Due to the weather, the dirt work we contracted out for the driveway and shop pad has been delayed. So, we spent some time doing grunt work to shape the driveway and get a better visual of how it will look and where it will be.
We got the tractor out to the property for the first time, which was exciting, to say the least. Tractor seat time is therapeutic. To help us clear our piles, I use a Woodland Mills WC68 6" PTO Wood Chipper, powered by the tractor PTO, and can handle material up to 6" in diameter. The chipper is rated for 20-50 PTO horsepower. My tractor has 30 horsepower at the PTO, so I won't be able to maximize the capability of this chipper, but it will allow for growing room if I get a larger tractor in the future. I haven't measured anything, but I believe I chipped a 5-6" diameter pine tree with it with no problems. I think I could chip 6" pine easily, but hardwoods are another story. You can audibly tell the ease of chipping pine vs the power demand of similar-sized hardwood. Considering we have 101 acres of trees, this will be a handy implement for the foreseeable future.
A lot on the to-do list today. Starting with cleaning up this side-by-side. We got a Bad Boy
Bandit 550. The only thing Bad Boy about it is the logo on the back. Bad Boy started out as a
lawnmower company and then they expanded to tractors and now side-by-sides and all kinds
of other stuff. But the only thing Bad Boy on this is the logo. This is a Hisun model. H-I-S-U-N,
Hisun. And, you know, mixed reviews. This thing was priced accordingly. I've been really working
it hard since we've had it and it's been impressive so far. So hopefully I don't jinx myself. But I
got to get this thing cleaned up a little bit and grease all of the undercarriage before I head to
town and buy another chainsaw. Here's my going to the woods packout that seems to be working just
fine. A gallon jug of water. Can't go without that. A bucket toilet. That's mainly for the
five-year-old daughter that we have. That saves the workday. Bar oil chainsaw. This is an MS-250.
I've had this for years. It's been a really nice chainsaw to me. A drill or an impact and some
screws and a hatchet. A gas jug for the chainsaw and then a ratchet strap. I've used that ratchet
strap to hold crap into the bed of the of the UTV several times. So don't forget a ratchet strap.
Especially when somebody donates a bunch of stuff to you. I mean, so kind of them to donate
the feeder and then that climber. So kind. Trying something new today. This is, uh, I picked this up
on a recommendation from somebody else. This is a lock and lube grease gun. The coupler for the
actual grease fitting is locking with a little trigger release here.
So you can lock it on there. Not worry about it popping off when you're giving it grease.
And then when you're done you can press the button to remove it instead of being frustratingly
yanking on the thing. On top of the handle here is a zerk fitting so you can lock the coupler
right to this fitting and hopefully prevent grease from going all over the place.
Accidentally. Hopefully anyway. We'll see how it works out. All right, super annoying to do
these like five minute first impressions. Oh wow it really works kind of reviews. But this works.
I like that. This little handle here. Now you don't have to buy, oh come on wind, you don't have to
buy the whole gun. You can get just the hose for your grease gun. But that right there, that's super
handy. I like that. We're still waiting on a contractor to come in and do a little dirt work
for us. So I'm not too crazy about the driveway but man I gotta do something. Gotta do something
soon. Starting to get a lot of a lot of wash out here. We at least have the gate cleared off and
then the last time we were here we cleaned out a little bit beyond the gate. Just getting better
access with the side-by-side. I think today's plan is to increase the access just a little bit
with that pole saw and just widen these trails a little bit. I was not anticipating how fast all
this stuff is growing back. Just like within the past week or two we're growing back quite a bit. So
while the side-by-side still fits through here just fine I'll make it a little bit easier to
get back there. And we need to really dial in where we want our home site to be. We came out
here today with no real intentions of what to do. Just start cutting and start making progress.
And I think it's kind of turned into framing out the driveway. We've got some of these larger old
growth trees that are going to kind of wrap around-ish the driveway. So just a little trimming
over here and you've got a nice little opening start to take shape right underneath this big
old monster. We've got all these piles building up and the wood chipper will be here in two days.
So I'm curious to see how it performs with all the smaller stuff. I know it'll chip the center
stump- the center- what's it called- the main trunks of these smaller things no problem.
But all this other little small stuff I hope it doesn't try and like wrap up and
clog around it or whatever. But we're- I say we, my wife- she's being a rock star right now
getting all these piles going. You having fun Tyler Kay? Thumbs up, thumbs down?
Oh not having a good day today. It's okay. Not every day is a- not every day is a home run.
I've been waiting for a little while for this. This is a Woodland Mills WG24 stump grinder
and a Woodland Mills WC68 wood chipper. And I have been waiting for these- who's peeking
around back there? I saw you peeking. I've been waiting these for a little while. We've already
been doing a bunch of clearing on the property so we're gonna get started probably with the
wood chipper just to clean up the mess we've already got. And we can come back and do all
the stumps a little bit later. So this is today's agenda. You gonna help me get this set up?
Probably not? Thumbs up? Okay cool thanks. Before I can offload those, got an order of
operations thing going on. I've got an old disc on the back of the tractor for ballast.
I gotta go return that to a relative. Then I gotta put the forks on the front. It's got the bucket
on the front of it. And then get these offloaded or unloaded and then get them hooked up.
Pretty cool to get a piece of equipment in that is on a nice sturdy metal pallet, right? So it's on
its own little metal skid. No worry about crushing the pallet or getting a crappy pallet.
That's pretty neat. On the side of the machine is a tube. Unscrew the lid and you have your
operator's manual and some tools on board at all times. That's pretty handy.
Just took a measurement from the spline on the PTO shaft, the little nub right there,
and the spline on the implement side of the PTO shaft, that little nub right there in the middle.
I said spline, that little nub. And took that measurement with the PTO all the way up and that
is shorter than the straight distance of this PTO shaft by itself. So this PTO shaft is longer,
which means I need to cut it down. I did the equation, did the math. I need to remove 3.2 inches
from this side of the shaft, 3.2 from that side of the shaft, 3.2 from this cover, and 3.2 from
this cover. So yesterday I was trying to beat the rain, and trying to beat the rain also means I was
rushing. I put the PTO shaft on backwards, not thinking about it, and I got the wrong kind of
hydraulic oil. So this morning I went to town, swapped out the hydraulic oil, filled it up with
an exact 5 gallons of hydraulic oil, and now for the first time we're ready to take a large piece
of equipment out to the property to get some work done. This is exciting. So this is the way it's
going to look during operation, but during transport this has to go, this has to go forward
so that this can pull forward as well. Now putzing around the property I think this will
be just fine, but going down the road I'm going to secure this obviously a little bit better.
I just got word from the driveway guy that he's ready so I think I'm gonna shift gears and
figure out something else to do. But this wood chipper is pretty darn cool. When I started
yesterday on the tractor I had 9.5 hours and I have 15.7 now, so that means a little bit more
than six hours of PTO time. So that hour range was nothing but PTO work, so I've got six hours
with this wood chipper and it works great. Now I think a lot of yesterday was figuring out
this machine's personality, right? Every new machine has a personality. There's things that
it does and doesn't like. For example, when you're feeding a log through, let's just say
I'm feeding this log through and there's a branch sticking out like on this angle. So as the roller
is trying to roll the log through and pull it through and pull it through, if it hits this stick
sticking out, that stick on this wheel of a roller almost acts like a wheel chalk. It just stops.
So if it's if it's on the top, sometimes it'll want to twist sideways and then finish pulling
it through. Other times it just sits there and spins. So at that point you just got to kind of
figure out what what logs do what and you can reverse the feed of the infeed roller and then
reset it really quickly. So this red bar right here, if you pull it all the way back to you,
all the way back to the operator, you're in the forward advancement of the roller. So if
crap hits the fans, you're having some type of an emergency and you need to stop the roller,
all you have to do is whack into this in the forward direction and it goes into neutral and
then reverse. So now it's reversing the feed and pushing the material back out of the chipper. So
that's pretty cool. That linkage, that red bar has linkage down here at the bottom
that adjusts this lever. So this lever position changes the infeed or outfeed of that roller.
That roller is right inside here, it's driven by a hydraulic pump. So the PTO spins back here
in the shaft, the PTO shaft spins, and then down there is another pulley right there and that pulley
drives the pump, the hydraulic pump. And the pump is used for the infeed roller. So the PTO itself
spins the flywheel where the chipper is and then the pump spins the infeed roller. Now this
infeed roller is in line with this right here and you can see this the spring is right here.
The more tension you have on that spring, the more it's going to want to lift up and make it
easier for you to put larger stuff underneath the roller. I haven't really adjusted this at all,
well I haven't adjusted that at all. And then also there's a depth stop right here that you
can adjust if you want to raise it up a little bit. If you're mainly working with larger stuff
I can see how that could be handy. Or if it's just not grabbing any of the smaller stuff,
I think you can actually lower that to lower the default setting or the default height of the wheel.
This is the speed for your infeed roller and you can slow it down up to zero right here,
but I'm messing around with it, I've noticed no difference. So I just left it wide open.
That's pretty cool. Oh this is handy, this is really handy. The tube here for documentation
as well as a couple tools out in the field. I have a wrench in there because when this thing
clogs up you got to take this bolt out and the whole top of the shroud flips over and you can
unclog as needed. This clogged up on me a few times and what I found out the problem was
mainly those real big green pine needles right there. Really big vegetation, green vegetation,
like leaves rather. It doesn't really like leaves because it can't really mulch those,
it can't really chop those up. Those just kind of get sucked into the system and then they'll
kind of clog right there. So a really really really big leafy branch or a leafy log,
that's where I was getting clogs. But if I can knock the limbs off and then feed them through
so it's, you know, the stem of the limb or the no leaf side then the leaves, no leaf side then
the leaves, it'll clear it out and you won't have any issues at all. Yeah, pretty darn cool. I've
several of these piles of wood chips and vegetation here and there. Really opened up the driveway
but I think it's quitting time for me on this driveway work because I got to go cut trails
and figure out where the house site's going to be while the guy who's doing our driveway
gets started on the driveway. Anyway, not the last time you'll see this chipper. I'm definitely
going to be putting this thing to use a lot going forward. I really like it and I got to get the
stump grinder out here and grind some of the smaller stumps that are still in the driveway
that I don't think we're going to bulldoze over. Just leave them and then build a driveway on top
All right, time to get to work on something else. Take care.