Thank you, to all my HWM YouTube Community for all your support and I will see you all soon. Thank you, HWM by, Lori. Find you when i will be live https://bit.ly/33x7Oyf
Affiliate links for tools used. If you purchase i will get a few pennies for the purchase. About enough to buy a stick of gum :) It will not change the amount you made.
[Music]
hey this is Lori welcome to my channel
so right now we're going to be doing
poof wreath with the 21 in mesh look how
pretty this mesh is this is beautiful
and you really can make a wreath with
just one 12
in 21 in mesh and it's going to look
nice and full so you're not going to
have to cut anything
so this is a really easy one to do
because all you're going to do is poofs
all the way
around so I usually open up my ties
first just to make it easier so if
you're not using a work wreath you would
do 10 Ties on the bottom eight Ties on
the
top I like to have three zip ties to do
this so what what you're going to do is
you're going to take your
mesh I have mine on my mesh roller and
you're going to gather it at the end so
just gather
it okay like
that then you're going to pick a place I
like to start on the bottom it's okay if
you start on the top either way I will
take one zip tie and I will tie it down
right
before one of these ties
and I won't use that first tie until I
come back around so just tighten it
down you're not going to see this it's
going to get
covered now when you're doing a poof you
want to make sure that these Factory
edges stay underneath so I usually just
push them underneath like this and then
I make my hand into a little
claw that way I can keep them under
there and instead of measuring I'm going
to go to the first tie to the second tie
and then back to the first tie okay so
that is about a 10
in poof okay so that's about what I
want okay and then I'll just spread it
out see how pretty that is okay
again one two and
back if you feel more comfortable
measuring you absolutely can I just
don't like to take the time to do that
so I'll just do something like this
where I just kind of use the wreath
itself
okay spread it
out and you want it to do all the these
little curly things so that's totally
fine
so I'm just going to keep going around
doing the same
thing and then I'll show you how we go
up to the
top so I've gotten back to where we
started so you see there's our zip
tie so now I'm still going to go across
to measure and then when I put this down
in this tie in this tcil
tie and spread it out you can't tell
that's where I started okay so to start
on the top I'm going to open the top
ties I generally move the bottom ties
down a
little there we go and I'm going to take
this
mesh and I'm going to pull
it to the top to the closest tie I can
find okay so if you were going from top
to bottom it would be the same thing you
would just be going to the bottom I like
to take a zip
tie and tie it down just so it doesn't
have any little lumps under
there there we go
okay so now I want to make sure all my
ties are
open okay so just like the bottom I'm
going to skip the first tie here and I'm
going to go over to the second tie just
like on the bottom and come back to the
first tie
okay and then spread that
out so same thing all the way around
may be kind of hard to tell but this is
actually lime green and
[Music]
pink so we're back where we
started okay so this is the Tie that we
skipped
so we're still going to go over to that
second one and come back to this first
one and now when I tie it
down you're not going to be able to tell
where we started where we
stopped okay so now the third zip tie
what we're going to do is pull this out
a little trim it
off okay take this piece pull it around
the back
and then zip tie down so this just keeps
it nice and neat in the
back and then I'll trim off the
excess so most of the time when you do
the poof with a 10 in mesh you often
have to put a third row on
it but with the 21 inch mesh you really
don't have to do that because it's a lot
thicker
and so you don't really have
to add any other layers to it right so
you don't have to add that third
layer just the two layers works great so
I just kind of make
sure everything is flocked out but you
can see it really does a great job of
covering so look at that you see how
well that covers you can't see the frame
if you do see the frame it just means
you need to spread
your poop out a little
bit okay and it's already nice and full
and we haven't done anything to the
wreath so this is a oldie but
goody is one of my favorite methods okay
so now we are ready to decorate this
this is the sign I want to put in
here you see it has the green and the
pink it has a little bit of black in it
these are the
ribbons okay so we have the pink the
black and the
green just like in the
sign I'm going to use all
three so I'm going to layer the three
together and I'm going to cut them at 12
in okay so we'll start off with 10 for
the
[Music]
bottom all right so this is 10
here all
right okay and I do want to dovetail
them
so I just fold them in half cut towards
the wired
Edge
okay okay so we're going to take our
three ribbons
together we're going to fold them in
half Pinch at the bottom and just kind
of pleat them together so just gather
together and then just kind of get a
little bit of a curve under it just run
your fingers under it
then I'm just going to go right to the
frame I'm going to tie it and I'm going
to take my ties and I'm going to kind of
twist them in on
themselves like
that okay and
then I will spread
out my
ribbons so we'll have three
ribbons so pretty these colors are so
pretty there we
go so that little bit of curve helps go
around the
mesh so that's why I like to do
that I'm going to do this all the way
around the
bottom okay so again tuck my tie
in spread my ribbons
out right so that way we can see all
three
right so I'm just going to keep going
around the bottom doing the same
[Music]
thing okay I've gotten all the way
around look how cute those ribbons are
all right
now I am not going to put a bunch of
tails on the top because if I did that
it's either going to cover the sign or
it's just not going to really look right
so what I want to do is put my sign on
one side and a bow on the other side now
I might put a couple of tails in like
one above and below the sign
but
for under the
bow and around under the sign I'm not so
I will cut
off the ties right around or underneath
the sign I should
say
okay
there okay and then I'm going to take my
side
line and get it ready so I want to put a
hole in the
bottom okay and a hole on the
top then I want to take some 26 gauge
wire about 20 in one for the bottom one
for the
top okay
so what I'll do is I'll put my sign on
we'll make our bow put our bow on and
then we'll see if we need any more Tails
so this way you're not wasting ribbon
that you're not going to be able to
see so you don't always have to put
tails in every single
tie all right so we want to put it right
here so get our weaving
needle just our plastic
needle thread it through
there okay just like we're going to sew
something and then go down right through
the
mesh see and then you can see where it
comes out
then
I'll pull it pretty tight and wrap it
around the
bar okay just like
this then when I feel like it's tight
enough I'll trim it off and just tuck it
under all right now let's do the other
side side so see you wouldn't have been
able to see anything under here so
there's no sense
in putting something
there okay so then we'll put our mesh
down through or put our tie down through
here right through the
mesh okay pull it pretty snug
okay trim it
off all right there we go so it's on
here
nice
okay it's just kind of floating on there
it's not going to move but it's not
squashing anything so that's really what
you want okay
now let's make a
bow and I'm going to put that on this
side and then we'll see if we need any
more Tails okay so I want to start with
this one on the
bottom super pretty with the little
polka dots all right let's
do about a 12 in tail okay so I am going
to put it down sideways in my bow maker
and twist
it right then we're going to
go out to the 6 in
so you can put your finger there if
that's easier and then twist in the
center you're only twisting it one time
to get this side upside
down so wrong side
up okay so we just keep doing
that all right we're going to do three
like
this okay so three at 6
in this is just going to be a 321 bow
which just means
three Loops two Loops one
Loop
okay all right so on this last
one I'm just going to pull it out and
trim it
off okay so now we'll go on to the next
ribbon so next I want to put this one in
okay so I'll do the same thing dovetail
it this time I can use the tail to
measure okay so we want two at 6 in so I
can either use the bow maker or The Loop
below it to
measure oh this is so
pretty I love these colors together
there we go
okay all right and then we're going to
do our Swiss dot last I love these
larger polka dots with the tiny Swiss
dots it's just so pretty okay so we're
going to do one loop at 6 in with this
all
right there we
go right now we're going to grab a zip
tie we're just going to go under one
side pull it up get it started so I just
like to get the bow started and then
just pull it out with a zip tie so you
can see the channel That the bow maker
made made so you want to hold one side
slide that zip tie around then you can
just make sure it's staying in that
channel cuz that is what's going to make
sure that your ribbons are all going to
stay the length we wanted then I'll grab
a pipe cleaner and I'm going to put that
under the back before I completely
tighten the zip
tie and then I'm just going to make one
more check I just want to make sure
that everything is in place that
everything looks good yes and then I can
tighten it
completely all
right I'll use that and the pipe
cleaners to hold it while I kind of
spread out the
ribbons I like to spread them out
first that way I can kind of get things
where I want them to be and then I can
fluff them in their
place
okay this just makes it a little bit
easier okay now to fluff it I just go
back and forth just kind of loosening it
from the
center getting it nice and
fluffy here we go you want to do one
side and then the
other just so you don't get get
lost is when you're new at doing this
it's really easy to get
lost so with this many Loops it's not
that bad but if you have more than this
then it's easy to get
lost so the more Loops you have the
easier it is to get lost where you're
going
okay there we
go don't don't be afraid to pull on them
oh isn't that pretty okay so we're going
to trim off the excess zip
tie okay and we want to go right next to
the side so I'll go like right
here okay and I'm just tying it right
around the
frame then I'll just twist it a little
bit tuck it in
okay all right now I'll kind of pull my
Tails
out kind of refluff everything make sure
it's still in
place everything is where I want
it there we go just like that okay so
then I will run my hands
under the 2 and 1/2 in ribbon and I'm
going to curl up the one and a half so I
just like to use my thumbs but you could
use anything you could
use a glue stick so you could take a
glue stick and just kind of
loosely twist it around pull it out then
Loosely pull it out I like to use my
thumbs you can use a a dowel anything
that you have on hand okay there we
go there isn't that pretty okay so all
we
need as far as Tails go is one here one
here so we need
four looks like we need four of our
Tails so we'll make four
more put those
in okay now we're just going to fold
them in half Gather in the
middle get a little
curl okay all right we're going to put
one under the
sign okay twist that
down okay so I'm just going to spread
them
out okay
spread them like this here we
go there we
go all right we've got one right next to
it
there we
go spread these
out if you hear that that's my dog
snoring in the background
okay she has a little spot she sits on
behind
me okay
okay all right so then we'll
do one
here all
right there we go
okay and the last one right
here oh these colors are so pretty
all
righty okay there we
go look how pretty that
is okay now I grabbed a few little pink
flowers with some little green it also
has a little bit of yellow like in the
side and so I'll kind of push the
greenery up like this
and trim them off I think this is just
going to add a little bit
extra all
right so what I'm going to do is make a
tiny little hook in it like that and
then I can put
that in my glue and I can put it right
in where those ties are and just kind of
clamp it
down we can get a little bit
have some flowers in there all right so
hook dip it in glue and right in that
tie so it kind of acts like a
little place to put it in we definitely
want to put some on the bottom okay so
exact same thing on the bottom so you
can see when I kind of tucked them down
it almost makes like a little circle and
then you just kind of
plop your florals in there it just makes
it super
easy and that is what it's going to glue
to is that
tie
okay and after a minute I'll just kind
of go and squish that tie a little bit
just to make sure it's going to hold
it
okay I give it a minute so I don't burn
myself
and I'll adjust any ribbons as I'm going
cuz they will get kind of messed up as
you're going
around you don't need a lot just like an
inch or
so you can hear her snoring in the
back well I don't know if you can but I
can she's so cute okay
there we
go here
okay so I'll go back just kind of pinch
those for a
minute there we
go
okay in
there okay let's put
one up on the top
here so this was just a little wild
flower
bush just super
cute
okay we
go right and then one right under here
and then that'll be it oh this is going
to be so
cute
okay there we go okay
so
pinch
pinch kind of go around real quick and
kind of pinch some of
them just make sure they're
holding okay should be good all right
let's take a look at
it oh my my gosh how pretty is
that oh that is so
pretty that is really
pretty I love this see there's our bow
there's our sign look at all the little
florals so it's not a lot it's just a
little to kind of accent and just kind
of bring it together I actually even
have one
left awesome well I hope you enjoyed
this I love
this so make sure to let me know what
you think and like And subscribe and hit
the Bell icon to know when I'll be going
live or when I'm uploading new content
thank y' all so much for watching and
I'll see you soon bye y'all
[Music]