Thank you to everyone who has been supporting our channel! If you use the link below before you purchase anything on Amazon, we get a royalty for sending you there, thank you!
Our store is located at 139 Caldwell St., Rock Hill, SC 29730.
ladies and gentlemen this is Joe's
classic video games back this evening
with another really cool pinball repair
video for you we got in this cool
Gottlob victory pinball machine this is
a system ATB I believe it came out in 86
is shady sevenish let's see if it says
it says copyright 1987 after they were
bought by premiere we bought this out of
a guy's storage shed we started working
through it
a few weeks back before Christmas we're
filming this a couple days after
Christmas still have the tree up
we bought this out of a guy's shed and
started working through it and so the
first thing we did was we started
working the play field it was fairly
filthy and so we pretty much got the
play field done and the game boots but
it doesn't it not everything's working
so we're gonna work through it and
finally knock it out over the next
couple days so I thought hey why not
film a video of that so people could see
what goes into these so this is what
we're starting with like I said the play
field has already pretty much been done
he's had a really cool it's the play
field is printed on mylar on just a
couple of the Gottlob games and so this
was one of them
and so it's in pretty good shape it's in
much better shape now than it was when
we got it but you know it's not perfect
but here it is so we're gonna work
through it
and get the thing up and playing and you
know what I think it needs first I think
what it needs first is some legs so I'm
gonna mount the legs on it and then
we'll we'll start working through the
board's a little bit see if we can get
this sucker acting like a real pinball
machine should
all right so that went pretty quick we
have installed the legs I think
originally these were supposed to be
crone but they had painted over them
whenever we bought the machine so we
painted back over them and made them
look even better and then we put new leg
levelers
and new bolts you could buy new chrome
ones and put them back the way they were
but that would be yet another cost we
would have to pass on to our customers
and the things are already way too
expensive but they want to do that they
can do that so our next thing that we're
going to do is we're going to work
through some of the boards in the back
so we're gonna check out the power
supply in the bottom and then we're
gonna check out the power supply in the
back box so I'll set that up and we'll
uh we'll see where we're at okay we put
the hood up and vacuumed out the inside
a little bit to clean it up a little bit
so like we always do whenever we fixed
these we just start from the wall the
power comes in it goes through a fuse in
them back there's the cord just refusing
them back goes through that I think
that's what do they call those things
that's the terrorists or something like
that anyway usually you know any problem
with any of that
and then it comes up here and this is
your first power distribution block so
you've got these three bridge rectifiers
which we tested and they were all fine
and you've got this is a system ADB and
you've got all of these fuses so all of
those a lot of people that replace the
fuses immediately you can if you want if
you just make sure you put the exact
same size in but usually you can just
clean them too and and if you've got a
problem with a with a fuse that's blown
that will point to a problem with the
machine so you can track it now we don't
have any blown fuses well also on the
Gottlieb's they were all of the system
ATS had ground problems so basically the
way it was designed these are all the
ground wires and they ground to the side
of the the power distribution block in
the bottom again this is a system ADB
the system ata and the system 80 which
were the earlier ones are
differently but on these they have these
plugs in the side so the problem that
you run into is if one of these loses
its contact with ground you'll get all
kinds of problems usually it'll make it
like a coil lock one or something or if
it's one of the grounds running to like
the main board you might get problems
where the board won't reliably boot
where it locks up or buh-buh-buh-buh
block so there's different ways you can
handle that you can see on this one that
one of the grounds or a couple of them
already burnt up got too hot just
because it was running so much I guess
amperage through it and so they put a
new connector with new plugs on it on
this unused top connector you can do all
that or what some people will do is
they'll tie them all together here
farther back and so that way if one of
them loses its connection over here it
can still connect through the other
wires to it that would help with your
ground issues if you have any ground
issues we may have to do that and then
like we said we're gonna clean all the
fuses but they're outside of the three
bridge rectifiers and this cap there's
not much to go wrong in the bottom
rather than the ground connections now
the cap on the earlier system 80s it's
always good I did a replace that if
that's that orange cap this one's to the
point where they're starting to get
pretty old too so if you want your thing
rock-solid you may want to consider
replacing this cap it is a 10,000 UF 25
volt so now we'll see if we've got one
of those that we can put in there to
replace it if you go up a little bit in
value 2 it's alright
here's underneath so we're gonna work on
that a little while get it a little
farther along and then we're gonna start
looking at the back box okay so we're in
the back box so once the power leaves
the bottom that we were just looking at
it travels up these wires in the middle
to this power supply right here so what
this always needs is this little
potentiometer here goes bad so you need
to replace that and we always resada the
connections on the bottom of the two
connectors this is your sound board here
usually doesn't need much work this is
an auxiliary power supply which i think
is mainly used for the sound board it
usually doesn't need much work and then
this is your CPU you can see it's still
got the original battery installed on it
which will be taken off luckily it
hasn't started to corrode anything or if
it has it's just minor and so we'll put
a remote battery connector I'm in a
remote battery holder down here
somewhere
and then this is the driver board which
again usually doesn't need too much work
on these you got to test everything
though so we will we'll get that power
supply out and start working on that and
then work through it a little bit
alright folks here is the power supply
we put a new potentiometer on it replace
that little cap because it was a what
they call those anyway that's someone
you have cap replaced it
there's another little cap down here but
it's ceramic so the easily doesn't go
bad no there's two of resistors there's
not much to these and a little tricky
whenever you replace the potentiometer
if you measure the resistance with the
old one in there then you can put in the
new one to preset it to that and then
it'll be about right whenever you put it
in it's doing the adjustment but it's
just a real simple board these don't
ever need replaced really because you
can replace everything on them really
easily they're just turning 12 volt into
fat though so we're gonna bolt that in
and pull the main board
okay folks so I took the mainboard out
installed a remote battery holder took
that battery off resolder the back of
the socket and that's a problem
sometimes replace the power supply and
adjusted the voltage to five volts and
the game is actually up in booting we've
got a little bit of a problem with the
display here that we'll have to mess
with figure out what's going on with
that but the next thing I'm going to do
is I'm going to replace all the light
bulbs underneath and the reason I'm
doing that is because I'm gonna work on
the driver board next and so I want to
see if there's any bulbs that I can't
get the light and then it seems to me
like there's a bunch of them here in the
middle and aren't working and then if
that way whatever I get the driver board
out I can start looking at specific
spots to see if the problem is the
actual driver board and here comes the
Popo okay so we replaced all the light
bulbs underneath the playfield and we
the reason I did that first was said
that I can try to track down which ones
didn't seem to be working right so
there's six that I was able to find so
these four right here do not light up so
I'm not sure what makes those light up
it's kind of weird that all four of
those aren't working and then we've got
this hundred thousand over here that's
locked on and then we've got a hundred
thousand one down here that never lights
up so those two there might be connected
and then I need to figure out what it is
that turns these on there might be a
relay or something that does it I don't
know or it they those may actually be on
those those two expansion boards
underneath that run these two strips
here they're unplugged right now so
those aren't working either but all the
audible all the other lights seem to be
working right and so next we're going to
pull out this driver board look it over
a little bit and I forgot to do the
ground mod on the main board in the
power supply side to take them back out
eventually but we'll do the ground model
in it and test all the transistors and
everything
okay so after looking through the
schematics and messing around with it a
little bit
there are these two axillary lamp boards
down here on the bottom tested
everything everything's right so ever
since we got it this one over here is
working we got a couple bulbs out but
this one this strip here was not working
but after looking through systematics I
figured out that there's a relay right
here that if it goes one way it turns
this one on and if it goes the other way
it turns that one and that also is why
the light is on off on off and it's why
this one down here so all the lamps are
working fine there are four here in the
middle I can't figure out what the deal
is with those these four I'm not sure
what makes those light up someone play
it a little bit and see if that does it
but we've got all of our lamps working
I took the driver board out and put a
ground wire on it i ground wire them on
the CPU to still have to do with the
power supply basically oil needs they
have a ground problem where you have to
tie all the grounds into the the ground
in the back box so that they're making
good connection because they use these
plastic standoffs to connect them to the
board so they don't get a good ground so
you have to put a actual ground wire on
the ground plane of that ground wire on
the ground plane of this ground wire on
the ground plane to the power supply and
attach them all together if you don't do
that what happens is sometimes there's
resistance in the lines and so this one
will be operating at a different ground
than this one and it causes problems
with the voltage difference so we
unplugged this little reset board
they're useless basically you don't you
don't any what that plugged in anymore
it will make the game reset when you do
not want it to reset so we're going to
play it a little bit and we're going to
mess with the flippers I also looked up
what the display is doing if you notice
the bottom is working fine but the top
is just jumbled so I'm going to show you
on the schematics
why that is alright so I'm looking at
the schematics and this is the display
in a system a DB game and I'm getting
jumbled characters on the top display
everything on the bottom display is fine
so if you look in the schematics here's
my display of course on this computer
when it's broken in half but so here's
my display and then here's my bottom
display which is working fine so since
the bottom display is working fine you
know all of this is fine D 21 through D
40 which comes from this you - chip Zhu
Rupa
and then you also to all these a threw
in are fine right which if you look they
threw in over here it's connected to the
a threw in on the top one - so in other
words they both get the same a threw in
signal and it curves around here and all
of those come from you three so you
can't really have a problem with you
three or do up both displays and you
can't have a problem with you - because
it's making the bottom display work
so this you won right this one all the
outputs for it all right here
and that's what drives the top display
it's so since it's the only thing that's
only on the top display it must be the
problem and then if you see this you -
is the same chip that's fed by db0
through db7 but if you look this u1 is
fed by the same thing so since the one
chip drives the second one and that
one's fine and the this chip drives the
first one and it's not fine it's pretty
much got to be this u one chip so I've
ordered some of these 1:09 three 9s to
swap in there for the U one to fix it
but I think I've got another display
that I'm gonna swap into it just to test
that theory if I put another display and
then that pretty much proves that it
can't be the CPU border
like that it's got to be the display
board alright folks so after swapping in
another display board as you can see
it's working fine so the problem is
definitely on the display board and like
we were looking at on the schematics
that's probably that you won chips I've
got one of those ordered I'll fix that
other board but until then this one will
live in this game so we've done about
all of the electronic stuff we can do
and all that's left now is to do some
little finish up stuff rebuild the
flippers things like that some cosmetic
stuff and then get this thing put back
together and I will film a separate
video that showing off like how the
games design and the gameplay and all
that but I would figured we just shoot a
little video for you showing you what's
involved in going through one and kind
of bring it back to life whenever you're
it's in unknown condition so we hope you
enjoyed the video working along with us
a little bit and we'll see you on the
next one if you liked the video give us
a thumbs up since we took the time to
film all this instead of just blowing
through it and not not letting you see
any of it if you liked the video give us
thumb up leave your comments below and
we will see you on the next video