Special thanks to Bad Boy Tractors (box blade and grader blade) and my local dealer, Extreme Outdoor, in Ripley, Mississippi. https://maps.app.goo.gl/TJNXHsgacg1ipBqY6
On the last day of five, with no rain, I worked a bit on directing water away from the shop. I started with a shallow swale near the parking area and end of the driveway that deepened into a ditch further away from the shop. The entire two-acre clearing drains to the south edge, funnels into the forest, and eventually connects to the previously established drainage system. There are vegetation-filled ditches throughout the property that all funnel into the creek.
I also took a stab at draining the muddy area next to the shop. Still too muddy to make major progress, but it's a good start. At least some of the trapped water was draining as I was working. Much more work to do in this area to keep the mud at bay.
Finally, as the sun set, I had more time than expected to smooth the concrete washout from the last video. This washout is absolutely fantastic in areas where water cannot stand. However, I still need better drainage in one area between the shop and the driveway. That area will drain into the driveway ditches, opposite of where I worked in this video.
** Brand Partners ** ** Woodland Mills ** @woodlandmills #DiscoverTheWoodland#Woodlandmills#WoodlandMillsAmbassador - WC68 Woodchipper - WG24 stump grinder ** Lane Shark ** - Lane Shark LS3 ** Bad Boy Tractors ** - 5' box blade - 6' grader blade
Mint Mobile: Regularly $30/month for unlimited talk, text, and data. 50% off right now, so $15/month for unlimited talk, text, and data. Affiliate link: https://trymintmobile.com/bpo3
BRUNT Workwear: I have two recommendations from BRUNT, both are summer time work clothes that I've been wearing year-round. The Costello Pant are light weight and durable. The McKenna Tech Long Sleeve Sun Shirt saved me from being lifted away by mosquitos this past summer. Now that winter has set in, I'm finding it to be my go-to extra layer. When a coat is too hot but a regular shirt is not enough, slap this long sleeve on and get to work. Affiliate link: https://www.pjtra.com/t/2-529833-342731-289744
xTool Laser: We have the P2, F1, and F1 Ultra. All three are great machines. We typically use the F1 for fast engraving on smaller stuff, F1 Ultra for similar tasks or when we want to engrave on metal (fiber laser), and the P2 when we want to cut or engrave larger wood or acrylics. Affiliate link: https://www.xtool.com/?ref=x57e1_kqAgBT4A
All right, I've got my tractor warming up next to me. Hopefully it's not too loud.
Today is a tractor day, which is a great day. The last tractor day,
I spread four loads of concrete washout all in this area. This over here is going to be a parking
area where you just drive in maybe two, maybe three wide. You can park over there. Obviously,
this area right here is where we can enter into the shop. And of course, I have to make a wider
turn to get into the lean-to over there where my wife parks. So basically,
this is a parking lot. This is what I'm going to refer to as the parking lot, the parking area,
something like that. I spread out this washout and have a nice gradual slope. This was very
thick when I spread it out, maybe six to eight inches right here. And then over here,
that was a good foot in some areas. I wanted to let that sit for as long as possible,
so it's already been rained on once. And today is our fourth consecutive day of no rain.
So it's dried out as much as it's going to dry out for the wet season here in Mississippi.
So I want to use the tractor and the box plate to spread this out a little bit better,
smooth it out a little bit better now that it's nice and hard. And it's actually really hard. On
that six to eight inch area right here, I could jump on it and it doesn't move at all. So it's
packed down quite a bit. I need to get that done. I'm also going to use, that will be at the box
plate. I'll use the bucket on the tractor to dig out a little bit of a ditch right here. The
original ditch is the original four-wheeler trail and it works, but I think it needs to be deeper
to get a little bit more of the runoff and the ground seepage out of here. So box plate, bucket,
pallet forks, we're going to use the forks to move some of this lumber and some other stuff over
there, whatever I can use with the forks. Hopefully I can do it all with the forks and not have to
deal with the grapple. If so, grapple's implement number, was that implement number four I might use
today? And then if I've got enough time or if I've got enough progress, then I'm going to use the
rear grater blade on the tractor to dig this out a little bit further that way, just to keep
dragging it out and dig out a ditch over here. So possibility of five tractor implements today,
man that's shaping up to be a good day. Not a cloud in the sky as well. I'm ready to shut up and work.
I got the tractor stuck, but I don't think I really would have gotten stuck if I hadn't
accidentally bumped the continuous flow on the third function on my loader arms. So if I have
the continuous flow accidentally bumped on when there's not a continuous flow implement hooked
up like the Laneshock LS3, then I've noticed it disables my three-point hitch. It just drops
pressure. The handle does nothing and it won't raise up at all, it just drops and drags.
So that's exactly what happened. I didn't notice it until after I got
unstuck that my box blade was just buried. It was a boat anchor, so I couldn't pull it through.
With that being said, I'm going to try and actually use the box blade right where I did just get stuck
and just kind of push some of this material out. Just kind of scrape some of the goo before I hook
up the rear grater blade. I think the rear grater blade will just grab too much of that
goo and ball up and just slow me down worse than the box blade where I could just
gradually pull some away. Also, I want to get a lot of that material away from this side of the
ditch and I don't want to put it right here on the high side so water has a harder time hitting this
dam before it gets into the actual ditch to get out of here. So I need to get some of this material
gone and there's a tree line right here on the left-hand side stopping me from getting too far
this way or maybe turning the grater blade so that it exits the material on that side.
Yeah.