HOW TO CHECK FUEL INJECTOR RESISTANCE (OHMS) USING A MULTIMETER

Autos hacks
81 followers
59 Video ViewsยทJan 14, 2026
Welcome back to Top Fire Repairs.
This topic I want to show you guys how to test fuel injector resistance using a multimeter.
Take your multimeter and set it to 2000.
Next, take your test lead, touch it together, and make sure it is functioning.
When you test a fuel injector, the ohms reading should be between 10 to 18.
And the reading should be all similar.
However, if one reading is completely off, then you know that fuel injector is going to be faulty.
Let's test the first fuel injector.
So I have the negative test lead connected to one of the fuel injector prongs.
Now I'm going to take the other test lead and I'm going to touch the other prong.
And the reading is 11 for the first fuel injector.
As you can see, resistance is 11 and it is between 10 to 18.
So this first fuel injector is good.
Let's test fuel injector number 2.
And the reading is also 11.
So number 2 fuel injector is good.
Now test fuel injector number 3.
Number 3 is also good.
Let's test fuel injector number 4.
Number 4 is also 11.
So fuel injector number 1, 2, 3, and 4, the resistance reading are 11.
So since the numbers are all the same, these are good functioning fuel injectors.
There are a lot of reasons why you should test the fuel injector.
For example, if you are experiencing an engine misfire,
or you see excessive white smoke coming out of the tailpipe,
or you are getting poor gas mileage, or your engine is not performing properly,
those are the reasons why you should test the fuel injector.
I hope you found this video useful.
As always, thank you for watching and subscribe to HowFiberRepairs.
