How To Find & Prepare Bow Wood

Unraveling the Ancient Longbow
4 followers
5 Video Views·Jun 26, 2025
Welcome back everyone to the Organic Archery YouTube channel.
This week I'm working on a farm that's been completely overrun with hackberry trees,
so I thought it'd be a good time to film a video on harvesting, preparing, and drying bow wood.
This landowner was gracious enough to give me permission to cut as many hackberry trees
as possible from his land in a trade for a couple of custom bows.
So he says it's nearly impenetrable in the summertime, and they are choking out the
understory and killing all of the other native species, so he's going to be
basically clear-cutting these over the next couple years.
In my opinion, the best bows come from the lower six feet of the trunk,
and it is a bonus if you find a tree tall enough to give you more than one six-foot section,
but I try to shoot for at least six feet, preferably 75 to 80 inches.
That way I always have the option to build English-style longbows and also have some
extra material to sort of work around knots and imperfections when laying out the bow.
It's always wise not to cut, say, a 60-inch piece just because you want a 60-inch bow.
The extra length will open up your options, and I think you'll find it beneficial.
There are many good bowwoods out there, but to name a few would be hackberry, hickory,
maple, oak, walnut, and of course the famous Osage and yew trees.
But as a bit of a blanket statement, a good place to start is any hardwood tree with a
And specific gravity is just the wood's density in relationship to water,
so identify your tree, google its specific gravity, and know that if it's above 0.60,
it's probably a good candidate. But the only way to truly tell is to try to build a bow from it.
Trees of this size aren't all that dangerous and can even be felled with simple hand tools,
but I'm still going to work through my five-step tree felling plan. I'm checking the canopy for
anything that might fall on me. I know my escape routes, and I'm setting up a proper hinge.
Once you start getting into much larger trees, say 10 to 12 inch and above in diameter,
they can definitely kill you if something goes wrong. So trees like this are what I recommend
for beginners. They're just easier to cut, easier to transport, and they make excellent bows.
Even though these trees are small and relatively safe,
you will see it pinch my saw and get hung up in the canopy here.
Now I'm just going to clean up the end to make splitting a little easier and cut it to length.
Here's what I've cut so far, and it's everything from small two-inch saplings up to about six
inches in diameter. And the diameter is going to determine how many staves you get from the log.
Larger trees can get eight or more, and say four to five inches in diameter, you can get
four bow staves by quartering the log. And then the small stuff, it's best just to plan for
one good bow. But when in doubt, shoot for the lower number of staves. It's better to have four
really nice staves than eight ruined staves. And I lost a lot of bow wood in my early years
trying to get too greedy with my splits. Regardless of the size of the log, you'll
want to start by splitting it down the center. Simply drive one or two wedges into the end to
open up the split, and then leapfrog your wedges down the tree until it pops in half.
From there you'll have to decide whether you can get four or eight splits.
Sometimes if the log splits perfectly straight, but is right on the fence for diameter,
I'll try to maximize the staves by quartering it with my saw. But keep in mind this only works
on the logs that split really straight, and you're not going to want to mill anything that has twist
or snaky grain. This is what I managed to cut and split from 10 30 in the morning to
3 30 in the afternoon, and it's time to go home and clean them up.
There's been a lot of debate about whether or not the staves need to be debarked before storage,
but after losing my entire 2019 bowwood harvest to wasp larva, nowadays I just debark everything.
If you're going to leave the bark on, I'd recommend spraying it with diesel fuel or
some type of pesticide, but I don't like to use that stuff, so I just debark them.
And these staves are cut in the late winter, so the bark is still tightly adhered.
But if you cut your trees in the summertime, the bark will just slip off like a sock,
and you'll have a pristine back waiting for you underneath.
Regardless of the wood species, you'll want to seal the ends of the stave with something like
glue, shellac, or house paint to prevent checking, and date them so you can keep track of when they
were cut. For all of the whitewood species like hickory, hackberry, maple, etc., you'll be able
to use the growth ring directly under the bark for the back of your bow, but Osage Orange is
going to need a little bit of special treatment because the sapwood shrinks very rapidly and can
damage the staves. So here you can see all of my Osage gets chased down to an interior heartwood
ring, and you'll want to seal both the backs and the ends of the stave. But the whitewood species
don't typically have as many problems pulling apart when they're drying, so I don't usually
seal the backs. The drying time is going to depend on whether you leave it as a full-size stave or
reduce it. A full-size stave is basically just a quartered log and is going to require no less
than 12 months, and preferably 18 months to two years drying time. Here's a look at what I consider
a reduced stave that's been taken down to 1.5 inches thick and two inches wide, and this is
going to dry in about three to six months depending on your climate. And this is a bow blank that is
full width, so two inches wide, with about three quarter inch thick limbs, and this is going to dry
in one to three months. The bow making process can be sped up considerably using an artificial
heat method like a dry box or Keith Shannon and Thad Beckham's fire hardening method, but I'm not
going to cover that in this video. Just keep in mind that every shortcut you take does increase
your risk for damaging the stave. And with that said, I've got a truckload of staves to process,
so I hope you found this video helpful, and I'll see you next time.
