Antique British military swords: 1827 pattern Rifles officer's sword

Ancient Edge
3 followers
Jul 8, 2025
Hi folks, Matt Easton here, Scholar Gladiatoria. So today I'm talking about the Rifles Officers
Sword, that is the 1827 pattern. Now to go back a step, the infantry, infantry officers,
carried the 1822 pattern sword and that came in, replaced the spudroon, the 1796 pattern spudroon
that had been in service prior to that, and alongside the 1796 pattern spudroon,
which is essentially a militarised small sword. Alongside that, for flank companies, that is
essentially skirmishing companies, part of a regiment, they would carry often the 1803 pattern
sabre and flank companies were, it was regarded that they were more likely to get into hand-to-hand
fighting and therefore they were allowed to carry a beefier sabre, more of a fighting sword. However,
during the Napoleonic era, Rifles Officers started unofficially carrying sabres. The way
that rifles were often deployed in the field meant that very often they were more likely to come into
close combat with the enemy, or at least to not have close support of lines of line infantry
nearby. So therefore the officers, and there was a degree of kind of flamboyance and independence
about Rifles Officers as well, they regarded themselves as being a cut above, a little bit
more elite, a bit like modern commandos, and so they wanted to wear more fancy kit and have more
fancy weapons. The officers, for example, adopted very early on a type of jacket that was modelled
on hussars, cavalry jackets, and that was maintained right the way through most of the 19th century.
So Rifles, the Rifle Regiment, Rifle Brigade, what became the Rifle Brigade, and other, for example,
the 60th Rifles, had this sort of degree of kind of this mentality of being elites. So in 1822,
the brass-hilted infantry officers' sword came along, and initially that was the sword for all
foot officers, including Royal Engineers, including artillery possibly, although there's
some debate about that, and including Rifles Officers. However, already by 1827, so only five
years after this brass-hilted sabre came in, the Rifles Officers were demanding, essentially,
a sword specific to them, and they got it. So let's have a look at what they got. So what they
got was the 1827 pattern. The way you can recognise them, and the way that they're different from the
standard infantry officers' sabre or sword, is that they have a steel hilt. Now obviously,
a steel hilt is more prone to rusting, but it is stronger, so you could say that this is a better
fighting weapon. Now the blade is identical to the infantry officers' blade. This is the blade
that came in in 1822 for infantry officers and 1827 for Rifle Officers, and you'll notice that
it's a pipe-back blade, okay? That means that it's got a rod section at the back of the blade,
and then a relatively thin and main flat section to the rest of the blade. This sword, incidentally,
is marked to the 60th Rifles, or the King's Royal Rifle Corps, as they were also known.
And the blade has a pipe-back up the back, it's single-edged, and then for about the last 10
inches, it has what we call a quill point, or it has a sort of small yeoman, or false edge,
at the back, which can be sharpened. Okay, so the rod turns into a reinforced back edge.
Now the blade, as I've mentioned, the blade was common to both the infantry officers' sword and
the rifle sword in 1827. The only thing that really differentiates the infantry officers'
sword from the rifle officers' sword that we're looking at here is this steel hilt. There are a
few other differences with it as well. It also, as well as having a steel guard, it has a steel
backstrap here, and that is pretty much always stepped, okay? The infantry officers' sword
does have a stepped pommel, but the backstrap and the pommel are brass, and if I just grab the
infantry officers' sword again, you'll notice that the backstrap on the infantry officers'
sword has this sort of leaf decoration on the back here. The rifle's does not have that.
The rifle's one is smooth. The other thing to look for with the rifle sword is the emblem. So
whereas the infantry officers' sword, you'll see it has, in there, an emblem, which is, in this
case, it's always the monarch's cipher. In this case, it's a VR for Victoria Regina, so it would
be GR with an I and a V in the middle for George IV, for example. The rifle's does not have the
monarch's cipher there. Instead, it has the emblem of the rifle brigade, rifle regiment, or, in fact, that was also used for light infantry.
It's just there, and you'll see, let's just try and get it so you can see it more clearly. It's a bugle
strung up with a crown on the top, so the crown represents the, obviously, the monarch, and the
bugle, or perhaps powder horn, there's conflicting ideas about what that is, was the symbol of light
infantry or rifles. Okay, so there we are. That's the 1827 pattern pipe back rifle officers' sword.
However, that's not the end of the story. There was a change in 1845 when this, it's still known as
the 1827 pattern. You'll notice the hilts are fundamentally identical. They've got the same
symbol on them, they're both made of steel, they've both got the same similar, at least, grips and back
straps on them, but the blades are different. The original one, the 1827, is a pipe back blade, but in
1845, all swords in the British army, for officers at least, changed from the pipe back version
to what we call the fullered version, or sometimes known as the Wilkinson version.
It's known as the Wilkinson version because, allegedly, Henry Wilkinson designed the type of
blade and had it made regulation, first for infantry officers' swords in 1845, then in 1846 it was
adopted as regulation for naval officers' swords, but it seems that cavalry officers and artillery
officers also switched to the same type of blade, although there don't seem to be any records of when
that became regulation, or in fact, if it ever was regulation, they just followed suit. The reason for
the switch from the pipe back blade to the fullered blade was essentially one of strength.
The fullered blade is a little bit heavier, but it's much stronger, and actual fact, it's not a
new design. It's very similar to backswords and various cavalry swords that have gone before.
If you look at the 1821 pattern cavalry trooper's sword, for example, this is essentially the same
type of blade, and in terms of cross-section, it's no different, really, to earlier Napoleonic period
swords. So, you'll notice the length is the same. Rifles officers' swords are the same as
infantry officers' swords, which is usually 32.5 to 33 inches, and the fullered blade has what we
call a spear point, so you'll notice that whilst the point of the pipe back version, the point is
at the back of the blade, it's aligned with the back, so the back is a straight line, the point of
the 1845 type blade is spear pointed, that is, the two edges come together to meet in the middle.
This is considered better for thrusting. It's certainly more likely to penetrate heavy clothing.
Also, aside from the fact that the fullered blade is slightly beefier and heavier, and more robust
and stronger, it must also be said that it's more rigid as well, which makes it better for thrusting,
obviously. The pipe back blade tends to be quite easily flexed, and therefore not very good for
thrusting. And I would also argue that the fullered blade, the 1845 type fullered blade, is better for
cutting as well, because of the cross-section. The pipe back blade, being the shape that it is,
tends to pass into things and then meet a hell of a lot of resistance at the back edge of the blade
as the blade's passing through something, which is obviously not a good thing. Conversely, an
advantage of the pipe back blade is that you do have a very fine, a very thin edge. That means
it's more easily damaged, but you can get a very, very sharp edge, a very sharp blade.
So, there you go, that's the Rifles Officer's Sword. It should also be mentioned, if I just
put the pipe back one down, this model of sword, the 1827 pattern Rifles Officer's Sword, with
the fullered blade, so post-1845, is encountered very often. It's one of the most common models
of sword to find in British antique sword collecting. However, the vast majority of those
that you'll find are rifle volunteers, and they usually mark volunteer rifles, rifle volunteers,
on the blade somewhere. And that's because in 1859, 1860, the volunteer rifles movement started
in Britain, and huge numbers of local rifle brigades, essentially, volunteers, the equivalent
of what's now the Territorial Army, were raised, because there was essentially a foreign threat,
mostly from France, and there were very seldom political issues going on at the time as well,
so they started the volunteer movement. So a huge number of people volunteered to join
the volunteer rifles, and therefore there were lots of officers needing swords,
so the vast majority of these swords are from volunteer rifles. The more desirable ones,
in terms of collecting, are the ones like this, I don't know if you'll be able to see in this light,
no, you probably can, just about, you'll see it actually says Rifle Brigade, that means that's
regular army rather than volunteers. Equally, if we go back to the pipe back version, the pipe back
version predates the volunteer movement, so all of these, when you find a pipe back one, therefore
regular army, they're not for volunteer militia army, because that didn't start until after this
blade had been replaced, and in fact that blade, as I mentioned, is marked to the 60th rifles.
So yes, this model of sword stayed in use until 1892, when a new thrusting model of blade came
along, which I've talked about in previous videos. One other thing to mention, that you occasionally
encounter in collecting, is, so here's the standard post-1845 version of the Rifles Officer's Sword,
and what's this one? This one above is what's known as a leve, or picket weight sword,
that very simply meaning that it's the same, essentially the same sword, same material of
hilt, same emblem, same blade type, everything else, but it's scaled down, it looks a bit like
it's been made for a small person, and it actually is just a dress sword. Some of these are very
well made, this is actually a Wilkinson made one, with some interesting mottos on it, which I have
yet to research, but this one is pretty well made, but most of them are purely dress items,
and it is, you know, it is hardened and tempered, that is spring steel still, but fundamentally
trying to fight with this, good luck! Yes, you could use it as a small sword, essentially,
you could use it for thrusting, but it's a very light and dainty sword, and very essentially,
they were made for officers who had a lot of money and could afford to have a light, easy to wear,
light sword for dress and parade and evening functions, and an actual sword for carrying in
war. So there we go guys, that's the 1827 Rifles Officers Sword, one of the most common models
that you'll find, but most of them are for rifle volunteers, the ones as a mark to actual rifle
brigade or 60th Rifles or any of the regular army regiments are highly desirable. Cheers folks!
Thank you for watching, please subscribe and feel free to follow us on Facebook.
