15 in-work wreath 21in deco mesh Navy Metallic deco mesh- 21in deco mesh red and white striped deco mesh- Ribbon 1.5in White glitter ribbon 1.5in Blue Glitter ribbon 2.5in Red white and blue stars ribbon- 2.5in Red with white polka dots ribbon-
Thank you, to all my HWM YouTube Community for all your support and I will see you all soon. Thank you, HWM by, Lori. Find you when i will be live https://bit.ly/33x7Oyf
Affiliate links for tools used. If you purchase i will get a few pennies for the purchase. About enough to buy a stick of gum :) It will not change the amount you made.
[Music]
hey I'm Lori welcome to my Channel today
we're going to do something really fun
we're going to be doing the poof curl
with the 21 in mesh so I have a navy
blue and I have a red and white stripe
and we're going to be using um a red
work wreath so this method uses about 15
in pieces and so that's what we're going
to cut if you don't have a work wreath
you can use a dollar tree wreath just
put tin Ties on the bottom and eight
Ties on the top okay so here's our
mesh and I put them on my mesh roller
and I rolled them out
together and then I'm going to cut 15in
pieces
[Music]
okay so once we have our pieces cut
we're going to get our frame
ready you want to spend a minute just
opening up your ties you don't want to
have to do this while you're trying to
put it on the wreath okay so you can
take two of your 10in rolls if you don't
have a 21 in one and just tape them
together
so this works great if you don't have a
21inch
roll because you probably have a 10 inch
if you don't okay there we go so you can
make
one or you can keep one so it doesn't
really matter now you don't have to have
this this is just kind of a little thing
that
helps with this just helps a little bit
if you kind of struggle with doing
this so you take your
roll okay and you're going to take your
mesh put your mesh
inside okay you want the loose the you
want the center to be loose and the ends
to be tighter so kind of tighten at the
ends and not the center okay so you see
how my Center's kind of bubbling up like
that but my ends are a little bit
tighter okay and what I can
do is start to push it through now I
like to use my tool but you can use a
clip so let's do that on the other side
you want about 4 in and what I can do is
go ahead bring
my wreath frame up here and go ahead and
tie this one down
pull this
out okay go to the next tie tie this one
down so look we're looking about four
in now you should have this bubble in
the middle and what you're going to do
is just gently put your hand in there
and pull it out into a poof it doesn't
have to be all of it you just want a
poof okay so let's try that one more
time and then I'll show you without
using
this and let's show you what the Clips
all right so just roll it at the ends
like
this pull some
out get our little 4 in we just clip
that okay so I got about 4 Ines here put
it down okay so put it
down put this one down
that
okay and then pull this
out so you're not going to be able to
pull it all out and that's okay you
don't need
to you just need to get enough to get a
poof like that
okay all right let's do it without the
roll
okay so I'm just kind of rolling it up
just letting it do its
thing
okay place it
down so you see how
um going to the next one and placing it
down
and
then I'll pull
out my poof just like that okay so I'm
going to do this all the way around
alternating let's show you one more so
let's do one more and
then then we can get it
ready
okay there we
go all right
there okay and
there
okay and then pull this in the center
out just like that
so what you're going to have is two
curls in the same tie and then a poof
and then two curls in the same tie and
then a poof I put this one over too far
because I wasn't really sure where it
was going to go so let me show you just
so I want to make sure that's
clear so two
curls in the same
tie and
then you put your poof down
all right so then when you go to put the
next one you're going to put the blue
curl here then the poof then the curl
all right so you're kind of stacking it
on top of each other and so that's how
you can do it so that it'll fill up the
space
nicely all right so I'm going to keep
going and then when I come back we'll
start on the top
[Music]
okay so I got the bottom done so now
we're going to do the top so we need to
open all these ties
up and let's go through this process
again just to make sure it's
clear
okay so you have your 21 in
roll you're going to have 4 in curls on
each side and about a 8 in poof in the
middle so you just
Loosely roll it so you don't want it to
be real tight because you want to be
able to pull the middle out it's really
not going to come apart if you only hold
one side I don't think I made that clear
okay so you put the 4 inch roll down in
your tie
okay tie it I just tie it one time you
can go back in your tie or you can tie
on top of
it right and then if I don't feel like
my curl at the other end is Curly enough
I'll just kind of curl it a little bit
before I put it in but I don't want it
to be real tight because then I can't
get the center out pulled out okay so
tie it on the other side so the poof is
in the middle
oh and one thing I didn't specify make
sure your opening is at the bottom so
you'll be able to pull your poof
out okay
so lightly curl so I basically curl it
from the ends like
this if you want you can put a clip on
it you can put your tool on
it now you're going to go back into the
tie that you just
left okay so open that up where the curl
is and you're going to go right across
where the poof is but then your curls
are basically going to be like this
okay and then you're going to go to the
next tie making sure that opening is
down facing down so that you can open
that poof
up
okay all right and then you just pull
out what you can don't stress out if you
can't get it all out that's
okay it doesn't have to be
perfect okay there so you see how you
have the poof and the
curls
okay all right let's do one more and
then I'll finish the
rest okay
okay so roll it from the
ends
okay open up the tie that you just left
the last one you just
left put that one
in make sure you're opening is at the
bottom and then put your other tie in
the next
piece the next available tie and
then pull out your poof and remember
you're not going to be able to get it
perfect that's okay it doesn't need to
be perfect you just want to see the poof
okay all right so I'll finish this and
then I'll come back and show you what it
looks
[Music]
like okay so I've gotten two layers on
you can see it looks great I actually
still have mesh left so I'm going to put
a third layer
on I'm just going to go right on top of
what I've already made I'm going to go
opposite colors I just think that's more
fun so I'll start the red and
white
here okay
all right and then there'll
be let me show you there'll
be a red and white poof a blue and then
a red and
white okay just to kind of break it up a
little and what this does is this is
going to make it bigger and Fuller and
really kind of cover it you don't have
to do this but I like to do that third
layer
so it's the exact same
process go into the tie you were working
on tie it
down make sure the bottom is
down go to the next tie tie it
down and you want to pull this top one
to the middle and then then this one
will be at the
top just like that
okay there we go see how pretty that is
and you see the row of
poops okay so I'm going to finish this
up then I'll come back and show you what
it looks like
[Music]
okay so all done look how pretty and
full that is so look how pretty that is
isn't that pretty and you can see how
full it is you can see the little curls
and the poops all right now I'm going to
tell you what's really great so I used
13 15 inch 15inch pieces of each one of
these okay and then I was able to take
the rest of the roll and make another
wreath doing the Jackie weave so I did
both the Jackie weave and the poof curl
with two rolls of mesh so 21in mesh is a
little bit more expensive but if you do
the right method you can make multiple
wreaths out of the rolls okay
so you have to tell me what you think
Okay so we've gotten the whole wreath
done so now we're going to add some
ribbons on and a sign I love this sign
so this has the navy blue in it so I
really wanted to kind of stick with some
navy blue
colors okay so I have a red and white
polka dot and then I have red and white
with the blue and the stars I have a
Navy with glitter and then a white with
a little glitter as
well so we are going to do 12 in ribbons
I'm going to do nine of
each okay so I'll do two together using
my
comb I like to use this just because it
makes it faster for me to measure
out okay
so from here to here is 12 in so as I
keep going around I'm just doing more
than
one so that's four
five
six
7
8 and
nine okay so that's half
all
[Music]
right then I can just cut it at the top
and the bottom and that'll give me the
individual 12 in
pieces I do want to dovet tail
them so I'm just going to fold them over
and cut upwards towards the wired
Edge and I'll do this for all of them
and then I'll come back and we'll start
putting it on okay so I'll take two of
the ribbons together fold them in half
find the
center and I'm just going to pinch it
right down the
middle get a little bit of curve under
it these are wired ribbons then it's
going to come and put it right into the
tie and then I'll take that tie and kind
of just twist it
down okay
I can spread out my
ribbons like
this
okay right and then I'll switch to this
two and I'm just going to alternate all
the way
around
okay so I just go to the next
tie put this one on
okay spread these
out
okay and then the next one and I'm going
to do this all the way around just
[Music]
alternating so I'm all the way around
the bottom so now I'm just going to do
the same thing on the
top so just take find the center
C pinch and then gather in the
center get a little curve under
them place it
down twist my tie in and then I'm going
to spread it out so I'll do more like a
crisscross on the
top just because there's more room and
it's easier to see the ribbon
so I'm just going to do the same thing
all the way
[Music]
around okay I've gotten all the ribbon
right around the
top so now we can see what the sign will
look like so we can put it here we could
put it in the middle if I put it in the
middle I generally don't do a bow but
I'm thinking we might do a really pretty
bow and put this on the
side we also have these sign
options I kind of like that one
and then we have that
one I think I kind of like this one and
then maybe we'll save this one for
another one this one's a little bit
brighter okay so we'll just bunch a hole
in the bottom and the
top
okay just going to get out some 26 gauge
wire
okay so I cut about a 20in
piece just run it right through the
hole then I just kind of twist it on to
keep that wire from moving
I do kind of double it up so I just put
it
through and meet the
ends just to give it a little bit more
strength okay we're going to put it over
here on the
side I can use one of my plastic weaving
needles I just kind of put the wire in
it like I'm going to sew something bend
it over so it'll stay on and you can
push it right down through the mesh so
that's why I really like it so then you
can see it's right there I can pull it
up
then I
can twist it around the frame and just
get it on there nice and
secure all
righty there we go
get it all nice and
tight
okay if I see any
little straggling mesh pieces I'll just
kind of cut those off there won't be
very
many
okay that's
it
okay all right and then
put it down the other
side same thing just get it loaded
on okay push it down to the
mesh there we
are now
just tie it
[Music]
around Trim It Off
there we
go okay so you want your sign to be on
here snuggly but kind of floating you
want to be able to get your hand under
it you want it to be floating on there
so the red kind of stands out the best
so we're going to put that on the
bottom okay so let's
do about a 16inch tail first we're going
going to dovetail it just like we did
with the
Tails or the streamers whatever you call
them okay we're going to put it sideways
down in our bow maker and we're going to
twist so you can see we have the wrong
side of the ribbon
up okay and then I can put it down
sideways going across to bring the right
side up then you twist so this side will
stay nice and this side will have the
ugly
side you want to do the same measurement
on both sides you can use your finger to
hold it at
that 6 in is what we're
doing then I usually just measure it
against the loop I just
made okay
there we go so we're going to do three
loops with this
one
okay then we just want the
same size tail on that last one you
don't need to twist it because you're
just coming straight out so there's no
need to twist the
ribbon so twisting it on the bow maker
just helps you get a much fluffier
bow okay then we're going to go in
and let's do our
blue okay so about 16
in this time we're going to do two
Loops so same length 6
in
okay and same process see how we have it
the ugly side down bring it
around so you're kind of
lifting it around to get it back to the
side you
want and then pull it out trim it
off there we go can stretch these
out all right then we're going to
do one loop with the
white okay there we go
all right so we're only going to do one
with this
white
okay there we go pull it
out trim it off all
right now we're going to do a whole
second layer with a little bit smaller
Loops using the Stars
ribbon okay
all right so these stars are right in
the middle nothing you have to do
special because this is just a
straightforward pattern so we're going
to go just a little bit smaller maybe
about 5 and 1/2
in and since it is kind of hard to see
the board from here what I can
do is pull these two up and see if they
are matching if they are then I'll just
keep
going
okay so this is either yeah this is
about 5 and A2 Ines I
think so just slightly lower just so we
can kind of see what's behind
it all
right there we go all right so
same length
tail all
right so what we're doing is a 32
one okay so three at six two at six one
at six then three at 5 and a/2 two at 5
and 1/2 one at 5 and a/2 and we're kind
of switching up so we're going to do
this time we'll do two loops with the
white and one loop with the
blue
okay and it's going to be the
length that our stars are so about 5 and
1 12
inches
there and
there trim it
off okay and then the last pit we'll put
in is the
blue so just one blue on the
top I really like that because it has
all that pretty glitter on
it okay then I'm just going to run a zip
tie underneath
it
okay and then just get my zip tie
started so I'll just wait for it to
click and then I'm going to pull it out
of the zip tie with that now it might
tighten it a little more and that's okay
so there is our indention that we had
from the bow maker so you want to hold
one side and slide that zip tie around
because you want that part to be in the
back then you can just kind of make sure
that it stays in that channel the bow
maker made because that's the
measurement that you want your Loops to
be
at and I usually just kind of check real
quick just to make sure
nothing is out of where I expect it to
be so I'll just kind of look around
I'll grab a pipe cleaner for the
back you want to get the pipe cleaner in
before you completely tighten
it all right then tighten it really
good all right then before I do anything
I'll pull my Loops
out this helps to get things to where I
want them to
be and I don't have to fight with it
when I'm ready to fluff it because I
already have them where I want
them this only takes a minute and it
does really help with
fluffing so just take a minute to get
your Ribbon where you want it to
be and it is okay to really kind of pull
things apart because they will get stuck
together in that zip tie stuck down in
that zip tie all right so once I have
them P
out I'm just going to hold it by
everything in the back and I'm going to
start fluffing so I'm going to twist it
back and forth just to loosen it from
that zip tie and then I can really get
my hand in there and fluff it
out there you want to do one side and
then the other don't try to
do going back and forth because you will
get lost and then you'll have trouble
with making your bow look the way you
want it
to if you're having trouble with your
bows that might be what's
happening as well as not fluffing it
out you see how nice and fluffy that
side got you see
that
okay so we're do the other side
now when you've been making bows a while
then you can go back and forth and it
won't be a problem but if you're if you
haven't been doing it a long time it's
just a better practice to go up one side
and then down the
other or up the other I guess it really
is there you see how nice and fluffy
that
is okay now I can clip off that zip
tie cuz I don't need that
just the extra tail of course I leave
the actual zip tie in
there then I can bring this back over
and I want to kind of just set it across
from my sign and then I'm just going to
go around the
frame so see I have it right
there
okay I'm just twisting it around the
frame
that okay
now now I can kind of handle my Tails
here also make sure everything is still
where I want
it okay I can run my hands
under the 2 and 1/2 in and just kind of
have it curl
under and then with these with these 1
and 1/2 inch what I generally do is curl
it using my thumbs so I just kind of put
my thumb in and walk it up it's pretty
loose around my
thumb okay like this
okay and then just pull it out
Loosely okay and you get that pretty
little
curl all
right there we go
oh
pretty last
one right then I just kind of just make
sure all my Loops are where I want
them yes you can
see that looks so cute see it's right
across from our
sign okay so let's take a look at it and
there we go look how pretty that is oh
there's our bow look how pretty that bow
is there's our
sign oh I'm on the other
side
okay oh that is so pretty I love that
see that
pretty see the bow the
sign look how pretty all of that
is so that is the poof curl method with
a 21 in mesh I hope you enjoyed this let
me know what you think and be sure to
subscribe and like and leave me a
comment let me know what else you would
like to see all right and I hope y'all
really enjoyed this I sure enjoyed
making it thank You' all so much for
watching I'll see you soon bye y'all
[Music]
oh