne's. Already unloaded tools and all that and we're
going to make a bar stool today and here's the lumber. What thickness do you
mill it to? So this is 8 quarter maple and here's the seat and here's some nice
blanks that he got. Olive wood. He's gonna turn something out of this. I don't know
if he'll do it today but he just got this blank in olive wood and this is
African blackwood and cocobolo. But it's a little early still this morning so
we're going to just chill for a little bit and discuss the project and then
we'll get rocking and rolling. Still have a lot of the day left to go. So we got
the seat. We got the seat somewhat outlined as far as where we want to go.
The black is the do not disturb line and then the yellow kind of represents the
deepest point all the way around. So I don't know about you but I think that
looks like the snapchat logo. So we're over here trying to lay out all the
parts for the shop stool and I brought a lot of stuff but the only thing that I
forgot was my clipboard which has all the dimensions for the project that we're
working on. I like to print out everything from Sketchup to work from.
Luckily a lot of you guys in the comment section have asked me about Sketchup
viewer for mobile devices, cell phones and such and I've never used it. Well I
just downloaded it on my phone and it saved the day. I was able to get exactly
what we're working on and this man I tell you what technology is fantastic. So I
got all the rough dimensions needed and did my own little layout here or diagram
rather so that we can mill out all of the pieces for the legs out of these two
boards. Alright who's gonna drill the holes? The yellow line. How not to work with kids.
John's gonna get dressed up for this. Let me put my bucket on. Y'all stand by.
I'm gonna do a snow angel. I'm gonna do a snow angel.
We got most of the carving done. Sean did probably most of it. He's yeah I think
he's enjoying it the most. He's really really taking to it quite well and I cut
the legs for this thing. Legs and stretchers. So here's the initial carving
on it. Not too shabby. All three of us gave a little bit of effort on it. Sean
like I said probably did the most but neither one of us have had any carving
experience prior to that. Power carving anyway. So that turned out pretty cool
and let's see this is what is this? This is a this is one of the legs. So let me
get back over here. We've got all four of the legs and all four of the stretchers.
We have to do some, that's not curl, that's bandsaw stuff. We have to do a
little bit of cleanup work because I use the bandsaw like I've never used bandsaw
before and let this get away from the fence. So we're gonna have to plane these
down. They're inch and three-quarter right now but probably gonna get about
an inch and a half square on all these and then we'll cut the joinery. So we
still got a lot to do but we're gonna break for lunch. Just blew out the shop.
It was it was insane. Alright we're back from lunch. I'm set up over here to
square up these leg blanks and stretchers and rails whatever they're
called blah blah blah and they've decided to move the carving station
outside. Just a little too messy so they're gonna be carving out there and
I'm gonna be over here with the leg material getting this ready to go. I do
have to plane everything so I'm starting to stack everything up here in the
the mortises. One of the mortises cut and there's a total of eight so I don't
think we're gonna get done today. The other mortise is over here ready to be
cut as well. These pieces are already cut up a little bit to be the tenons and
then Sean's over there making goofy sounds trying to make me laugh. But we've
got a little bit of blood here. I did not hit the point of the chisel. These are
some Narex mortise chisels and this edge I was holding the chisel like this kind
of low and the edge sliced my hand a little bit and I didn't realize it until
like two or three chops later. So got a little DNA there but little tape that's
all that's needed. And then the seat. These guys got the seat going pretty good.
Excuse me sir. It looks fantastic. Looks fabulous. What do you think of the seat Wayne?
Fits my butt. Fits your butt. Did you want to bring this back more? Yeah we'll
probably. I haven't worked on this side at all yet. This side is coming along right here.
Yeah we're gonna bring it down a little bit.
It is three o'clock. Is it three o'clock yet? It's a little after 3 p.m.
We're calling it quits. We've got a long drive home. We didn't get that far
but I didn't expect to complete this thing by any means today. So
we've got just one complete mortise and tenon joint through a mortise. This is
all done by hand. We were kind of like mixing around and trying different
things. I did this one. Sean did this mortise. We ran out of time to to get the
tenon done and you know I was picking at Sean the entire time he was doing this
and his mortise ended up turning out a lot better than mine. Write it down folks.
Write it down folks. So Sean did good with that. Sean and Wayne also did
good with the seat. This is the final state of it today and I still got a
little bit of a little bit of work to do. You guys remember Wayne? Remember we did
a shop tour in his shop? That's where you do a shop tour in the shop? I'm still
big and fat. We used a holy Galahad. Holy what? Holy Galahad.
Power carving discs. We used a fine and a coarse. Fine and a coarse. So we kind of
shaped this like a Maloof seat and then of course we'll have the legs and
stretches on there. So we all three took turns. We kind of designed it out. We
shaped it out. We got the pommel in place. So this side is a little bit smoother
than this side but we still have some scraping, some detail work to do and then
Jay's thought was to carry this design coming around this way and taking
thickness off this way so it would be a little bit less bulky. Yeah. I think it'll
improve the overall appearance. I think it looks good man. Once you get the bottom kind of shape it'll really stand out.
So Wayne's gonna tinker with this and he's also gonna finish up the base.
The goal with the base is to just have just basically four legs and four legs
four rails and it's gonna be two of the legs are gonna be in by seven degrees
and then we're gonna get set this right on top of the legs and then drill
through this into the top of the legs and join the two assemblies together
with the top of the base. Maybe walnut dowels, maybe padauk. Walnut, padauk.
Whatever we make the wedges for the tenons. Yeah some type of
contrasting wood. Whatever we make the wedges for the tenon. So it's gonna
look beautiful. Not too shabby for the first day of power carving. What'd you
think of power carving Shawn? I love it. I'll probably do a lot more of it. Probably gonna do a lot more.
What about you? You ever gonna do it in your shop again? It looked like
Pensacola Beach in here. It was at least this thick. It was all over everything. It was
incredible. I didn't think it would actually turn out this good. I mean for
our first attempt. What are you trying to say Wayne? It looks a lot better than
macromonas. Just kidding man. Just kidding. So we started carving this inside on the
workbench as you guys probably saw and we had to actually completely clean up
the shop and blow it all out well right before we went to lunch. It was just it
was a bad idea going inside here. But anyway it was fun though. We did wear safety.
Absolutely. We protected our lungs. Anyway me and Shawn are headed back. It's a two
hour drive and then Shawn's got like a 45 to an hour drive after that. So you
guys take care. 30 minutes. 30 minutes. The way Shawn drives. Yeah 30 minutes.
And don't worry guys I'll clean up the shop. No just go ahead. Alright Wayne we'll see you.
Okay let's clean up the shop. We got it. See ya. Take it easy. Two hours later we're home.
Just like that. Just like that. Well we're at my home. He still has a half hour drive.
Two hours later. Two hours later. Alright Monday we'll resume a building the
vanity. I'm taking tomorrow off. You guys take care and I'll catch you next time.