Amazing Restoration Of A Painted Antique Eastlake Dresser

Antique Art Deco
12 followers
15 Video Views·Jun 8, 2026
I found this painted antique Eastlake dresser for just $20 and knew it deserved a full restoration. It was covered in layers of old paint and strange primer. Watch as I strip away the paint and tackle the repairs.
AI Generated·May contain errors
Video Summary
AI GeneratedThe video documents the restoration of an 1889 Eastlake-style dresser and mirror purchased for $20. The creator navigates challenges including thick layers of paint and a mysterious purple chemical reaction in the wood, eventually restoring the piece using chemical stripping, oxalic acid, and a walnut stain.
Hey everyone, welcome or welcome back to the channel. In this video, we are working on this
Eastlake dresser with a mirror attached. This piece seemed to be in pretty decent condition.
When I purchased it, I found it for $20 on the Facebook marketplace. However, there are
definitely a few issues and we're going to have to deal with them in this video.
And someone decided to throw a candle on the side here. I don't know why I keep finding
candle splatters, but the nap joinery here on the side is really nice, which was popular in the 1870s
to 1890s. But this piece is covered in paint. It's just slapped all over it and we need to
remove it. So without further ado, let's get this project going.
No way, we have a newspaper. Just half a newspaper. On the inside, I found this
half sheet of a newspaper and I'm not sure how old it is, but we're going to find out.
Luckily, this piece still has the original mirror and it says Munderloh & Co.
Montreal in 1889. So this piece is pretty old. Munderloh & Co. was founded in 1861 by
German immigrant Wilhelm Munderloh. They specialize in importing goods from Germany,
France, and Belgium. While based in Montreal, it's possible some of the
in this piece originated from Europe. That's not from 1800s. Just a nail. Just pull it out.
When swapping the paint, there was no lead detected. But when swapping the wood directly,
there was a weird purple in the wood and that turned purple on the swab, obviously. But
I don't think it was lead. I just think it was something in the wood. You'll see what I mean.
I started with a smaller area to test to see if the paint stripper would work.
It seemed to take the blue layer off pretty quick. But there's this weird primer underneath
and I've dealt with this stuff before and it is tough. But it just usually takes a couple
coats of stripper. Let's see. After stripping the top, you can see there's a ton of this
red purple stuff coming out. And after some research, I think it is potassium permanganate,
which is a chemical that was used in the past to basically tone wood. Once you applied to the wood,
it would react and turn to a nice brown. I think it's reacting with the paint stripper and turning
a purple red hue again. If you're looking to learn more about furniture refinishing,
make sure to check out my community called the Furniture Squad. It's a community I started so
can share furniture projects. I also have mini courses in bonus content like refinishing these
two nightstands and spraying water-based polyurethane. I have many more mini courses
and bonus content videos coming out in the future. Make sure to get in on the launch
promo price that is still available today. Oh, and one more thing. I'm giving away five
Baco carbide scrapers in December to five lucky members of the Furniture Squad.
If you're not in yet, make sure to join for your chance to win.
It's almost like the liquid stripper is what causes the reaction the most. Just look at the
color here. I've noticed on some pieces of furniture when scraping the sides, it's almost
like glass-like and I think it's because the wood is thinner and it bends and the blade doesn't
scrape it as well. That's my guess. When trying to scrape the panel here, the wood was so thin
that applying pressure would actually bend the wood and then the blade would just dig in really
easy. So instead of scraping here, we're going to have to strip it off.
I just set up this garbage bag on the inside. So any stripper that falls will just slide down
and off or just get caught so it doesn't make a mess inside the piece.
Here's an idea of how much sanding I did to try to remove the red-purple colors.
After trying to sand away this purple look, it didn't really work. So I think I'm going to have
to try some other methods. So from my understanding, this is potassium permanganate. I think
that's how you pronounce it, which is a chemical. They used it in the past to basically stain the
wood. Once you put it on the wood, it would usually react with the tannins and it would
actually create like an antique brown color, I believe. I don't know if stripping this or
whatever is making it come out purple again, but I'm going to try to remove it with oxalic acid
and see if that does anything. So let's test it out. The reason I'm trying oxalic acid is because
I watched some chemistry videos and oxalic acid mixed with potassium permanganate has a reaction
where the purple color basically turns to a colorless solution. So let's see if it does
anything on the wood. Here's how the top is looking after two applications of oxalic acid.
I've been mixing the oxalic acid with just cold water because I don't have hot
running water in the garage. But today we're going to try, and no, this isn't the classic
Canada Tim's coffee. This is just some hot water from Tim's. I went to Tim's just to get hot water
because I have no running water. So let's put this classic cup to work. It's actually dissolving
in the hot water. In the cold water it wasn't dissolving very well. So I think this will be a
stronger application of oxalic acid. Will it work? Who knows. So the oxalic acid doesn't seem to have
helped the top a lot. The side pieces of the mirror here seem to be a lot lighter. So who knows if this
is potassium permanganate or some sort of dye. Let me know what you think it is. Here I'm adding a
bit of sandpaper grit to the glue just so it has a bit of extra grip so it doesn't slide off when I
tighten the clamp. I find after the oxalic acid that sanding did help remove the color better.
It didn't completely remove it but I removed it as best as possible.
I know the other hardware wasn't going to work so I found this dresser on the Facebook marketplace
as well and it had this beautiful original Eastlake style hardware and I think it is going
to look perfect on our piece. But if you want to see me restore that piece of furniture let me know
in the comments and I'll make a video on that one as well. Since the top was still pretty bad I did
80 again and then 150 grit and then 220 grit and the full piece I did 220 before staining.
But it's finally that time to start staining. The first thing I do is use a tack cloth to
make sure I clean up all the dust and I'm using antique walnut but in general finishes.
So let's apply this and hopefully we can cover up the remainder of
that red purplish color that was left behind.
I'm using spray lacquer to finish this piece. First I take a tack cloth and just make sure
there's no dust on the surface and I spray as much as I can by the door with the fan going
because this stuff is pretty stinky. For the pieces that are laying flat down like this
I go over it twice with the lacquer. This gives it a nice thick coat and make sure I get all of it
and I did four of those coats on the flat pieces and for the side where you can drip more I didn't
spray as much and I did six coats on those. I then applied Howard's feed and wax to the drawers
and finally after a couple weeks we finished this piece but let's take a look at what it
looked like before one more time just to get an understanding of where we came from.
And finally here's what this 1889 dresser looks like after. Here's the damaged area
that we filled in with that piece of wood. I find it just blended in so nicely. Anyway I hope you
guys enjoyed this video. It's one of my favorite ones so far because it's my oldest one yet.
Working on something from the 1800s is pretty crazy to think of so I really hope you guys
enjoyed the process and let me know what you think in the comments below and if you
enjoy the videos make sure to subscribe. See you in the next one!
