Thank you to everyone who has been supporting our channel! If you use the link below before you purchase anything on Amazon, we get a royalty for sending you there, thank you!
Our store is located at 139 Caldwell St., Rock Hill, SC 29730.
ladies and gentlemen this is Joe's
Classic Video Games back with another
cool pinball repair video for you today
we have been working on this Got the
Jack in the Box pinball machine really
cool game uh it's got all kinds of
problems so in the previous video we
kind of looked it over and we worked on
the mech board down in the bottom really
didn't get uh much work out of the thing
um it's got an issue where it doesn't
score about half of the stuff we've got
some lights that don't work in the back
box um and so today we're going to work
on the player unit so let me show you
what it's doing and then we'll see if
the just fixing the working on the
player unit fixes these issues so let's
see if I can get a credit on
it
h I cannot all right we'll have to cheat
so see the zero so it won't credit
up so let's try just uh Whoa let's try
just giving it some credits
so we just cheated let's see if it wants
to start now now it says it has
three huh well I guess that's one of the
first things we need to work
on we were playing it in the previous
video
basically whenever the thing
starts there's a switch that runs
through this switch so if this switch
opens it will not
start so maybe we've got a bad
connection here we haven't messed with
any of this
yet we got to get the start so you can
see what it's not
doing nothing all right well let's get
down in the bottom of it and maybe we've
got a problem with that score uh unit
that we the score motor that we worked
on last time so we talked about on the
previous video how this
brake was broke and we replaced it but
we didn't know for sure that it was the
correct part we thought it was but they
make different lengths and the end is
different um so this is the home
position of the score motor and it kind
of looks like it's not at the home
position i don't know it's not in the
um it's kind of up on the uh the
the cam so why is it not running let's
see if we can give it a little
help
huh so you saw that so now the
little actuator is down in the hole but
it since it was up on the edge it should
have made itself run around back to the
home position
so uh what that probably means is that
we don't have that switch as clean as it
should be so as soon as this runs up off
of this out of this
hole not this one but the one under it
it should take off on its own see it
moving right so it was sitting like that
but wasn't running so that switch isn't
uh as clean as it should be so let me
address that a little bit and then uh
that should now that we're back at the
home position we should be able to start
so it was slightly out of the home
position that switch being closed should
have made it run back to the home
position like it's doing when I mess
with it a little bit um that break helps
it stop right at the home
position right
but if it's not at home the problem you
have is you've got another switch open
or whatever so basically they've got the
thing set up so that whenever it's not
in a resting state at its home position
you can't start a game because it's not
in a its known position that it needs to
start in right so some switch is open
since it's not at home uh that is the
reason that it wouldn't start but now
that we're back at home um it should
start just fine okay so I cleaned the
switch and then I turned that just kind
of similar to how it was cuz I've got
the power off kind of similar to how it
was and let's see if when I turn it on
if it moves at all or if it's going to
be happy there or
what okay so we're exactly how we were
so that's actually good we'll see if it
now it won't start then we'll know that
it's if it stops at the wrong spot it'll
do this it starts this time okay we'll
keep our eye on that
ultra long reset sequence it's probably
too long um okay so let me show you what
it's not doing we got flipper action
this is a four flipper game but hardly
anything
scores also the ball will get stuck in
that that left saucer
sometimes sometimes these light up
sometimes they
don't the drops
uh are not really scoring that noise
you're hearing is this the rubber behind
the drop target the drop targets
themselves aren't scoring but they are
lighting up their
light the five points or 500 when
lit makes the score motor
start but you don't get the points so
why is the score motor
running or it
was now that stopped etc so it's got a
lot of issues now the lights are out
okay um it's still got a ton of issues
why does Whenever you score 50 points or
500 points it needs it it it can't give
you digitally 50 points it has to give
you five sets of 10 points so when you
score it it if it has to give you 10
points five times it needs a relay to do
that and so the relay pulls in the
50point relay pulls in it turns on the
score motor and then on the bottom U cam
on the score motor there's five little
bumps from home position to home
position like we were just looking at
and so that turns and it instead of
having this one switch
close that relay stays on until five
switches
close and that's what gives you your
five 10 point scores right so none of
that's working
um so some of this could
be like now it's just not doing anything
some of this could be um the score motor
thing that we've been messing with uh
but I think a lot of it's going to be
the player unit in the back box let's
drop this in the out hole and see if it
just gets
stuck
no it counted the thing down um it still
says ball in play number one
and now it's going to
Nope it's been getting stuck in this
one oh yeah so now we're playing on
player four you know so
um okay ball and play two maybe we're on
one but the lights don't work
so obviously lots of
issues so let me see show you the player
unit and gots of this generation there
is this player unit in the back that
basically runs everything and this this
big um wafer board or whatever you want
to call it here this cam this arm only
moves around one time per game so it
starts at one position moves to the next
position moves to the next position and
it moves each time that that there's a
new ball in play so player one ball one
is like here or wherever i'm just
guessing player two ball one player
three ball one player four ball one
player uh one ball two blah blah blah
and it keeps going right so there's a
position for 20 different ball positions
and then there are several positions
somewhere on here that are what it uses
to reset things so if position 21 or
whatever is game over it'll move to
position whenever you start the game
it'll move to position 22 which maybe uh
resets the score rules right right and
then maybe position 23 uh resets the
bonus unit and maybe position 24 blah
blah blah and then it finally gets back
to position one which is player one ball
one so since the scoring runs through
all of the scoring for all of these runs
through this if this thing is
dirty it will cause you all kinds of
problems now check this
out yeah uh-huh uh-huh yeah now you get
the point right so each position that
it's at there are cams on the back that
close and open all of these switches and
you see these are stacks of switches so
this player unit is as important as the
score motor in the bottom that we were
messing with so if you you know we've
messed with the score motor um that
didn't get us where we needed to be and
now we're up to messing with the player
unit so the first thing I'm going to do
is you can I'm going to turn it off and
if you take this screw
loose this thing I don't know if this
one's Yeah I think it's got hinges down
here if you take the screw loose this
whole thing will tilt down where you can
get to these switches on the back on the
cams all right so we got it folded down
and you can see how there's just I don't
know uh one you can kind of tell by
these long blades so 1 2 3 4 5 6
7 or 18 19 20 21 22 23 there's about 24
switches there and I'll show you why
it's a
problem look at that so is electricity
going to pass through that to the point
that it it reliably works probably not
so a lot of the scoring and the
resetting and everything um has to do
with the position that these switches
are in as this thing
turns but this coil pulls in and turns
it you can see that it steps through the
switches right and so you've got like
first player second player third player
fourth player or whatever and different
ones do different things depending on
the position that it's in so that's what
moves the scoring to here or there or
part of it at least um your score uh
relays also do that so I'm going to go
ahead and clean that and then we'll look
at the uh the um the little belite board
and what's going on on that as well all
right so here is this piece now you can
see these tracks on the the the panel
here the the plate that is actually like
a grease that was on on it from the
factory so whenever we put that super
lube on it we're basically uh doing a
similar thing to the factory so I'm
going to clean all these rivets up just
like we do all the stepper units put a
little super lube uh synthetic grease on
it and then we'll step through it and
see how if it looks like it's moving
nice and smooth all right so I have put
the super lube on it you want to get
this stuff that's dialectric we have
this at our website you can go to
lionsarcade.com there's a parts page
that we have links to a bunch of stuff
like that on Amazon if you're interested
in it um and some other things we work
on so what I'm doing is I'm pulling in
the plunger here just kind of manually
uh you know how whenever we started it
it
went very quick that's because it's
violently doing this because it's
electrically doing it so that's more
like how it does it
so if you're going like
this yeah it should step
forward right but that's not how the
game does it it does it very violently
there's a little bit of a recoil action
to it it does it so so fast so at the
beginning of the game let's say it's
right there to reset or let's say it's
at the end so let's say it's maybe these
are the end or whatever so the whenever
you're hearing
that D what it's doing is it's stepping
this back to first position and it only
moves in one direction so it moves to
the end of the balls and then it as each
as it goes through each further stage
it's using these rivets and the switches
to reset everything right so you just
want to make sure that it's able to
do able to move
around now at the beginning whenever it
was taking a lot of time to reset it
could have been because
um it was pulling in and that wasn't
moving that good because it the grease
was dried and it was dirty and all of
that right so we'll see so we'll see if
that fixed any of our problems i don't
know how many of our scoring issues
that's going to fix it may be actually
things on the scoring relays um but
we'll mess with that next after this so
let me plug it back in and we'll uh
we'll just play a game again and just
see if it's any different
all right let's see if it wants to act
any
differently so reset the four
player all right so the first thing that
we'll
notice
is the lights are on for the first
player so maybe we'll just look at that
while I'm play see if it scores
did not score it went down the 500 thing
and did not
score drop drop target scored
though or did
it no drop targets are not scoring all
right
bottom bottom 500 point uh setup did not
work either just like
before all right so I'll let you watch
this for a
ball we're on player four
again so
drop targets are not
scoring
and the 5500 thing is not scoring
either all right it moved to ball number
two in play so basically what we've
gotten is it made the lights work on
player
one and the ball is sticking in the
saucer like it was doing before okay so
that didn't fix much next up we're going
to mess with the um score relays in the
back box though and see what that does
all right so the next thing we're going
to do is we're going to clean the point
relays so N is the 10point one M is 100
L is a th00and and I think K is 10,000
or these may not actually use a 10,000
but N is always 10 and then it goes up
from there so we're going to clean those
and then these are used to reset
everything z1 Z2 and Z3 that's the
actual
um uh relay that this closes that
connects to each one of the score reels
so these are switches on each score reel
to reset them but these are to actually
score the points so we're going to clean
those next same thing you got dirty
contacts um I use a little light file to
go through them to to clean all of the
dirt and junk off of them so they make
good contact make sure nothing's uh
adjusted out of place and then uh we can
try from there we're actually in game
play so I may be able to just hit one of
the uh one of these and get it to score
i guess that would be a good way to test
what's going on yeah
so all right so yeah let me clean those
up all right so I cleaned those let's
see if this is any
better picked out the ball that's
good we've got our first player lights
on like we did it says ball and play
one did not score so that 5100 just
doesn't work so that's going to be
a that's going to be a problem with that
relay probably hanging on the bottom of
the playfield and it did the same thing
player it we're thought we're now at
player four again
now that's going to have something to do
with the uh relay bank in the bottom of
the uh playfield which we've already
cleaned
i can't tell if the if the U drops are
scoring or if like I said it's hitting
the the
the thing behind it so now we're back to
player
one that didn't score it says 100 that
didn't score didn't score didn't score
didn't
score that scores 10
so let's see if on the fourth
player okay so it went to fourth player
again okay let's see if it's scoring on
the fourth
player no it's not so the noise I'm
hearing is it just hitting
that all
right okay
so the problems have nothing to do with
scoring relays in this instance and they
have nothing really to do with the
player unit all that cleaning the player
unit got us in this instance was it lit
up the first player displays that
weren't lit up before um so uh I can
probably show you on the schematics why
that would be and then we're going to
look on the schematics and see why is it
always playing a game where player one's
playing and player four is playing it
two and three it skips over and then
once it's done with player four it goes
back to player one so you're playing a
two-player game but it's on player one
and on player four um but I think I know
why it's doing that so let's look at the
schematics a little bit and we should be
able to figure it out all right so I
haven't got the schematics in yet um you
can order those from the pinball
resource
pbresource.com that's the best place to
get Gotlib schematics but I can show you
a little bit of them so you can kind of
understand why they're so helpful to you
um this these are the schematics from a
similar era got and here are the lights
for the first player score
lights so this is the common connection
and then the way they get turned on is
by either the
XB relay which I think is the game over
relay so at the end of the game it
lights up all of the score lights just
for um kind of like an attraction
purpose whenever the game's um the
game's over and then P1F a normally
closed switch on P1F so if it's if
you're um this is drawn at ball one
player one is how they draw all of these
connections on the schematics so at ball
one player one that switch will be
connected p1f P means the player unit
and then one is the first stack of
switches and then F the first cam and
then F is that the top switch I guess or
the F switch so you can see that the
second player ones are turned on by P2F
so whenever it moves that cam on the
player unit that we were just messing
with it will turn on the second player
lights and then the third player lights
and then the fourth player lights so if
those aren't lighting up it very well
could be that switch now if at the end
of the game they don't light up it could
be the switch on the XB relay so the
reason that we got those lights back is
because we cleaned the switches on those
stacks and we just happen to clean the
P1F switch so you can go through and try
to hunt the problem but if you don't
clean every switch basically you end up
with it in the condition that it's in
right now where we're running around
trying to solve problems as we go
usually I just go through and clean
everything but I figured for the video
it'd be more interesting to just kind of
hunt down a few problems and see if they
go away whenever you clean certain
things so that is the score lights
problem now let me show you how their
replay unit their their ad player unit
works the player unit in the back this
thing's really remarkable okay so here's
the add player unit so our problem is
it's getting to the fourth player and
stopping instead of going past the
fourth player back over to the first
player so you saw how it moves rotary so
it starts at the one player and then it
moves to the next position is second
player next position is third player
next position is fourth player it's
stopping there instead of moving to the
next position which is first player ball
two which is what we needed to do it and
it does it every time over and over
again so if you look at what makes the
player unit actually step up uh it's
very complex it's this whole look at all
these switches it's this whole area
here oh and all of this area up
here okay
so here's what goes
on xb uh I looked it up it's not game
over it's last ball oh no i'm sorry xb
is extra ball so unless you you have won
a free ball this switch will be closed
so power is connected this is the power
side the neutral side is over there
power is connected through as long as
you're not getting an extra ball it will
connect through
here and it will connect
through
ZB um ZB is last ball i think I got that
right i think ZB means last ball so as
long as it's I better look at it let me
look and see what ZB is zb is the first
ball relay so if the uh first ball has
actually started so the way that turns
on is if you score a point so since this
is drawn at first player first ball it
the ball's actually sitting in the out
lane it hasn't scored anything yet so
this hasn't came on so as soon as that
comes on then it's possible for the
player unit to move up again they do
that so that you don't lose it doesn't
cost you a ball if you don't score any
points or it doesn't kick the ball all
the way out or whatever so as soon as
you score something that will be closed
well then it the power comes through
here and this is the interesting part
the PB2 PB3 PB4 power connects down
through
here and as the score motor turns which
it will because the ball is landed in
the out hole
um once the score motor starts turning
it will connect the
switch the P relay is the add player
unit relay that pulls in as the ball
kicks from the out hole to the shooting
lane right so as it kicks across it hits
the trough switch and it pulls in the
add player unit relay
okay so then it connects through there
and the motor's still turning and it
connects and it connects through here
two player reset switches i'm looking at
a two-player schematic first player
reset switches or this is a four-player
schematic and it connects through the
the Z1 relay and then it connects
through the Z2 relay which are connected
very complex isn't it Joey yep where's
the BR relay and after it connects all
that it's in there somewhere after it
connects through there it adds the
player unit one time so my whole point
is when the motor
turns that will add one
time so what are
these these switches are connected on a
oneplayer game first of all PB2 PB3 PB4
those are on the bank down in the bottom
that we already cleaned um there's a
normally closed switch on each one of
those now whenever you start a
two-player game what happens is this
relay the PB2 relay falls open player
two relay and it opens that switch well
if that switch is open it kills this
line so on a one player game these three
are connected because you haven't
started a two-player a three-player or a
four- player the power comes through
connects uh through the motor as it
turns and it adds the replay unit one
time if you were to start a two-player
okay so then it does that well at the
same time that it does that that is
closed and so as the score motor
um at whenever it whenever it connects
to the next player the second position
because it just the replay unit just did
that it will close this switch and since
you haven't started a second player game
it will go "Hey go ahead and advance one
more spot and go straight through again
right and then you haven't started a
third player game." So it'll same thing
when it steps up to the third ball one
player three this switch will close and
it will do the same thing so that steps
it up to the fourth position when it
gets to the fourth position it closes
that switch but since you haven't
started a fourth player game that switch
is still closed and it adds another
replay position
so then it steps it up to the next
position and there's no switch there to
that you know back to player one ball
two and there's no switch that closes on
player one ball two and so it just drops
out and stops at at player one ball two
so if you're having a problem with with
it stopping on one and not advancing
past past player four what's going on is
this switch is closing because you're at
that position but this switch must be
open what do you think Joe that's kind
of what I figured was going on thought
that was it okay Joey knew now when
you're starting the game something
completely different happens so when
you're resetting it here's how the reset
works i'll show you real quick when you
reset it this comes in this is the start
relay power's coming through here and it
goes into the same setup of switches but
it's bypassing all that crap we just
talked about with the one player the two
player the three player the four the
four player and the start relay is just
connecting the power right to there
now the start relay also has the motor
turning so that motor switch hits that's
why they've got that motor switch there
so that it'll work with the start relay
too and then it comes down here and
guess what it has at the same
time opened the Z1 relay and the Z2
relay it may do them at different times
but it has opened the Z1 relay that's
part of the reset remember I said in the
back that it it uh it uh uses those to
reset it so that switch is open and that
switch is open so you the power can't go
through there like we did a second ago
no it has to travel through all of the
score reels so the
10's on the second player reset switches
the 10's reel has to be at at the zero
position the hundreds reel has to be at
the zero position the thousand's reel
has to be at the zero position the 10
thousand's reel has to be at the zero
position and then it goes on the first
player reset uh reels the tens has to be
at the zero position the hundreds has to
be at the zero position the thousands
has to be at the zero position the
10,000s has to be at the zero position
and once those all get back to zero it's
it closes that switch on the top of
every relay and allows power through
here so that it can go past that now
once the game resets these close back
these turn off and that is just shorted
there so it doesn't matter if these
aren't at zero it will allow it the
player unit to move
so when the player unit gets to one
position if I remember correctly it
turns on the Z1 relay and then when it
gets to the next position it turns on
the Z2 relay or it may be backwards from
that but so once once all those get
reset player power comes down here and
then it can't go this way because this
one's open and then it has to reset all
of the third player ones and all of the
fourth player ones and when it finally
gets all of those reset wham it moves on
to the next position on the ad player
unit so it's a really complex thing
but it's a brilliant thing they did a
they did a hell of a job designing it
like it's just it's a really smart
design um now you can actually
see when it resets it sends power up
here into the player unit so when you're
on position 20
it is going to
turn on Z1 and then once those once
those uh reels all reset
that I just showed you Right now it will
add the player unit right so when it
adds the player unit it moves it to
position 21 well that will make Z1 turn
off and it makes Z2 turn on and then it
will stay there until all of those reels
reset and once those
reset it will move up another position
to position 22 which may actually be
position zero or position one and that
will turn off the Z2 relay so once those
are off you don't have to worry about
the power to add the player unit going
through all of those reels it can just
go through this little shortcut and that
little shortcut it's a it's a brilliant
design whenever you figure out how it
works you go "What a what a great way to
do it." So all of that to say I think
our problem with it stopping on the
fourth player is that switch white and
orange where it connects to white and
black
so there is PB4 the fourth player relay
we need the white and orange wire where
it connects to the white and black
wire is
that here and there and that's white and
blue
h it may be this one let me see if it
said white and black or white and blue
all right folks we'll try it again all
right so we have only started a one
player game if it was a if the four
player was on that if that relay had
fallen this light would probably be on
as
well okay so let's see if we got any
luck points still aren't working right
let's see if we go to fourth player or
first player
bam that's how you do it Joe yeah buddy
that's how you do it folks so that
switch was just a little It was the one
on the left you probably saw it just a
second ago the It's white with orange
the one I was looking at was orange with
white you'd think they wouldn't do that
just to be nice but nope they do that
all the time white with orange right
next to orange with white just to see if
you're paying attention so I hope you
were paying attention we'll uh next time
we'll work through it a little bit
deeper the scoring and stuff that isn't
working must be stuff on the bottom of
the playfield this is a particularly
complex uh scoring arrangement with
bonuses and stuff going on and cool drop
targets and I don't want to run through
the drop targets real quick i want to
show people how to how to mess with that
so we'll do that next time but hope you
enjoyed it that's a little bit how the
player unit works and um it's how the
the multiplayer design of the game works
and this is before they started using a
coin unit some of the later units used a
coin unit but they don't uh they don't
use it on these this is 73 or 74 I
believe so uh there you go hope you
enjoyed it leave your comments below and
we will see you on the next one now if
you like these old Gotlib games uh we've
done quite a few so uh we'll put up a
playlist here or another older Gotautlub
here that we've done in the past check
it out but we'll see you back here in a
couple days where we'll continue through
this Jack in the Box it's starting to
cooperate