How to Build A Longbow

LEARN ARCHERY
7 followers
6 Video Views·Jun 9, 2025
My name is Benjamin Stevens and I've been building and hunting with bows like this one
since I was 10 years old.
In this video, I want to walk you through every step in the process so that you can
build one too.
The first thing I want to talk about is wood selection.
Here's a list of different woods that I've used for building bows.
There are more than are on this list that will work great, but these are just the ones
that I have experience with and would recommend to you.
When a bow is being drawn back, it's under two different forces.
The back of the bow, the side that faces away from the archer, is being stretched.
It's under tension.
And the belly that faces the archer is under compression.
Some woods are way better at one than the other, and depending on the strengths of the
wood, we have to alter our design slightly.
When it comes to actually building the bow, the gold standard, in my opinion, is hickory.
It's by far the most forgiving wood to work with, and it also holds world records in flight
archery, making it one of the highest performing woods.
It does have two downsides, however, which is that it's very rot prone.
So if you don't treat the tree really fast and get it out of the moisture and take the
bark off right away, you can actually have the wood ruined by spalting and rot from something
as simple as leaving the bark on too long during the drying process.
Its other biggest con is that it absorbs moisture out of the air.
So if you're hunting in a very humid environment, the bow will actually be very sluggish and
shoot a lot slower than if you were to shoot it in a nice cool and dry environment like
wintertime in Alaska.
My second favorite bow wood might surprise you, and that's birch.
I think this is a super underrated wood for making bows.
It's very tension strong, just like hickory, even easier to work with.
And because it's so tension strong, you can get away with really tight recurves or even
really aggressive designs that you wouldn't want to do with other woods.
One thing that I will note is that it's also very rot prone, just like hickory, so it's
a better cold weather and dry weather wood for hunting.
And it also really likes a heat treat, so you'll notice that this belly of my bow is
turned golden brown with fire hardening, which I'll show you much later in this video.
I'm going to lump a bunch of woods together right here.
This one happens to be ash, but all of these woods I find to be pretty similar.
They're tension strong, very dense white woods, but you can make great bows out of these,
and if they grow on your property, then any of these would be a great choice.
Osage orange is a very popular bow making wood.
In my opinion, it's a little bit overrated.
It makes a good bow.
It's very rot resistant, but there's a lot of extra work that's necessary when you're
making an osage bow, like chasing a growth ring and removing all of the sapwood.
And I don't see any performance benefits out of my osage bows.
They don't outperform any whitewood bow, like my hickories or even birches.
Personally, I would rather just work with one of these other more common woods.
There are few conifers or evergreen trees that make good bows.
Two of my favorites are yew, pacific yew is the only one I have experience with, and eastern
red cedar or juniper.
This happens to be a juniper tree.
This is one of the prettiest bows I've ever made, and also for its draw weight, the fastest
bow I've ever made.
One of the cool things about these conifer trees is that they have two tones of wood
and you can use both in the bow.
The white sapwood or cream colored sapwood is tension strong, and the purpley red heartwood
is compression strong.
So you can get a nice two tone bow.
They look awesome.
They hold moisture so well that makes them really rot resistant and you can use them
in high humidity environments.
However, if you shoot them below freezing, they're prone to explosions.
The moisture inside the limb is trapped and if it freezes and then you draw the bow back,
I've had several friends report that they've had bows explode on them in below freezing
conditions from yew, particularly.
Another very underrated wood is black walnut.
I don't see a lot of people using this wood, but I think it's a great wood to make a bow
out of.
It's another two tone wood.
You can get some of that really rich heartwood in your bow.
The sapwood is very tension strong and in my experience very similar to birch.
Rot resistance is also a problem with this wood, but if you treat it well, it makes a
great hunting bow and a very pretty one too.
If you plan on hunting in a high humidity environment or you want a tree that you can
find almost anywhere in the northern hemisphere, oak is a great choice.
Every species of oak will make a great bow.
This happens to be red oak, which is not quite as durable as white oak, but still makes a
great bow and is very common.
White oak, which is named after the color of the bark, not the actual wood, is probably
my favorite and the grain is so tight and so water resistant that it makes great barrels
for wine.
If you're looking for the best all around wood, white oak is probably my top choice.
Those are just a few of my favorite woods, but there are so many more.
But just to conserve time, we're going to cut it here and know that any wood on this
list will work for the design that I'm going to teach you.
Now we are going to go out in the woods and actually select a tree to make a bow out of.
There's a free app called Picture This that I use sometimes, especially in the winter
time when it's hard to identify trees.
It's just a free app that's available in the app store on your phone.
You take a picture of the tree and it'll tell you what species it is.
Works pretty good.
It's not perfect.
But mostly what I'm looking for is a nice straight trunk with not very many branches
or knots.
Be prepared to look at hundreds or even thousands of trees before you actually cut one down
to make a bow.
The more picky you are with your tree selection, the easier the rest of the process will be.
Well, we might have just found the best tree that has ever been a tree before.
Look at this thing.
Not a single branch for the bottom, I don't know, 15, 20 feet.
Totally smooth.
The only thing is that down here, it does a little wave.
But I think if we took like from here to there, that's at least 12 feet of tree, which would
be two bows in length, and it's a big enough tree that you'll probably get four quarters
out of it.
So eight bows right there and one tree, I think that's the one we need to cut down.
This is not a tree felling course, so I won't go into chainsaw work.
On smaller trees, I like to use a handsaw.
But I dropped the tree, cut it into six foot sections, 72 inches long, and then carried
it back to the truck.
Hardwoods are super heavy, so make sure you don't park too far away from where you cut
the tree down.
I just want to mention here that you can totally use a small diameter tree, especially if it's
one of the tension strong woods, like birch, maple, hickory, and all of those just regular
whitewood trees.
Something about this big in diameter is totally fine.
And you can skip this whole splitting section, but I'm still going to show you how I deal
with big trees, because for the most part, I'm using big trees so that I can get many
bows out of one tree.
This log is about eight inches in diameter, so I think I'm going to be able to get at
least four bow staves out of this log.
I need to split it, and then split each half again to make quarters of the log.
Uh oh, we've got a small problem.
It didn't follow my split.
I'm just going to finish it out the best I can.
So what happened here is the split that it chose went off to one side.
I don't think that's indicative of the grain pattern at all.
It's not twisting or anything.
It just sheared off towards the edge of the log.
But the grain is fairly straight.
You can see the heartwood is a little bit wavy.
What I'm actually going to do now is I'm going to put this up on blocks and use my chainsaw
to cut staves out of this log.
And we're just going to have to manually choose with a saw what our staves are going to look
like as opposed to splitting it.
When I'm cutting logs lengthwise to make boards or bow staves, I like to use a longer barred
chainsaw.
The reason I like a long bar is because it's a long straight edge.
I make sure that my cut is vertical, stacked up on pieces of firewood so I don't hit the
dirt underneath the log.
And I swing my chainsaw vertically as I walk up and down the log.
I'm only using the three teeth on the end of the bar to cut at a time.
And I find that that keeps my chains sharper for longer and actually cuts more efficiently
than laying the entire length of the bar down and trying to use more teeth at one time.
So we ended up with four six foot long staves and then that piece that kind of split off
of the back side.
I cut into short staves or billets.
There's two of these and they will later be joined together at the handle.
In total we'll be able to make five bows out of this one six foot long log that was eight
inches in diameter.
Now what's left to do is seal the end grain with some sort of waterproof barrier.
My favorite thing to use is Elmer's Classroom Glue.
And then set it somewhere warm and dry to season.
It takes about eight to twelve months for something to go from a green log to a seasoned
stave.
The best way to know if your stave is completely dry is to weigh it and then weigh it again
a week later and if it hasn't lost any weight then it's dry.
This is a different stave than the birch tree that I just cut down and it's been seasoning
for about five months.
I want to build a bow out of it soon so I'm going to try and make it dry as quickly as
possible which means I'm going to remove the bark so that more moisture can come out from
the back of the bow as well.
Bark has two layers.
There's the textured outer bark and then there's the under bark also known as cambium and I'm
going to show you the difference.
I'm going to remove the outer bark but leave the cambium on.
Then you see that color change?
So this is the outer bark and that's the cambium.
It's usually a light brown color.
Some woods it's actually pretty close to the wood color so you have to be careful but the
reason that I'm leaving that on is because we need to be incredibly careful not to damage
the outer growth ring of this tree because we're going to be putting a ton of pressure
on that when we bend this bow.
So if I just get it down to the cambium that will allow more moisture to come through but
I'm not going to take the time to remove the cambium right now because it's not necessary
and I don't want to damage anything.
Now the bark is removed off this piece and I've got just cambium on the back.
A very simple design that I like when I'm making my bows is to take my draw length which
is 28 inches times that by two plus the unbending sections of the limb.
So I'm going to cut this in length and then I'll show you what the rest of the design
looks like.
So the next thing I need to do is mark the center line down the length of the bow.
For this I use a chalk line and then I'm going to mark the center 32 inches and then two
inches on either side of that so 30 and 34 that will be my handle section and then two
inches from there so 28 and 36 and that will be where it fades from a thin handle to a
wide limb.
Those are called the fades.
Now I've got a nice flexible ruler and my handle, those four inches in the center of
the bow, I like to have an inch wide.
So mark a half an inch on either side of that line and then connect those lines with my
ruler.
That's just a nice starting point for a good comfortable handle.
At the end of the fades, so two inches on either side of the handle, I marked where
my fades will be.
The limbs are going to be 1.75 inches wide but for now I'm just going to mark two inches
and we can always narrow it later.
So an inch on either side of center and then I'll continue marking every eight inches or
so down the limb all the way to the end.
Then here's where my fades go from the one inch wide handle to the two inch wide limbs.
Now I've got two inch wide limbs all the way to the end of the stave but I need to narrow
them.
So ten inches from the end I'm going to mark and then the tips I'm going to start with
half an inch wide.
So mark a quarter of an inch on either side and then connect those little hash marks with
my lines at ten inches.
Now I can see the bow in the wood which is a pretty cool part of the process.
So I need to remove all of the wood that's outside of these lines making sure that I
stay 90 degrees with the bark side of the bow.
In order to do that I need the bow, I need the stave to be completely stationary.
So I can either hold it by clamping it to a picnic table with spring clamps, I can put
it in a bench vise if I have a nice workbench, or I can use what's called a shave horse.
This shave horse or bow ear sponge, come here buddy, come over here.
This is just a really simple device, it's got a pivoting arm that clamps my wood, it's
got a table and mine is adjustable so it can go up and down to clamp bigger or smaller
pieces of wood and it's built on saw horses.
Mine happens to be collapsible, these arms pivot in so the legs can fold up and I can
hang it on the wall easily.
And then I just put a nice piece of wood on top and a little cushion that I got from
the hardware store.
So I'm just going to push with my foot pedal and clamp my piece of wood and then take my
draw knife and remove the wood that's outside of my pencil lines.
Now notice that this piece is splitting and wanting to dive in to my pencil lines.
To prevent that I'm actually going to need to cut from the other direction.
Sometimes chipping happens like that if you're cutting against the grain.
So if you go from the other side then you can stop it from going too deep and ruining
your piece of wood.
The handle section can be a little bit tricky because it narrows from two ends and you don't
want to accidentally take off too much and go into your limb.
So what I do is I cut from one side being really careful to stop at the middle of the
handle and make a bunch of feathers it looks like.
And then I go from the other side and then take all those feathers off.
And I continue doing that until I make a nice smooth kind of a bowl shaped handle.
Now from the front it looks just like a bow but obviously the limbs are way too thick
to be bending so I need to narrow them.
I'm going to take a pencil and mark about half an inch thick.
This is just to get me close to bending thickness.
It'll end up being about 3 eighths of an inch thick when it actually starts bending.
I could remove all of this wood with the same draw knife that I was using to bring it down
to shape but it would take a long time.
So this is just a time saving trick that I've learned and I'm going to use any kind of hand
I'm going to cut every 6 inches and then I'm going to take a chisel and hammer and knock
out big blocks.
But when I'm cutting I'm being very careful not to go below that half inch line.
The main thing to be careful of when you're using a chisel and hammer is that if the crack
wants to dive down you might have to come through with your hand saw and cut off another
piece.
But if you're careful and only take a little bit off at a time this saves a ton of draw
knifing and is the fastest way to get your bow down to thickness.
Now I'm just going to take my draw knife and clean this up a little bit.
So now we've got it thinned down to about a half an inch.
We've got our front profile pretty mapped out.
I need to do these tapers.
I'm just going to use the same chisel and taper from the thickness of the handle down
to the thinness of the limb.
And then I'm going to take this rasp.
This is just a $20 farrier's rasp which is what they use to shape horse feet and just
really clean this piece of wood up before I actually get this down to bending thickness.
Now I need to get the wood the rest of the way down to that line but I'm actually rasping
at an angle so you can see that my tool marks only go about halfway across the limb.
And then I'll turn the bow around and hit it from this side and then we'll end up with
a ridge in the center which we'll take off later.
It's just a lot easier to remove material off of corners than it is to actually remove
the entire flat top.
And also with this rasp if I went flat I'd be at risk of tear out on the far side.
So we remove down to the line on this side, turn the rasp around, remove down to the line
on this side, and then remove the ridge off of the center.
Now I need to be super precise and get these limbs down to 3 eighths of an inch.
So I've got my tape measure and a pencil and I'm just going to mark 3 eighths of an inch
and I'm going to continue with my rasp bringing it down to this line but now I'm going to
start using the fine side of the rasp because I really don't want to go below that 3 eighths
of an inch line and the closer we get the slower we want to go.
Now this is what's called a bow blank, a bow shaped object that's not quite bending yet.
I've actually got it bending a little bit if I push on the floor.
That's called floor tillering and the only reason I do this is to check to make sure
that the limbs are roughly even.
If I notice that one limb is bending a lot easier than the other then I'll just do a
little bit of work to get them roughly the same.
But the next thing we need to address is limb twist.
Lots of trees have a little bit of twisting in their grain and so when you split your
stave out of the tree you end up with a little bit of propeller twist.
It's really easy to fix with just a little bit of heat.
You can do it with steam or a fire or in this case we're going to use a heat gun.
I'm just going to heat up the limb until it's too hot to comfortably touch for more than
about a second and then I'm going to put weight on the end of a spring clamp and then pull
it just a little bit farther than straight as it cools down it'll settle into that new
position and then it'll take everything off and it should be about straight.
You can do this as many times as you need to just be careful not to get the back of
the bow or the side that faces away from the archer too hot because you don't want that
side brittle.
Just heat the belly.
I intend to give you guys all of the secrets to bow building and I want you to be able
to watch one of my videos and go out into the woods and do it yourself.
If you still want to be walked through the process I do teach workshops.
Right now I have available dates in June in Michigan and then in August here in Alaska.
So if you want to sign up for one of those workshops head to the link down in the description
and I'll see you there.
Now while the bow is cooling down I'm going to make a string.
I've got two nails that are about 100 inches apart.
I'm going to make eight strands of B55 around those nails.
This is B55.
I just get it on Amazon and it's just a type of waxed Dacron string that I use to make
bow strings out of.
Now that I've got two bundles of eight strands of B55 I'm going to match them up 10 inches
from the end.
I'm going to put them together in my fingers like this and I'm taking my right hand.
I'm holding the strings in my left.
I'm taking my right hand and pinching one of the bundles between my pointer finger and
my thumb and I'm rolling it away from my body.
Then when I come back I grab the string between my pointer finger and my middle finger and
pull the bundle back over the top and now I've got the second color on top and just
repeat that process.
And essentially what I'm doing is I'm twisting the fibers one way and then the bundles the
other and it locks them into place.
This is called a Flemish twist.
I'm going to continue that until I have about two inches twisted together.
Now I've got two inches twisted together and some tag ends.
I'm going to put these tag ends back with the other strands of the same color to create
a loop and I'm just going to continue my twist to tie the loop into the main string.
We'll do that for about three inches and then we can trim the tag ends off just like that.
I like to line my bow up with the string and start my Flemish twist again maybe six inches
from the end.
It only really needs to be twisted where the knock points go.
I'm just going to continue this Flemish twist all the way to the end of the string.
For the other side of the string I'm going to tie what's called a bow ears knot which
is just a really easy adjustable knot.
So all I do is I start with a bite and then I do a regular overhand knot.
See that?
And then I'm going to take this tag end and wrap it through the loop three or four times
and then when I put that on the knock of the bow the pressure here is going to keep that
knot from coming untied and then as I progress through the tillering process I'll move this
knot further up the string to make the bow string shorter.
This is called a serving tool and when you buy string serving material off of Amazon
or any bow making website it comes with this tool.
So what I'm going to do is I'm going to set the tag end up the string and I'm just
going to start wrapping and I wrap directly over that tag end.
Now that I'm past the arrow rest I'm just going to create a bunch of slack
and I'm going to pass this through the loop that I create with the slack twisting it
the same way but wrapping back towards the serving.
I'll do this about 10 times.
Now I'm going to put the slack end over here and then as I unwrap these
I'll be wrapping over the tag end here.
Now I can just pull this tight and then trim that and then underneath here is our tag end
so there's a tag end here and a tag end here so that should never come untied.
In order to string this bow I need some simple string grooves so I'm just going to take
the corner of my rasp and file at a 45 degree angle about half an inch from the end.
These will be replaced later so they don't need to look perfect they just
need to be deep enough to hold a string.
Now remember that in the beginning when we were making this bow we took the bark off
but we left the cambium on. Cambium is not nearly as stretchy as wood so we're going
to have to thin it down. Sometimes I leave a little bit on as kind of a camouflage pattern
because it's it contrasts with the wood a little bit but it's important to get it
thin enough that it doesn't crack as you stretch. I don't think it causes any functional problems
to leave it on there but it's really scary when you draw your bow back for the first
time and you hear cracking and popping but typically when you hear that sound it's not
the wood cracking and popping it's just the cambium on top. I've done it a bunch of times
and it's always terrifying. There's little bumps and grooves in the wood and so sometimes
I have to use a card scraper with little round edges on it to get the cambium out of these
little grooves. You can also use sandpaper because the cambium is softer than the wood
so it'll sand off pretty easy. Now this bow is ready to start bending so what I've got behind
me is a tillering jig or a tillering tree. It's just a leather wrap so there's two nails here
and then I cut slits on both ends of the leather and I'm going to place the handle in there
and it's strapped to my railing. You could strap it to a tree or you could actually build this
whole thing on a wall which is something that I do sometimes. Now I've got nails starting at 10
inches and then every two inches down all the way to 28 which is my draw length I've got
these nails so that I can pull the string and latch on those nails. That works pretty good but
if you've got a little bit of extra time and tools laying around, if I put a pulley at the
bottom of the tree and then hook that to my string I can actually stand back and pull with a rope and
watch it bending actively as opposed to just bending it on the nail and standing back. That's
also advantageous because I can put a little luggage scale on the rope so I can see how many
pounds I'm pulling with and also watch it bend at the same time. So it's just a piece of leather
holding my handle and then you can see these nails but what I like better
is to clip a rope there and then have a pulley at the bottom so that I can pull on this rope
and bend my bow just like that. For this bow I'm going to go all the way down to 28 inches which
is my personal draw length and since I want this to be a hunting bow I'm going to shoot for about
50 to 55 pounds. The advantage of using this luggage scale is that I can pull with exactly
55 pounds and see how far it's bending. It's important not to bend the bow with more weight
than your finished draw weight because you're just introducing more stress into the wood than is
necessary and you'll end up with string follow which is where the bow stays a little bit bent
even when the string is off of the bow. So I'm going to stand back and I'm going to pull on this
55 pounds of force and look to see where it's bending. Any spots that are stiff I'll scribble
on with my pencil and then I'll take wood off from the stiff spots until they're bending as
smoothly as the spots that are already bending. My primary tool for removing wood at this stage
is a card scraper. I just push with the edge and it creates nice little ribbons.
If I'm being really aggressive sometimes I use the back of my draw knife, a nice flat blade,
and I do the same thing. The advantage to this is if you're really hogging off a lot of material
it doesn't get hot. When you use a card scraper you're creating so much friction. It's such a
thin piece of metal that you can actually burn yourself if you're not careful. I'm going to keep
doing this checking, removing, checking, removing until I've got this bow bending until it looks
about like a strung bow and then I'm actually going to shorten this string so that it's two
inches shorter than the bow length itself and string it up and continue that process until I
get it back to my draw length. This is the longest part of bow making and this is also the most
important part to get right. If your bow is going to break it's probably going to break during this
part of the process and it's either going to be because you didn't take enough time looking at
the wood and really assessing what's going on or you removed wood from one spot too quickly
or if you didn't take care of your wood in the beginning and there's some sort of spalting or
rot on the back of this bow that can be a common failure point as well. So if you do break a bow
make sure you look it over and really try and figure out what happened. Was it a hinge that
you made by removing too much material at one time? Was it that there was some sort of spalting
or soft spot on the back of the bow? Was there beetle damage on the back of the bow? There's
always a reason. Bows don't just break just because so it's important that we learn from
each time that a bow breaks so that it doesn't happen to us again in the same way. Right now
this bow is drawing about 65 pounds at 28 inches which is a little bit higher than I wanted but
when I shape the handle I'm actually going to make a deeper thumb groove so 28 inches is actually
going to be about three quarters of an inch less so that will reduce the draw weight a little bit.
As I shoot it in it will develop a small amount of string follow which is normal
and that will reduce draw weight a little bit. I'm going to add tip overlays with antler pieces
that's going to actually increase the draw weight because then we're pushing the string further
forward. So there's a lot of things that are going to change the draw weight slightly so I would
rather finish the bow and then see how I like to shoot it and adjust the draw weight later
then drop it all the way down to my target range now but what's most important is that it's bending
very smoothly. But now this is a bow I can shoot it I could take it hunting and it would be
completely functional and everything from this point forward is considered finish work. Things
that make the bow prettier or more comfortable in your hand but don't necessarily increase the
performance of the bow itself. But before I leave the tillering tree I just want to tell you a couple
things. If you accidentally miss your draw weight and end up too low of a draw weight there are
three things that you can do. You can heat treat the belly by getting it really hot just like we
did during the twisting portion. You can add back set or recurve to it by clamping it to some sort
of form and then as you heat it it'll take back set and you can also shorten the bow by about an
inch from either end. Shortening the bow will increase your draw weight but it doesn't necessarily
increase performance that much because as you near 90 degrees with the angle between your string
and your limbs you lose a lot of performance with your bow. So that's why I like to keep them pretty
long 66 inches. So the next thing we're going to do is we're going to shape this handle and add antler
pieces to the tips. When I'm shaping the handles my primary tool is a half round rasp. There's two
different types of handles on traditional bows. There's the more modern pistol grip which has a
deep thumb groove and an arrow rest and those things help you hold the bow more consistently
and generally make you a little bit more consistent and more accurate. And there's the very
traditional just smooth straight handles with no arrow rest. As far as I know there are no ancient
cultures that used arrow rests. An arrow rest is a 20th century invention that came out around the
same time as they made compound bows. It's more comfortable for the archer because then you don't
have the fletchings sliding across your knuckle and it's more consistent because your hand can
move but an arrow rest cannot. For this bow I'm going to shape a pistol grip handle and I'm also
going to put an antler arrow rest. If you decide to go with a less traditional pistol grip handle
I do have a couple tips to make your bow a little bit more accurate. I dish out where the arrow pass
is going to be and then I put a antler tip above my knuckle and the reason that I like to use
antlers instead of a flat shelf is because they're round. So if you think about a round cylinder
and a round cylinder sliding past each other perpendicularly they're only touching at a very
small point. So even if you do make an arrow rest you should probably round it over too instead of
making a flat arrow rest. I found that the thumb groove being deeper is more important than the
pointer finger being deeper which is kind of a little bit counterintuitive but if your thumb
points straight at your target you have an easier time not torquing the bow side to side when you're
than if your pointer finger was to go deeper and kind of wrap this way. And then I'm going to sand
this all the way from 80 grit to 400 grit and make it as smooth as possible. The reason I add antlers
is twofold. I like how it looks and it also protects the ends of the limbs from the string
so you can use a more abrasive and lower stretch bowstring material.
When I'm shaping my tip overlays I usually do a deep groove in the back with a chainsaw file
and then I angle 45 degrees towards the string because when the bow is strung it doesn't
actually sit flat it sits like this. But it's also important to take a flat file
and narrow this section because as you draw the bow back it's going to rotate up so there needs
to be nothing for the string to hang up on right there. For the arrow rest I'm just going to drill
a hole and then pound a little antler tine in there. This happens to be a caribou antler tine
but any deer species will work. I just think that this is a really nice low friction arrow rest that
protects my knuckle from the fletchings. Now we have a question of brace height which is how far
should the string be away from the riser. You can shorten the string either by twisting it
counterclockwise or by shortening this knot. I prefer to adjust the string by shortening the
because it's more permanent. If you do the twisting method and then you take the string off
it'll untwist. So I want my brace height to be so that my fletchings don't touch the arrow rest
and I don't want to go any higher than that because then we start to lose performance out
of the bow. So I'm just going to unstring it and then adjust this knot and a little bit of
adjustment goes a long way. Let's see how that is. There. Let's shoot this thing. Nice.
That thing shoots great. I think 60 pounds right around 55-60 pounds is perfect hunting weight. I
would not hesitate at all to go moose hunting with this bow and I've got pass-throughs on
whitetail with 40 but just having that little extra oomph if you hit a rib or something is
really nice. Now let's stain it. This is vinegar with a ball of steel wool on the inside of it
and it's been sitting on a shelf for a long time so the steel wool is kind of
dissolving in there and this creates a chemical reaction with the tannins in the wood
and oxidizes it but it usually makes the wood a lot darker and it's better than staining the
wood because it goes deeper and it's a more permanent stain. I love how it really makes
the growth rings pop in a way that you couldn't really see those before I did the ebonizing
treatment and the cambium that we left on as a camo pattern turns almost purple which I just
think looks crazy cool. I'm going to give this a couple hours to continue reacting and then I'm
going to put a coating on the back of the bow. So there's two types of protective coatings that you
can put on your bow. You can either do an oil treatment which repels water or you can do a
clear coat which creates a water barrier and locks it out. The biggest enemy to your bow is moisture.
The reason that I prefer oil is because it allows the wood to breathe. Every time you take it into a
new environment or a new temperature the wood's going to expand and contract and then also as
you're drawing the bow back there's a lot of movement especially on the back of the bow and
so if you did a clear coat and you didn't use something that's able to really flex and move
it'll crack over time and also the clear coats can yellow over time too. Spar urethane is the
best that I found but I still think oil is better. The only downside to doing an oil finish
is that it has to be reapplied. I would say if you're hunting hard especially in the rain
I would reapply every year at the beginning of hunting season. So here's the finished product.
If you guys have any questions drop them down in the comments below. If you want to see more
complex builds or learn how to make recurves or what it's like working with different types of
materials check out my other videos and if you still want to be walked through the process in
person I have class dates available that you can check out on my website stevenswild.com
link in the description and I'll also be selling this bow as well as
several others. Thanks for watching I'll see you guys in the next video.
