Art Restoration of an Old & Stained Etching

Legacy Conservatory
14 followers
24 Video Views·Apr 19, 2025
Coming up is the restoration of a ripped and stained etching. Lets dive into the delicate, intricate process of fine art etching restoration on a print that has been ripped, damaged, stained and discolored over time.
Today, our conservator breathes new life into what was once a true masterpiece.
Damaged from poor storage and salvaged from the trash, it is only right to restore this
captivating piece of art. The extent of damage demands a thorough treatment.
Unwind as we bring you along this delicate restoration.
This etching, created from the detailed craft of a printer, is no ordinary piece.
Created nearly 150 years ago on India paper, its delicate nature poses a challenge for
restoration. India paper is a thin material made from bleached hemp and rag fibers.
Despite our conservator's reservations about washing this print, the level of damage requires
a thorough and comprehensive treatment. After an inspection, it would seem that this etching
has multiple layers. You can see how they are splitting and lifting away at the corners.
Years of exposure to moisture have left their mark. Notice the dark brown tide line as well
as the debris along the edges. A closer look reveals a blind stamp and a bird.
This is known as the printer's mark. The stamp reads, Artist London Proof,
while the print is credited to B. Brooks and Sons, published on March 1st, 1887. Understanding every
detail is paramount for a conservator, especially when treating such delicate prints. Without an
examination of its creation, how else would you know the appropriate method? The restoration begins
with a gentle surface cleaning using a brush, smoke sponge, and a razor. The paper's softness
demands careful attention to avoid disturbing its delicate fibers.
Dirt, some ingrained and stuck between layers, is cautiously removed.
Scotch tape and masking tapes are delicately removed using a warm air blower, softening the
adhesive. A crepe square gently lifts the sticky residue, preparing the print for its warm water
bath. The print is immersed in a bath of warm tap water, and as the layers float apart naturally,
the water turns brown. The rear support layer is gently removed underwater using a spatula,
ensuring the primary and secondary support layers remain undamaged. The water, now dirty,
is changed and the etching is left to soak for an hour. A solution is added to raise the pH,
benefiting the paper and aiding in the removal of discoloration. In order to lift the etching
out of the bath without causing trauma, a polyester fabric known as bondina is used.
After a night of drying, a mild bleaching agent addresses foxing stains caused by mold,
followed by thorough rinsing in four 30-minute tap water baths. After an initial press,
tears are delicately repaired with a very light Japanese tissue
and wheat starch paste, holding the fragile print together for the next phase.
Our conservator places the etching in a humidity chamber, where the print relaxes, preparing for
the lining process. A humidity chamber is created using a damp towel and a layer of Gore-Tex.
The humidity reaches 95%, enough to relax the paper without making it wet.
Maintaining the character of work is important, though so is the choice in materials.
Because of this, the conservator made the decision not to reuse the old backing and instead opt for
a new lining. Made of Japanese tissue and wheat starch paste, which is a cellulose-based adhesive
used often for paper repair. Made from pure wheat starch and cooked with water, this is a 10%
solution. Additional water is added to create the smoothest of pastes. The thorough preparation of
the paste, sieving and application ensures a smooth adhesive. While still damp,
the print is adhered to its new lining and taped to a board.
As it dries, the lining shrinks, flattening the paper.
So
Removing swollen fibers is the last port of call. A mix of 50% alcohol and 50% water is used to
missing areas with cellulose fibers and adhesive, matched to the color and weight of the original
paper, becomes an art in itself. Some marks, ingrained and irremovable, stand as a testament
to the piece's journey. Conservation treatments, though unable to make the artwork new, aim to
respect for its history, the etching stands restored. Trimmed and ready for mounting and
framing, it emerges as a testament to the delicate relationship between time, art, and the skilled
hands of a conservator. When you see what we started with, to now, its revival is evident.
restored. This process was complex and meticulous. We exported the file in the highest quality
and used a high quality printing service for the artwork. Here's the print compared to the original.
You can purchase this print and the original restored print on our website. The link is in
the description. Buying this still life art will give you a beautiful piece to hang at home and
support the channel. Let's look at the transformation from the original to the restored to the print.
Amazing! This restoration is now complete.
