Learn how to make this vibrant and playful wreath using a Dollar Tree square frame and colorful deco tubing! This beginner-friendly project is perfect for any season and super affordable. I’ll also show you how to create a stunning handmade bow to finish it off. Great for crafters on a budget who want something cheerful and unique!
Square Dollar tree frame 16 packs of dollar tree tubing Ribbon or sign Ribbon 1.5in green embroidered ribbon 5/8in white glitter ribbon 2.5in Hot Pink Denim 2.5in Blue, PInk and yellow square ribbon
Thank you, to all my HWM YouTube Community for all your support and I will see you all soon. Thank you, HWM by, Lori.
Affiliate links for tools used. If you purchase i will get a few pennies for the purchase. About enough to buy a stick of gum :) It will not change the amount you made.
[Music]
Hey, I'm Lori. Welcome to my channel.
Ignore the mess in the back. That's just
Bella's area to lay. That's my dog.
All right.
So, we did one of these not too long
ago. I think it was like at Easter time,
but we actually did it with a round
Dollar Tree frame. This time we're going
to do it with a square one. So, it's
just using some of the deco tubing from
the Dollar Tree
and a square Dollar Tree frame. They're
so cute and they're so fun and so easy
and I thought it would be a great
project to do for the summer. So, this
is our square frame
and I have several different colors of
the tubing here.
This is by far one of the easiest things
to do.
So, you're just going to need the tubing
and some pipe cleaners. And we'll cut
our pipe cleaners in half. Okay. So, I
just fold them in half and cut them.
All right.
Now, all of these are from the Dollar
Tree. I think I have this one. Not
really sure where it's from, but I've
had it forever.
But you can get all different colors.
We're just going to kind of vary the
colors in here.
Look, we have pink and white, yellow,
purple, green. The pink is super cute.
It has a little bit of silver in it.
Metallic stripes in it. So, what I like
to do is kind of get the ends here.
I just kind of toss it in the floor. I
find this to be a lot easier.
I think I'm going to do like four
colors.
So,
now you can switch them up or you can
keep them together. So, what we're
really going to be doing is almost kind
of making like a bow
and then pull it up like this so that
it's like a little bundle.
Okay.
So, this is going to be about 20 inch
pieces.
Now, the last time I did this, I used
some um ribbon in it as well. This time
I kind of just want to do just the
tubing.
So I'm just kind of making little loops.
I do want some of these to have cut ends
because it just kind of looks cute and
adds to it. So I just find the middle
and these little loops are about about 2
in.
Then I'm just going to take my pipe
cleaner.
You may even be able to get away with
less than a half. But what I like to do
is fold it in half with my hands like
this and twist it nice and tight. That
way it's going to stand up. I'm going to
kind of trim these edges so they're kind
of all even.
Look how cute that is. Okay.
Now, you could vary your colors. You
could do all the same colors. There's a
lot of different ways you can do these.
Okay. And I'm just going to get 20 inch
piece again.
Then I just do
one loop, two loop.
Grab my pipe cleaner.
They also have blue.
I want my ends to kind of be the same,
so I just tend to trim them off. Okay.
So, you're going to make
quite a few of these bundles, and then
we're going to tie them on. So, let's
make a couple more and then I'll make
the rest off camera.
Just doing the exact same process. And
then I'll come back and we'll just put
them on our frame. Okay. So,
about 20 inches.
Okay. So, I just go like a couple inches
and then start my first loop.
Then just do my second loop.
Just like that.
put my
pipe cleaner right in the middle and
then pull it all up like this so you can
get it nice and tight.
Okay, let's do a couple more and then
I'll do the rest off camera.
So, this part doesn't have to be exact.
You just want it to be kind of close.
If you have pieces that kind of bend
like that, don't worry. It's going to be
pretty much hidden
inside here. It's not going to be very
noticeable.
So, don't worry if you have a piece
that's kind of squashed
because sometimes that happens.
Now, these are very stretchy, so you
want to kind of loosely measure the 20
in. One thing you can do is just get a
piece of cardboard and measure it out
and use that.
You can use your
measuring
mat like I do if you have one.
Okay.
Just like that.
Then if you have some that are sticking
up, just trim them off.
You don't need perfection here.
This is just fun and simple,
but it's going to look really cute.
You can also use ones that you cut off
to measure new ones.
There we go. So, I'm going to go off
camera and make
some more. And when I get done, I'll
tell you exactly how many I used. If you
run out of a color, don't worry. You can
just put in a new color and then you
just mix them in and it's going to look
totally fine. And sometimes they do get
kind of bent when they've been in a
package.
But again, don't stress too much about
that because you are going to be
twisting them and they're going to be
kind of gathered in together. So, it's
not going to be as noticeable.
Okay,
there we go. Okay, so I'll do the rest
of these off camera and then when I come
back, we'll put them together. Okay,
I've gotten a whole bunch of these done.
So, we're going to start putting them on
our frame.
We've got our square frame here.
This is super easy to do. All you have
to do is open up your pipe cleaner
and just put it right
tie it onto the middle
piece. Now, you could do there's lots of
options here.
[Music]
I'll kind of twist it around
a little bit.
just to kind of keep it nice and neat in
the back.
Or you can just trim it off.
I like to use the middle bar. You can
use the the
bar on the inside and the bar on the
outside. You can use all three. You can
alternate between the bars.
There's a lot of options with how to
make this work.
[Music]
And once I have a pretty good amount
tied on here, I can just trim off what's
left.
I don't need all that.
You see how cute that looks?
Okay.
Right. So, I'm going to do each section.
[Music]
So, there are one, two, three, four,
five, six, seven, eight sections on
this.
I'm thinking I'm going to need
probably between four and five per
section.
In the first section, generally, it
takes more.
And on these corner sections, you can
see they're a lot more. So, those are
going to take a little bit more. But
once you can kind of have a good amount
and you can't really see the frame, just
go on to the next section.
So, right now I have four over here, but
I still have to do this side, but I'm
going to do that towards the end. I'm
just going to go on to this next
section.
So, because this one is square,
I can do this last little part at the
end.
[Music]
There we go.
[Music]
So, I'm going to show you this little
section right here, and then I'm going
to do the rest off camera
because I'll just be doing the exact
same thing all the way around.
[Music]
As you go around and you get more on
here, it's going to take less per
section. So you could start with having
to do more and then you're able to do
less just because as they get on here
and they start pushing together
[Music]
then you won't have to do as much.
Okay. So so far I have three in this
section and I think one more is going to
do it.
So I think
about four to five in each section is
going to be really good.
So on the round frames, I generally do
about 36. I estimated I would need about
42.
[Music]
44 on this. Okay, so that's four. I
think I actually could use one more on
here.
So I think between four and five is
going to be pretty good estimate.
Now, I didn't take into account this
little thing. That's why I have a few
more I think might be required.
But once I get it all on here, I'll tell
you exactly how many bundles I made.
See, that's nice and full right there.
Okay. So, I'm going to do the rest off
camera. Then I'll come back
and show you what it looks like. And
then we'll talk about what you can do
with the center. But even just this
alone is going to be super cute. Okay,
so I've gotten the whole thing done.
Look how cute that is. So I ended up
using 46. So that was essentially 16
packs of these little deco tubings. So
that's around maybe $20. Then the frame,
of course, is $125. That's the back. It
still looks nice and neat.
Now, I want to show you some options of
what you can do once this is done. You
can leave it like it is.
You can put a cute little sign in the
center.
Look how cute that is. Isn't that cute?
So, that just says hello summer.
You can also turn it sideways
and put a sign like this on it. See?
Isn't that cute? I love that, too.
or you can do a bow. So, we're going to
do a simple bow. And I think we should
kind of turn it this way and have the
bow down here. We're going to make a
simple bow.
So, I want to do oh
about
a 10 inch tail. So, I just kind of
measure it out on my table
and then I'm going to dovetail it. But
first, I'm just going to pinch
where that 10 inches is. And what I can
do is I can measure from the zero
to the 12.
Pinch that and bring that in underneath.
So that is a 6 in loop. So you can see
again all you're doing is going from the
12 to the zero. Pinch it just like that
and then bring it across.
So you can see you don't have to have a
bow maker,
okay? You can pull them up in the middle
to make sure they match.
And then usually what I'll do is I will
just use the prior loop to check it. So
I just kind of come around,
pinch right there in the middle. You can
see they're the same size.
Okay. So
on the right side, we come across.
Okay,
just pinch.
If you have hands that hurt like me, put
it in between your thumb and your finger
like that.
There we go.
So, on the left side, you go under. And
you can tell just by looking at the
ribbon to see which way it should be
going.
I'm going to show you another way in
just a minute. Let's pull this one
across.
There we go.
So, I can see they match.
All right. Then I'm going to cut off
about 10 inches.
Okay. Then what I like to do, grab a
pipe cleaner. And I'm just going to go
towards the end of the pipe cleaner.
and just tie it around
just like that.
And then just trim this part off.
Then I can decide which tail I want to
move. Generally I move the one on the
top. There we go. So we have the start
of our bow here. Okay. So once we have
this done,
I'm going to go ahead and dovetail them.
So, all you do is pick it up, pull it up
like this. You want those wired ends
together. Hold it upright and cut at an
angle up towards that wired end.
That's a duct tape. If you do it like
this, you're going to end up cutting it
wrong. So, it's better if you just pick
it up in the air. So, we got the bottom
part. That's three loops at 6 in.
Now, let's do
let's do another one, but we're going to
do it a little differently. Okay. So,
what we're going to do is we're going to
take this and we're going to get a 20 in
piece. So, that's going to be our tail
in the back.
Okay. So, 20in piece. Let's trim that
off. That's our tail. Now, we need a
piece
that is
about
24 inches. But I will go about 25 in
just so I have an inch to meet it in the
middle. Okay.
All right. I want two of those.
So 25 in.
Okay. Right here.
So this is a different way you can make
it. This is our tail.
So I'm just going to take it, go ahead
and dubtail it. I kind of fold it all
together at once.
Do a dart tail.
Then I'll kind of pinch the middle so I
know where the middle is.
And then I'm going to
overlap these so that they're about the
same. So see how I needed that extra
inch. So
there's our inch.
That's about the middle. We just pinch
that up.
Okay.
I'll take my little pipe cleaner
and I can just
gather this together.
You can see where it's going to go. You
see there is our six inch loop. Okay.
So, if you don't have a bow maker and
you can't hold things in your hand, this
is a great way to do it. Okay. So, for
the second piece, we're going to do the
same thing. Just get your inch overlap
there. Find the center. And what you can
do to start out is just kind of mark the
center just by pressing down. And then
you can just kind of overlap right where
that is. So, you don't have to guess.
Okay. gather it. You can see
they're the same size.
Then we're just going to take these two
and our tail.
Gather the tail and all of this in one
pipe cleaner.
So, these pipe cleaners you really
aren't going to see once we get it all
together.
Okay, there.
So, we did two of this one.
So, you can see it already looks like a
bow. And when we put these two together,
you see how that's going to look.
Super easy to make.
Okay. Now, let's do we're going to do
one loop of this. So, let's do it the
same way that we did the last one.
Okay. Okay. So, we need
around 20 in for our tail. Just like
that. And then we need two 25 in pieces.
There we go.
I use this one to measure.
Okay. So, let's find the center point.
and just pinch it slightly. See how it
leaves a little dent.
Then we just take this
and we just overlap. So we put our first
piece there, our second piece there. So
you can see it's overlapping about an
inch. Just pinch it.
And I always go ahead and put a pipe
cleaner on this one just so I don't have
to try to hold it while I'm working on
the second one.
You're only going to need a piece of a
pipe cleaner. So, same thing with this
one.
Pinch.
Okay. Overlap.
Overlap.
Pinch together. And then I just bring it
all together.
Just like that.
Okay.
There we go.
So, now you can see what we're looking
like.
Isn't that cute? See how cute that is?
See, that looks just like a bow. Okay,
now I wanted to put a little bit of
white in the center.
This is a 5/8 inch ribbon. These are
really fun to work with.
So, what I want to do
is let's measure out
about 25 in.
We're going to do that twice. And I'll
show you why.
These are going to be tails.
So, we just need to find the center.
See, there's the center.
Okay,
there's the center.
Just like that.
Okay,
then we're going to do
I'm going to do three loops. So, I'm
just going to do this one by hand.
Okay. So I want about
a 4 inch loop. Yeah. So 4 inch would be
from the zero to the eight.
I'm just pinching it right here in the
middle.
Okay. And then across.
And what you can do is hold the two up
together to make sure they match.
Okay.
And I'm going to do three loops.
Just like that. Okay.
I just need enough to overlap here. Like
that.
Okay. I grab these two pieces.
Now we have our center piece.
Okay. Use our little pipe cleaner just
to gather it together.
Right.
Now, we can gather all these together,
and we're going to tie them together. I
like to use a zip tie. You can use wire.
You can use another
pipe cleaner, but zip tie is going to
hold it the best, and it's going to make
it easy to go ahead and
fluff it. So, I'm just going to set it
on the bottom, and I'm going to set
my ribbons right on top of it. And so I
have a great gathering point because I
have these
pipe cleaners right in the middle. So I
can just gather so that all of the pipe
cleaners are in the center on top of
each other. Then I'll just get my zip
tie started. I'm going slide it around
the back before I'm done and just kind
of make sure I've got all of those pipe
cleaners lined up.
[Laughter]
[Music]
I'm going to get another pipe cleaner to
put in the back. So, we need something
to hang from it or to attach it. Here we
go. All right. Tighten it as tight as
you can. Okay. I'm going to pull all of
my tails in the front. Don't Don't worry
about how it looks right now.
They all look a little messy when you
first get that zip tie on.
There we go. So pull all of our tails
down
just like that. This is part of the
fluffing process. So pull them down.
Then stretch out
your loops like this.
These three are pretty much going to
stay in the center.
Okay.
That
go. All right.
Now, we're going to fluff it.
To fluff it,
if you can see, they get kind of stuck
down in there with a little bit of kind
of fold over. You want to just pull
those out. And the easiest way to do
that is to kind of go back and forth.
This is why we use the zip tie. And then
get those little pieces out.
That way you can get it all nice and
fluffy.
There we go.
Okay.
But see, you never know that we didn't
use a bow maker or that we didn't
do something special with this. We just
made it all
with some folding
and some pipe cleaners.
These I want kind of standing up in the
middle like that.
Okay.
It's also a good idea to kind of do one
side and then the other. That way
you're really not going to
get lost. That's one way to have a lot
of trouble. Okay.
Now I can take a piece of this
about a 8 inch piece or so. And I'm
going to fold it in half. And I'm going
to put it right in the center.
And I'm going to tie it around. That's
going to hide the pipe cleaners and the
zip tie and all the little things. So,
just tie it like you'd normally tie
something.
Okay.
can trim that off.
And we have a really nice bow. Look at
that.
Okay. Now, on the tails,
the reason I like to have a couple extra
is I like to fold them up. So you can
use your I like to use my thumbs and I
just kind of put my thumb in here and I
just kind of roll it around my thumb
like this.
You can use a dowel
or anything that's round
that would be the size you want.
Okay,
there we go.
This just makes it look so cute. Okay.
And I'll do the green.
So that's why I don't dovetail those.
And I'm going to leave these
just draping down
there.
Oh, how cute is that? All right.
Yeah, that looks so cute. Okay. So,
we're going to put it on the corner
right here. Oh, look how cute that is.
So, I'm just going to take my pipe
cleaner and I'm just going to go right
in between all of these
and I'm going to tie it.
See, there's my pipe cleaner. I'm just
going to tie it in the
corner here.
I just think it's fun to have a little
bit of a different shape. Oh my gosh,
look how cute that is. That is so cute.
I like the little bow,
you know, but you could definitely do
like you could even do a bow and a sign.
You can do the sign.
But I think this is so adorable.
You have to tell me what you think.
All right, and I will see you in the
next video. Make sure to like and
subscribe. Thanks. Bye y'all.
[Music]