Thank you to everyone who has been supporting our channel! If you use the link below before you purchase anything on Amazon, we get a royalty for sending you there, thank you!
Our store is located at 139 Caldwell St., Rock Hill, SC 29730.
ladies and gentlemen this is Joe's
classic video games back with another
cool pinball repair video for you today
we've been working on this lost world
pinball machine and we've almost got it
but it's got a few things left we need
to mess with the flippers and we need to
mess with the shooter rod and we need to
fix this freaking door Joe is this the
worst door you've ever seen yeah Joey
says it's the worst door he's ever seen
look at this thing
so we looked and you can get a new skin
for the door for $90 but people we've
already we've spent so much on this
thing Joey will you spend $90 on a new
skin for the door he says he won't spend
$90 for a new skin for the door so our
only option is to try to beat the damn
thing back straight and it's I'm gonna
get like it's really screwed up look at
all this so we're not gonna get it
perfect there's no way it's gonna get
perfect but we can definitely get it
better than this look at this crowd I
don't even understand how they got it
that bad I mean I understand people kick
a door sometimes but like how did this
happen you know I guess people trying to
pry it open steal money out of it see
the hole here they had a security bolt
there at one at one point you know so
this would have had like a big flat
blade on it or well there's one over
here too so they probably had a bar that
went across or something but if you
haven't been watching this whole series
this game was beat all to crap to start
with and we've got it pretty nice it had
been parted out even missing the back
glass so we've ordered a new back glass
we put new LED displays in it we were
able to save the original MPU board you
know so we didn't have to spend money on
that we had to repaint part of the
playfield but we did have to spend money
on the back glass and the LED displays
so we're trying to save a little money
here and not spend that 90 bucks and
like you just heard Joe he won't do it
anyway so we're going to take this coin
door I'll take the skin off and then try
to beat it back flat with a hammer and
see if we can at least get it
presentable
where people will not throw up whenever
they see it and we're going to try to
clean off the all of the the filth the
filth needs to go so all on boat it from
the machine and we'll see how it ends up
all right Sammy Jo and Sonic the
Hedgehog took this off there was just
four screws holding it to the hinge on
the solid states you can less I think
it's only ends to that they had a little
different thing at Jones plug but on the
solid states you can just unplug it so
this thing it's also got the lights
don't have wiring two of them anymore
somebody's been a barely keeping this
one a lot of people okay so we got off
the game so it's the worst spot there so
we're going to take this back plate off
so we can get down to just the skin and
we'll see how beat up that looks okay
folks so we took all the stuff off about
five minute job if you have to do it
yourself
it'll be about a 30 minute job to put it
back because I won't know where
everything goes but it will be alright
so this is what we're starting with all
that's pretty good because it was
covered all this is pretty bad
[Music]
Jovie are we going to get it perfect no
no we're not going to perfect definitely
not definitely this way I get it better
than this look out of interest
it's all beat up because people are
kicking it and stuff want them quarters
real bad you think this was on a skating
rink seeing a roller skating rink
you have the same kids being a little
terrorists as they are at every other
location except now they've got five
pound weights strapped to their feet
that they can kick things with so it may
have been a roller roller skate damage
alright so Joe is going to take it
outside and beat the hell out of it with
a hammer I don't know why he's got a
mallet that will help Joe alright we're
gonna take it outside and beat the hell
out of it with a hammer on this board
and see if we can get it flat so let's
go film some of that alright
so Joe has put it on a piece of plywood
and he's now going to beat the hell out
of it with a hammer and a piece of 2x4
they try not to hit try not to hit that
center diamond you're not I mean that
was a atom dense I think
[Music]
hmm so far that's better
oh yeah we're fixing the hell out of
this you know if you need to get over it
our breasts are done ate fix the hell
out of it say it louder what I was just
doing that one little lip around the
coin return void it'd be set
people keep leaving as comments saying
how much does it cost for you to restore
something I'd say well I don't really
consider it restoration now people know
what okay you get it kind of flat where
it's kind of right we can put a board
behind it and then beat every one of
them little dents with a board behind it
you know what I mean yeah let me see if
I can go get a little piece of 2x4 all
right we're gonna try to beat it out
with that bat woodwork we kind of need
something metal really so all we've got
to this old isolation transformer it
doesn't work anymore so we're gonna try
the - I think the wood might be too soft
up all right Joe the ends probably no
but I guess you could lay it down flat
and they put it like in the corner
and then you know what I mean now that
it's nice and flat and it's supported
worse or better okay now turn it over
and do the same thing on that side who
we really need is Jesse James he would
had this fixed already what was the guy
in Florida the cool guy that rode all
the way across the country all that one
bike he built he was building the whole
things by hand all of them yeah that was
him
he's probably by now
all those everything
really folks we didn't have my choice
look horrible we're getting elected
that's kind of a better it is beat up
but it ain't it is a lot more flat
[Laughter]
nobody that's look I mean you did peace
out it's just now you put a bunch of
more smaller ones in okay but we'll keep
working it and see how good we can hit
it okay folks we got most of the big
dents hammered out beat the crap out of
it we just flipped it over and over and
over again on that board like beat them
that way and then turn it over and beat
it again until it got it kind of flat
it's not perfect we're obviously not
metal workers we don't have much
equipment we're using a hammer and a
two-by-four but what we're going to do
is we're going to clean it up they never
want to spray it with hammered spray
paint and hopefully that'll make it look
a lot better so we'll see what happens
[Music]
okay folks so this is after cleaning and
Joey's sanding it a little bit now what
did you say about it Joe this is how
Joey describes it it ain't no that bad
it ain't all that bad he says okay so
we're gonna put some paint on it as if
it's still it ain't all that bad
they're looking kind of dinner Joey
works at work coming up with
conspiracies of how we can hide on Sodor
with various stickers and stuff
a little bit of that hammered gray on
there and was hammered boy it gets
hammered all right hey if the guy that
buys it complains now we don't have a
customer yet people so just so people
don't freak out we're fixing this and
then it's precise ourselves so somebody
doesn't like it that way
full knowledge that it was like that
when they bought it right so yeah if
they ask any questions we'll just say
that's what hammered paint looks like
yeah
okay folks that's how it ended up not
bad we've cleaned up our little
faceplate gonna add it back on that's
gonna help it a lot I think so I'll
start screwing the stuff back together
we're cleaning it as we go said it looks
good we got all kinds of noise in here
hey your arcade games keep it down back
there trying to talk bolt it all back on
and see how it looks when it's done what
do you think I think it's presentable I
think once we bolt it on the cabinet
it'll look a lot better get a nice
little key installed not bad okay so now
we're gonna look at the flippers for a
minute one of them keeps sticking okay
so I popped a hood on this bad boy and
so I was test playing it and when I hit
this right flipper button the flipper
sometimes would stick up okay
so I didn't have a glass one so what I
did was I tried to push it back down and
so by doing that you can tell if it's
just if it's just barely holding up like
some kind of mechanical thing or if
you're getting power fighting you right
and I was getting power fighting me so
the power is screwed up somehow so what
that means is this switch was getting
stuck here I'll just zoom in now while I
was just standing there I pushed that
button
let me get a flashlight so you can see
it better
okay so see how it is stuck together
right now so that's the deal Lucille
so the switch itself is sticking and
that's what that's why now why is the
switch sticking zoom back in and we'll
see if we can get it to do it again
yes it's stuck right there see now it's
open so it's just adjusted a little too
close to itself and there's probably
pitting on those contacts in there so I
need to clean the contacts I'm gonna use
a file and file down the contacts and
I'm gonna adjust it out a little bit so
that it's a little farther away and that
should fix my flipper sticking problem
and then of course I'll do the other
side too okay so one of the problems was
both of them this screw is loose look
what ends when I push the button see the
red thing moving that screw is loose I
don't know if it's because they did that
on purpose there was just worked its way
out over the years so when I got it nice
and flat on that side it no longer stuck
so then I sanded I used a little file on
the context now you don't want to sand
you don't want to file any contact just
the ones that are designed for but let
me show you something interesting here
I learned this years ago if you get one
that you've worked through and it the
flippers start sticking up like that
like this one just was I just sanded
those contacts look at that see all the
dust on the on the stack there that's
all metallic shavings that just came off
the con off the contacts that is
conductive so sometimes you'll get the
same thing where it's not enough to to
make the flipper flip but the conducting
the shavings are conductive and they'll
leave the flipper stuck Oh
stuck-up so after you after you shave
them you always have to blow the dust
off right so make sure you get rid of
all the dust on that a few if you clean
them okay the next thing we're going to
take care of the shooter rod the springs
are all worn out and broke and all of
that a lot of times I don't replace
these but whenever they're like this and
see up here where it's already broken on
itself whenever they're like this that
they don't they just don't do the thing
like they need to so I take it off you
take course the rubber tip off and then
if there's a little c-clip here it's a
little different on some of the other
games but there's little c-clip here you
take off and then all that stuff can
come out okay so once we take it apart
as you can see the springs have actually
broken that's why they're not working
right so that one's broke this one
actually broke into four different
pieces five different pieces four
different pieces so these are super
cheap you can get them all over the
place they're not all the same size
though like I don't know if that's the
right length or not some of them are
taller than others and so you got to
kind of just eyeball it and see if it
looks like it's about the same actually
that does kind of look the same and then
sometimes the shooter rod housing like
where it hits the ball it'll be
mushroomed out at the end a little bit
and you'll figure that out whenever you
try to pull it out this one is there's a
little bit of something going on there
but it's not enough that I got to worry
about it because it came all the way out
so I'm gonna put new Springs on it and I
got the long ones here also depending on
which long one you put in it'll change
the amount of force that the shooter rod
has and you might think yeah make it
real strong it's not always what you
want it just depends on the game and
like on this game a lost world a really
strong one wouldn't help anything it
might break something so I'm just gonna
try to get one that is good enough to
get the ball up the shooter Lane
much better okay we're getting down to
the end where there's only a few things
left to do to the game one of the things
we have to do is we have to mess with
the flippers a little bit on these older
on these older valleys the early solid
state ones the flippers are strong as
hell I mean it worked great usually and
they already worked fine on this game
but I'm going to make them a little bit
better just for preventative maintenance
now that we've fixed where they were
sticking because of the switches the
only thing I'm going to do is I'm going
to put new nylon sleeves and the coils
I'm going to put new plungers on them
because there's a little bit of wear in
the plunger and then we're going to
clean of course the end of strokes which
is there because some of the power runs
to it
but the way you can tell them if you
need new plungers is if there's wear in
them so see how that will move before
the plunger moves that's because that
hole in there is elongated and whenever
it does that when this pulls in it has
to some of your some of your slap is in
the slop you know what I mean so it
makes them weak so whatever they're like
that I've swapped the plungers and I put
a new nylon sleeve inside the coil
sometimes they still have the old metal
ones in it the coils usually don't
weaken if there's if there's a problem
with your flippers it's usually never
the coil unless the coil is burnt up and
the sleeve is stuck in it or the it's
open so it doesn't work anymore or
shorted so that it's always on and it
blows that'll blow a fuse if that's
what's going on though so usually the
coil is a works or doesn't work type of
thing so unless it has physical damage
where the swards heated up so much that
the sleeves stuck in it just leave the
coil you don't have to replace it you
can also replace other things you can
put a new pall on it but I don't get I
don't see much wear on those sometimes
you do need to replace it in two-stroke
switches if these if these contacts are
pitted too much sometimes you'll see
where it's the blades have burnt through
and everything else sometimes they've
they've got
serious damage that need to be replaced
sometimes the coil stop needs to be
replaced whenever you take that off if
the the end of it is all messed up
sometimes the coil stop can be
magnetized to where the the flipper is
staying up but it's more of a mechanical
thing so whenever you turn off I guess
if it's magnetized it wouldn't be but
sometimes it will be magnetized where
the the the pawl will stick in and then
if you just barely touch they'll come
back out so so yeah not too much to them
and you can also you know if it's your
only machine and you're you don't mind
spending the money you can buy a whole
kit and rebuild everything on the
flippers it's not that expensive
probably fifty sixty dollars but it's a
little overkill usually you just need
new plungers and new coil sleeves
sometimes in a stroke switch so I'll
take it apart we'll put a new new core a
new coil sleeve in it and new plungers
and we'll see how they look after that
all right there were no big surprises
new links new sleeves cleaned and
adjusted the end of stroke switches
here's the old sleeves they just get
filthy and worn
here's the old plungers the link is
actually just this part but you know we
replace the whole thing there about I
think they're five or six bucks but you
can see how the end it started to
mushroom them up too you can again there
you go so what happens is that gets all
mushroomed up from hitting the coil stop
and then as it drags back through the
sleeve it scratches the inside of this
nylon sleeve and then it makes it where
it'll get hung in there and things like
or it slows you down you have a little
friction and then of course the the slop
in that as well as the oh how elongated
that hole is it's giving you all kinds
of sloppiness and your flippers and you
don't want sloppiness you want
happiness snappy good sloppy bad okay so
I'm gonna I'm gonna screw the coin door
back on we're gonna button it up a
little bit and then I got to put a lock
on it okay so we threw a new lock in I
always loved away these works so you
know the door is open here you close
that back and the back glass goes in
front of it it's literally a big sheet
of glass and the way this lock up here
works is so it's locked right now you
put the key in and you turn it and what
it does is it moves a bar that's on top
of the glass back out of the way see the
little hook there's one on each side
well when I lock it it moves it in on
top of the glass so that if you lift the
glass up it hits that metal bar and it's
locked its unlock it you just turn it
back and move that out of the way and
now the glass can go up into a slot in
the top of the cabinet pretty cool all
right
and the coin door come on people and you
can't even tell like on this video you
can't like on the shot right now you
can't even tell it's not that big of a
deal so let's compare it we've been
looking at this ugly coin door of this
whole time right so here I'll make it
the size of the of the camera looks
completely fine right okay now I'm gonna
move over to a Gottlob spider-man that
we're working on come on it's in similar
shape look that one's got a credit
button somebody drilled on it
okay so we're working on the gentleman's
Bally skate ball you'll see those videos
soon those banged up a little bit at the
bottom okay here's our Bally rapid-fire
that we've had for so long right
here's a williams pat hand that we're
messing with and here's a Williams I
won't tell you what this one is this
will be a surprise this is an old
William ZM so you know come on doesn't
look that bad folks it's not perfect but
it doesn't look that bad
so that is our I believe this video will
be on a Friday what do you think about
this is our Friday video all right so
let's see if the plunger works all right
if we've got a credit on it we do and
look I finally put the pinball where
it's supposed to go okay well she
plunged oh yeah look once you rebuild
the pop bumpers they play themselves
people look at that so will the flipper
get stuck didn't quite hit it hard
enough to knock it all the way back all
right so I'm gonna change my camera hand
I hope I don't drop it like I did that
other time it was horrible let's try the
right one
it's not getting stuck people pretty
cool alright so we were test playing it
I see two things wrong with the cabinet
one of them I'm going to fix one of them
I'm not okay so you may have seen
something wrong while I was playing it
there since I've since I test so many of
them I always catch it or I catch more
of it okay so one thing that I see wrong
is we never got the coin door bulbs to
work because they cut the wires out of
the harness why would you do that oh my
god
why do people do stuff like it biggest
pain in the ass like they've got to run
wires all the way back so it may not end
up with coin door bulbs it's on free
play anyway so that's one thing and then
the other thing you may not notice but I
noticed when I test played it the other
day which was probably yesterday's video
I don't know I haven't uploaded these
yet so you know when I test played it
the other day and then when I'm tested
just now at the end of ball two when the
ball landed down here it didn't in the
ball and it did that the other day to
say that switch is dirty in the alcohol
right now when I started flipping the
flipper it mess and move the ball a
little bit and it made the switch sense
it so so I'm going to clean that and
then we're going to play it and
everything but that will be on a
different video you know why because
we're doing a video every day this week
now when I say every day I don't mean
Monday through Friday oh no we're gonna
have videos on Saturday and Sunday this
week too
so in honor of my brother Donnie we're
gonna do a video every day like he does
he's a video making fool so if you
haven't seen it yet we have another
channel that's ran by my brother Donnie
who was literally my brother Donnie and
he and I are working on an old mobile
home that we bought that was beat all up
and we're fixing to the
and lots of crazy things have happened
everything in the thing has been broken
we've tried to fix everything and we're
gonna rent it out whenever we get done
so go check that out if you get time it
has nothing to do with arcade games but
it's pretty funny and Donnie's a
complete character he does a lot of
small engine repair and things like that
that's pretty interesting to watch he's
one of those people that believes where
there's a will there's a way
so there'll be a link down below you can
go check it out and subscribe to him if
you'd like I'm on that channel a lot too
and then finally I'll say if you look
down below there will be a link to our
Amazon page if you click that link you
don't have to sign up for anything or
anything like that it's just if you have
the notion if you get the notion I'm
thinking that song I'd like know and you
got the notion so if you get the notion
that you want to buy something on Amazon
click our link before you do it and
amazon says oh hey look they just came
right from Joe's video games and they
give us some of Jeff Bezos money so I
would like to thank everybody that's
been doing that tons of people have been
doing that and that's pretty cool we're
not going to charge people to watch our
videos we're not going to set up a
patreon account or anything like that we
don't want you to donate your money to
us or send us your money but if you did
you feel like you want to help if you
click that link before you buy something
on Amazon anything a toothbrush or a
Ferrari it gives us a little percentage
of whatever you buy and it doesn't raise
your prices or anything and you don't
have to create an account or sign up for
anything it's that easy right so leave
your comments below let us know what you
thanks so far this sucker how do you
think the coin door came out you want me
to you want me to stand to the side so
you can see the light hit it
I don't know man looks perfect on this
angle okay so leave your capsule well
let us know what you think about it and
we'll see you tomorrow