Transform Dollar Tree Vases: 5 Cozy Fall & Christmas DIY Ideas

Cheap and easy decorating tips
92 followers
Today we are taking Dollar Tree's glass vases and giving them a seasonal makeover.
I'll share a few quick DIY hacks to create beautiful fall decor that can carry through
the Christmas season, all while staying on a budget.
For the first DIY, I'll be using a couple of Dollar Tree's cylinder vases.
They have about 3 different sizes and I'll be using the 7.25 inch and the 10.5 inch ones,
which by the way was $3.
I'm going to share some quick and fun ways to decorate these for fall or even Christmas
using just a few Dollar Tree supplies.
So for the supplies, I'll be using several packs of these faux acorns from Dollar Tree.
I grabbed a couple packs of the red and the dark brown ones and they each came in a pack
of 10.
I'll also be using a couple of wired garland berries and two of these 5 inch LED pillar
candles, all from Dollar Tree.
Now I'm going to show you a few different ways to style these and for this first one,
I'm going to wrap one of the garlands around a pillar candle.
Then I'll slide the candle out and drop the garland right into the larger vase.
If you want it to look fuller, you can always add another garland and I think that would
look great too, but since I'm only using one, I stretch it out a bit so that it fills the
space more evenly.
That way, it still looks full without needing an extra garland.
For the smaller vase, I'm doing the same thing, wrapping the garland around the candle and
it coils really nicely.
Since this vase is shorter, you can trim the garland down if you'd like, but I'm going
to leave it as is.
Then I just drop that into the smaller vase.
I'm really liking how the vases are turning out so far.
I just pop in the pillar candles and this one's done.
To add a little extra, I'm going to drop in some of the acorns, mixing up the colors for
a nice blended look.
This is going to be the base that the candle sits on, so I am careful not to overfill it
because I don't want that candle sticking out on the top.
For the taller vase, I add a few more berries to make the candle sit a little higher.
And just like that, this one's complete.
Now for the next option, I empty out the acorns and instead, I push that coiled garland all
the way down, letting the pillar candle rest right on top.
I love how that looks too.
You can definitely double up the garland in the taller vase to give the candle more height.
It's super easy but adds such a nice touch.
For this next DIY, I'm using a couple of Dollar Tree's cylinder vases.
One is 6 inches tall and the other is 7 inches.
I'll be painting the vases and using these tree silhouette stickers to create a lovely
see-through effect, which will give such a cozy autumn feel that you can enjoy all the
way through Christmas.
Now, I did cut these out on my Cricut and I actually just uploaded the images from Canva
and I just resized them because I didn't want them to be all uniform.
I'm using pine trees, but you can use whatever shape you like.
Now, I did cut these out on a Dollar Tree sticky vinyl using my Cricut, but you can
also trace out some simple tree designs and cut them out with scissors as well.
I'll be placing about 10 trees on each base and so I just peel them off and place them
on the base.
I did mention that I didn't want the trees to be uniform, but I also didn't want the
bottoms to be placed all on the same level and so as I'm placing the trees, I just place
them in different heights.
Some higher and some lower and I really liked how that looked.
Now, since I'll be painting these, I did make sure that the vases were cleaned free
from grease or smudges.
I did wash them with soap and water.
You can also wipe them down with some rubbing alcohol.
For the paint, I'm going with Waverly chalk paint in white and I decided to mix in a few
drops of sandstone from Waverly to give it a bit of warmth.
The white alone is beautiful, but adding the sandstone gives it a very subtle, creamy tone
that feels perfect for fall.
You can totally customize this part depending on the look you're going for.
I'm using a round sponge brush to apply the paint because it really helps give that great
coverage and smooth, even finish that I like.
The pouncing technique works well for this because it helps the paint get into all those
little details, especially around the tree silhouette.
You want to make sure every part of the vase and the tree is fully covered so that you
get a nice, crisp silhouette when you peel that vinyl off.
I'm sticking with a soft, almost white color, but I think this would also look amazing in
some rich fall tones, deep browns, burnt oranges, or even a mustard yellow.
And if you're thinking ahead to Christmas, dark greens or burgundies would really make
this pop.
So many options to play with here.
Alright, so once the vases are fully painted and the paint has dried, it's time for my
favorite part, peeling off the vinyl.
The vinyl comes off so smoothly and I just love how that tree silhouette reveals itself
underneath.
Look at how stunning that silhouette is.
Such a simple process, but the result is really pretty and it gives a vase a very cozy autumn
feel.
For the final step, I'm going to place some LED pillar candles inside to finish it off.
You could also add some fairy lights or fill the vase with seasonal accents like acorns
or pine cones for a different look.
For this project, I'll be using a couple of Dollar Tree vases, a cylinder vase, and a
round glass bowl.
I had this idea to decoupage some pressed flowers on the outside of the glass and so
I went on a hunt for fall themed flowers and leaves and after searching, I found the perfect
ones on Amazon and I have to say, these are really, really nice and I'm super happy with
the quality I got.
I opened up this one pack that had such gorgeous fall colors, mustard yellows and burgundy
and burnt sienna and I thought I'd stick with just this pack because it was more than
enough for this project, but I couldn't resist peeking at what was in the other packs and
wow, just look at how beautiful this one is.
I really love the earthy tones and I could also see some greens in there and I really
wanted to add some of that as well.
So after sorting through and picking out the flowers and leaves I wanted to use, I had
a couple of options for Mod Podge.
These are from Dollar Tree and I had both a gloss and a matte finish, but really either
one would work just fine for this project so I just ended up going with a matte finish
because I think that will give a softer, cozier look.
To apply, I tried a few different methods, but I started by applying a good amount of
Mod Podge directly onto the glass.
Then I applied a leaf right on top of that and gently brushed more Mod Podge over it
to seal it in.
Next to that, I added a beautiful yellow leaf following the same steps and I just continued
with that pattern all the way around.
Now I gotta admit, this was not as easy as I thought it would be.
That round shape of the bowl made it a little tricky to get the leaves to stick right away,
especially along the curves.
Plus the leaves are a bit denser than the flowers and a little more stiff and so I just
brushed on some Mod Podge on the back of the leaves as well as on the glass to make sure
that they adhere properly.
So I just keep working my way around the vase, alternating the leaves until I have it completely
covered.
Now I could stop here, but I noticed a few empty spots that could use a little something
extra.
So I decided to fill those in with these small yellow flowers, placing them in areas that
I thought needed it.
Once I was happy with the placement, I went ahead and brushed Mod Podge over the entire
bowl just to seal everything in and give it a smooth, even finish.
I'm going to be Mod Podging these large green leaves.
I really love the size of it.
The cylinder vase was definitely much easier to work with and getting the leaves to stick
was super easy, so this part was really fun.
I followed the same process, applying Mod Podge on the glass, placing the leaf on top,
and then sealing it with another layer of Mod Podge.
In between, I'm adding these brownish coppery little ferns.
For those, I just pressed them into the Mod Podge and since they stuck so well, I decided
to hold off on sealing them right away.
I figured I'd wait until everything was in place before giving the whole vase one final
coat of Mod Podge.
Towards the bottom, there were a few sparse areas and it just looked like something was
missing, so I filled those in with some more greenery.
I feel like those little leaves just tied everything together.
Once I was satisfied with the arrangement, I gave the entire vase a final coat of Mod
Podge to seal everything in.
And once it dries, you will have this beautiful, lightly frosted stained glass effect.
I drop in some Dollar Tree pillar candles and this DIY is done.
The pressed flowers are so stunning, especially against the flickering candles.
I really love how this turned out.
For this project, I'll be using a couple of Dollar Tree's cylinder vases.
The large one is $3 and I'm going to be decorating them with these beautiful gold
leaf decals from Dollar Tree.
These are really beautiful.
Aside from that gold design, I love that the sticky area is transparent, so I just carefully
peel off one of the stems.
It is quite sticky and I just lay that vertically, kind of at an angle on the smaller vase.
It does help to press down in the center first and then press out towards the leaf and just
smooth out any bubbles.
So yeah, I like how that looks so far.
Now to make it easier to peel, which I forgot to do earlier, I remove that liner that surrounds
the decal.
And this will make it a lot easier to remove that decal.
And I can place about two stems on the smaller vase.
And so I place a second one on the opposite side, a little bit higher, closer to the top
and also at an angle.
For the larger vase, I do the same thing, but this time I'm angling it a little more
just so I'll have a little more space because I want to put all four up.
But you know what?
After sticking that first one on, I actually really liked how that looked just like that.
So you can definitely leave it just like that and place the Dollar Tree's pillow candle
inside.
Okay, continuing on.
So now I'm on the second pack.
I'm just placing that second stem on the opposite side where I put the first.
So it goes all around the vase, angling it up a little more just so it looks like it's
winding upwards.
For the last two, I thought I would place it starting from the top, facing downwards
this time.
And I thought it fit together nicely positioning it this way.
So just make sure to smooth it all out.
This is perfect for fall and can definitely last all the way through Christmas.
A while back while I was at Dollar Tree, I saw that they had these metal gold leaf candle
holders and I thought it was just perfect to place their cylinder vase in.
My only regret was that I only got one.
I wish I had a pair.
But look how beautiful this turned out.
I really like it.
It was so quick and easy.
You can definitely paint a candle holder if you like, but honestly, I really like it just
like that with that warm gold finish.
Hey, thank you so much for watching.
Make sure to give it a big ol' thumbs up if you liked it and don't forget to subscribe
for more DIYs.
Until next time, bye!
