SUPER Clean intake valves with this simple trick...

Autos hacks
81 followers
1 Video View·Jul 8, 2025
Hello it's Alimic. Have you start your car and notice a rough starting or lack of response when
accelerating? We all had that feeling after few years having our car, thinking that it was so
powerful when we first bought it and now it consumes more fuel and not giving us that much
power. So in this video, we will restore all that lost power and make it consume less fuel like it
was before. There are some other factors like cleaning fuel injectors or throttle body but
this video is not about them. It's about intake valves that look like this and not maintain it
or clean it. If you wondering adding fuel system cleaner will clean this, if your car direct fuel
injected, the answer is no. Because the fuel and the cleaner injected directly on the pistons and
has no contact with the intake valves. That's why it's called direct fuel injected. And with indirect
fuel injector cars, it will clean it because the fuel injectors spraying fuel on the valves and
washing it out every time spraying fuel. But it won't have a contact with the back of the valve.
So it's not gonna be like how I will show you in today's video. So for cleaning intake valves,
we will be using sandblaster just like professional garage. But if you take it over there,
it will be super expensive and I'm not talking about buying expensive equipment. I will be using
this sandblaster gun. Out of the box, it works like this but after some modification, it will
be working like this and this is what we want. So there are other ways for cleaning intake valves
with brush and cleaner but the process is a bit messy and you're not gonna get that result that
we are getting with sandblaster gun. So this is the valve that controls how much sand we want to blast
and I'm gonna change this nozzle tip to this eight millimeter tube which it will put me aside and not
be in the camera view. And here you can connect the shop air and for that I'm using a 50 liter
compressor but you can use smaller as well. And for cleaning, we're gonna be using walnut shell
and the size will be 0.4 to 0.6 millimeter. To keep everything clean and not make a mess,
I designed this adapter which will be placed on the valve port, suction all the walnut shell
while we are blasting with the gun. So if we don't have this, the valve port will be full
and the injected walnut shell not gonna hit the valve anymore and not cleaning. So if you don't
have a 3D printer to turn your design into physical object, here is the solution. This
video is sponsored by PCBWay. Think about PCBWay as all-in-one platform for CNC machining, 3D printing,
sheet metal fabrication and injection molding. If you are working on a custom design like me
and you want to have highest 3D print quality, this is the way to go. You just have to upload
the STL file here, choose the material and it will tell you the price and shipping days. PCBWay is
linked in the video description box below for more information. Thanks to PCBWay for sponsoring this
video. There are also companies that make these adapters for variety of cars and now it is time
to modify the gun. So we gonna need 5.5 and 4.5 mm drill bit. Remove the tank and also
this valve. Drill the tank with 5.5 mm drill bit and also here with the same size,
the valve with 4.5 mm drill bit. Now we gonna put it back and the opening is way better than before.
Putting back the o-ring and then sliding the tank. Tightening these two screws and we are done.
So for removing intake manifold on this Nissan Kicks, we have a bolt here, one here, here and
here and another one here and one in the middle. So removing intake manifold will be different from
one car to another. So if you guys wanna see a detailed video about this, let me know in
a comment section below and I will upload the video. Alright after removing the intake manifold,
there is only one thing you should know before cleaning. One valve will be open and we not gonna
clean that one and in this moment if we look it with endoscope camera, this valve is closed,
this one also closed and this one is open. So we not gonna clean this one otherwise all the cleaner
will enter combustion chamber and this one is closed as well. Alright this is the time we are
waiting for. Let's put the vacuum and the endoscope camera from the injector hole and then blast it
with walnut shear. Alright we gonna stop a bit. It's a good idea to move the endoscope camera so
we can see where have we missed and where doesn't need cleaning anymore. So here are the places we
missed and now we gonna clean these and we are done here. And here is how it looks now after
blowing some air and cleaning all the dust. Alright I'm gonna clean the camera and move to the next
valve and do the same procedure. Alright I just cleaned these two valves. I'm not gonna clean this
one because it's open until I turn the crankshaft to close it but now I will clean this one.
Alright I just cleaned these three intakes. Now I'm gonna rotate it from the crankshaft
till it close this valve and then we gonna clean that one. Alright this valve is closed now.
Now we gonna double check it and it's closed now and one of them will be open and in this case
this one is open. So I cleaned this one just like I cleaned these. Alright all the intake valves
clean now. Now I'm gonna double check it. The cleaning result like a day and night you will
never get result like this with any cleaner. It's almost like a brand new now. It's way better than
cleaning with a brush and cleaner. I also cleaned this surface where the gasket sits. Now I'm gonna
clean the intake and then put it back. The gasket in pretty good condition so I'm gonna remove it
and clean it only and it's a good idea to remove the throttle body and clean it outside since the
intake manifold is already out. It was a good idea to remove it because from the front you can see
it's clean but from the back there is so much carbon. So I'm gonna use throttle body cleaner
and spray it in the front and also in the back to clean all that. Alright throttle body back on the
intake manifold let's put it back. Tightening all the bolts and torquing to the manufacturer specced
again. So with the starting up you will notice right away because we have better airflow now.
Having carbon on the valves will slow the airflow and also create an air turbulence.
Even the throttle response is way better than before.
All the products and the tools I used in this video will be in the video's description box
below. Hope you guys found the video useful and learned something new. If it was like and
subscribe if you haven't already and I will see you in the next one. Bye for now.
