Thank you, to all my HWM YouTube Community for all your support and I will see you all soon. Thank you, HWM by, Lori. Find you when i will be live https://bit.ly/33x7Oyf
Affiliate links for tools used. If you purchase i will get a few pennies for the purchase. About enough to buy a stick of gum :) It will not change the amount you made.
[Music]
hey I'm Lori welcome to my Channel today
we're going to do something really cute
we're actually going to take some Marty
Gro mesh and we're going to use the
petal turned sideways so I've seen this
done by several people um namely Julie's
wreath Boutique and I thought it would
be really fun to try this with Marty Gro
ribbon so I am going to Wood burn the
edges of the Marty gr ribbon because
mash the Marty gr
mash and I'm going to burn it because
you want your edges to be really nice so
I'm going to pan down so you can see
what I'm doing okay so when you're going
to Wood burn you're going to need a wood
burner these are pretty inexpensive and
you need a tempered glass cutting boards
work fine uh just make sure they're
smooth
so what I do on my cutting board is I
Mark with a permanent
marker where my 10in
is so I want 10in
pieces and so I can just use that
Mark and with the wood burner you just
pull it down and let that wood burner
sends the edges as it's cutting it on
its way
down okay so you can
see how nice those edges are so that way
they're not going to fray because we're
going to be seeing the side you really
don't want to see those
frays so generally what I do is if I'm
going to make some projects with the
wood burning tool I'll just get all my
mesh out at once and go ahead and cut
everything and then I don't have to keep
pulling the wood burning tool
out just kind of saves a little
time I do like to keep my wood burning
tool in my hot shot because they will
burn everything in their path so be
careful so I'm going to cut up this mesh
and then I'm going to show you how we're
going to make this so these supplies
came from festive Creations by
Stephanie and there'll be a link for it
in the
description we're also going to use a
dollar tree wreath
[Music]
frame okay so I've gotten quite a few
done we're going to be
using the little 8 in frame from the
Dollar Tree this comes in a packet of
two and we're going to use some
small zip ties now you can use whatever
size you want these are about 6 in and
we're going to make a petal but we're
going to turn it sideways so you want
to take your two this is your Square
okay this is the factory Edge Factory
Edge these are the burnt
edges you want to
take one in the middle from each
side gather it up right so just like the
basic petal but what you're going to do
is you're going to put
one on top of the other and this is the
side that's going to
show all right so then all you have to
do is just gather it down here at the
bottom and zip tie it on so I'm going to
just kind of clip it while I get my zip
tie ready okay
but you can kind of pre-load your zip
ties so that it's
ready okay so the important thing is to
remember that you want to attach it so
that that side is
showing okay so I'm just going to slip
it in that zip tie I am using the middle
bar but you can see very important to
have that side
up
okay so I'm going to load a couple
in just so I'm not trying
to do it as I am putting them
on you could also use pipe cleaners if
you don't want to use zip
ties
okay right so petal right petal we
usually just kind of stretch it we put
two in the middle right so you end up
with almost like a leaf gather it
up fold one on top of the other so
you're basically twisting it to get it
on top you want them to lay on top of
each
other then just gather it right there
that little
Mount okay so see how I have it just
kind of gathered right
there okay
put it in tie it
on there we
go see how that
looks that's very cool with that little
Outer Edge there all right let's do it
again so all you're doing is taking your
pieces and put them in the middle gather
that
up flip it across okay this is just like
we made the petal recently
then you're just going to take this
little piece at the
bottom slip it
into your wreath make sure that side is
showing that side
part okay just push it over and clip it
off so you can see how it's got the side
part all right so let's do a couple
others and then I can do the majority of
it
off camera okay so bring the two pieces
in the middle together gather it
up push it on top so you can see the
factory edge here is what's showing on
our little curves okay who I forgot to
load
this don't forget to load your zip
tie or you'll be like me trying to do it
okay
okay I get a couple
on okay
so make
sure that side is what you want to see
and you want to see the factory Edge so
make sure that you have the factory edge
up and that it's that side
part then just tie your zip
tie okay flip it
off there we go we're just going to keep
going all the way around doing
this I'm not really sure how many how
many I'm going to need in a section I'm
kind of suspecting maybe like 10 but
we'll see so that's four of them okay so
you see if you have it laying like a
square you just take one end pull it in
the other end Pull It in kind of
overlapping each
other okay twist so you can make sure
you have that
edge that factory edge up then I just
kind of pull my finger
out put it
down all
right so the part we cut is actually
going to be on the bottom so you might
not really see it that much but it is
important that it's wood burned because
you don't want it to
fray oh that's pretty from the bottom
too
all right
so edge to
edge gather it
up flip it over that's your factory Edge
right there that's the one we
want just kind of pinching it in a ball
there and tightening it
down just like that and push it
over isn't that pretty that is super
pretty I think this is going to look so
cool like kind of feathers
maybe so let's go ahead and finish this
section and then I'll do the
rest and come
back if you want to put you can do this
on the
outside you could also do two layers but
I think I'm just going to do the one
layer and I'm going to do the
middle
okay see 1 2 3 4 5
six I suspected 10 so let's put one more
on that's because I have them going
sideways okay so there are one two three
sections okay
all
right
pinch pull across see we have that
little Edge
showing like
that this is even going to be pretty
from the
back
okay tie it on
then just kind of push it
over okay we'll do three more and then
I'll do the rest off camera all right so
meet in the
middle pinch
up pull across so see how you have that
little Edge right there see there's the
factory Edge and I just take my finger
out gather this into a little
ball and put it on
we might need we might need more than
10
so we'll get through this first section
so we can see how many we
need and
then I can finish the
rest all
right and I will tell you at the end how
many I
used I do have two rolls of this mesh I
just don't I don't think I'll use all of
the two
rolls
okay there we
go right I don't know it may be
10
okay over
we've got our little Edge right
there yeah I think 10 is good okay so
I'm going to plan on doing 10 in each
section and then we are going to cover
the
Center all right so I'm going to go and
keep doing this and then as soon as I'm
done I'll come back and we start
decorating
it Okay so we've gotten the whole thing
together look how cute that
is there's a lot of ways you could
really cover this Center uh you can
use you know
ribbon you could glue it on you could
weave it in
between but I just want to make this
super simple and just
fun so I just grabbed the sign that I
really like and I'm just going to put it
in the center I really just want to see
these little sideways flowers
pedals I just really like
this okay so I just got a Marty gr
sign and I'm just going to
take a metal hole pun
I'm going to punch the bottom and the
top okay and then just take some 26
gauge wire
I'm just going to take this
and put it through the
hole then I just meet the ends up just
to kind of double it up I twist it at
the base just to keep it on there and
keep it from
moving you could also use yarn in here
you could use use these little gold
balls and just put those
around you could use beads there's just
a ton of things you could do if you
didn't want to use a sign I really
wanted to use a
sign so this sign says beads and bling
it's a Marty gr thing I'm just going to
take the wire I'm just going to go right
in between the petals
here I'm just going to TI
it right here even from the back it
looks kind of cool right so it has the
gold you can see the gold a lot of the
gold from the
back I think it's pretty even from the
back there we
go you could cover the back if you want
to I don't really think I need to but
you absolutely can if you
feel more
comfortable belt Works ribbon
works so I've got it all tied
on all right so let's pull it up and
take a look at it so see it
covers all of that
mechanics
okay look how pretty that is isn't that
pretty okay so just kind of make sure my
sign is in the Middle look how cool that
is I love it with all these little
petals I just think these are
fun
okay so you may have to just kind of
move them just a little if they get kind
of stuck on each other
but it looks so cute I love this I think
this is just really fun and something
different to do okay so as I was taking
pictures I noticed something so I
thought I'd give you one more little
idea on the back it looks really pretty
so you can
actually so let's make sure they're kind
of lined up but we're going to put a
sign on the back and make it
a reversible okay so I'm just gonna
punch a hole in the
side okay and I'm going to add some
rustic wire onto this as a hanger so I'm
just going to get a piece of rustic
wire okay this is going to help me
figure out where to put that sign so I
want to make sure I have it on
the top so I'm just going to kind of
twist it around itself
here
okay so I'll know the top of my side
needs to be up
here all right let's make sure we have
it in the right
place okay right there all
right then I'm going to take some of my
26 gauge wire
so if you even if you had a glass door
this would look really cool because it
would look like a completed design from
both sides you could also hang it
somewhere in your house so that you
could see both
sides
okay right so I do have a different
sign I
wanted more like greens and purples on
this side
really both sides kind of have
that but this has some gold in it so it
will kind of bring that out we do have
multiple signs from Marty gr so just
kind of look to
see what you could find okay let's check
one more time yes all right so I'm going
to kind of move it so I can see a little
bit of what I'm doing I'm going to get
both ends started before it gets tight
so that I'll be able to continue
it there we go okay all right so see
it's going to fit right over that
frame I can just kind of run it around
the
bottom I'm going to get one side done
pretty
well
okay there we
go okay then I'm just going to tuck that
wire up under the
side keep it in
place all
right okay and then with this
one tighten
it okay and make sure it's on there
tight all right put it through one more
time you could even tie it on the sides
just to keep it tight so it won't move
I do think it will stay close
enough but look at that okay let's look
at it so this is the
back this is the front Okay so even if
you had it in your house and it was kind
of spinning back and forth that is
really cool that's really fun so that's
kind of a fun thing to do with kind of a
design like this so I hope this gives
you some ideas or some something so this
would be really cool if you had this on
a glass door and you could see this from
the back and then this from the front
all right I hope y'all enjoyed this make
sure to like And subscribe and come back
and hang out with us when we're live
next thank you so much for watching I'll
see you soon bye
y'all so I did record just a tiny little
video of it hanging in my hallway so you
can see how you can make it and use it
reversible
[Applause]
[Music]